Telefoonhouders
203 products found
RAM® Quick-Grip™ XL phone holder with Twist-Lock™ suction cup – medium
This suction cup holder for car windscreens includes the spring-loaded RAM® Quick-Grip™ XL holder that provides a secure fit for various large phones and other devices. The adjustable side arms ensure the device stays in place during rough rides and in landscape orientation. Included is a medium-length B-size socket arm, a B-size RAM® diamond ball base with 1" ball and supplied mounting hardware. Thoroughly clean the surface on which you mount the suction cup to ensure a secure grip.
109,86 €*incl. VAT
90,79 €excl. VAT
RAM® Quick-Grip™ XL phone holder with Vibe-Safe™ & U-bolt base - short
The RAM® Quick-Grip™ XL phone holder with RAM® Vibe-Safe™ & U-bolt base - short (RAM-B-149Z-A-PD4-462) is a combination of the RAM® Quick-Grip™ XL phone holder and the RAM® Vibe-Safe™—our vibration-dampening accessory designed to protect electronic devices from a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and offers the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments. This product includes one (1) short B-size arm and one (1) RAM® U-bolt base that fits rails from .5" - 1.25" in diameter. The holder is compatible with handheld devices that fit within the dimensions listed below; it is important to check the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
162,14 €*incl. VAT
134,00 €excl. VAT
RAM® Quick-Grip™ XL Phone Holder with Vibe-Safe™ and Fork Stem Base - Short
The RAM® Quick-Grip™ XL phone holder with Vibe-Safe™ and fork stem base - short (RAM-B-176-A-PD4-462) is a combination of the RAM® Quick-Grip™ XL phone holder and the RAM® Vibe-Safe™ — our vibration-dampening accessory designed to protect electronic devices against a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and offers the versatility to rotate between portrait and landscape orientation while keeping your device secure in rugged environments. This product comes with one (1) short B-size arm and one (1) RAM® motorcycle fork stem ball base and an optional device tether recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions listed below; it is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
167,16 €*incl. VAT
138,15 €excl. VAT
RAM® Quick-Grip™ XL spring-loaded phone holder with screw-in base
This version of the spring-loaded RAM® Quick-Grip™ holder offers a secure fit for numerous large phones and other devices. Included are a medium-length RAM® dual cup arm and a screw-in 2.5" round ball base with the universal AMPS hole pattern. The ball-and-socket system provides shock and vibration damping and allows near-infinite adjustability to achieve the ideal viewing and operating angle for your device.
91,46 €*incl. VAT
75,59 €excl. VAT
RAM® Quick-Grip™ XL Type-C vehicle bundle
This USB Type-C vehicle bundle is ideal for keeping your phone charged and secure on the go. The bundle includes the spring-loaded RAM® Quick-Grip™ XL phone holder connected to a diamond ball adapter, medium-length double socket arm, RAM® Twist-Lock™ suction cup base of 3.3" diameter, USB Type-C 3.0 cable and the GDS® 2-port USB cigarette charger with Qualcomm® Quick Charge™ capabilities. This XL version of the RAM® Quick-Grip™ phone holder has adjustable side arms that provide a secure fit for various large phones. In addition, the RAM® Twist-Lock™ suction cup base is ideal for car windscreens, while RAM® ball-and-socket technology allows virtually infinite adjustability of your holder, so you can achieve the perfect viewing and operating angle for your device. The slim design of the GDS® 2-port USB cigarette charger fits easily into your dashboard and compatible phones can benefit from Qualcomm® Quick Charge™ 2.0 and 3.0.
153,44 €*incl. VAT
126,81 €excl. VAT
RAM® rotating X-Grip® large phone holder with flexible adhesive base
The RAM® rotating X-Grip® large phone holder with flexible adhesive base (RAP-B-378-UN10RU) consists of the flexible adhesive base with 1" ball, double socket arm and universal X-Grip® rotating phone holder. With a PSA adhesive pad, you can place the flexible adhesive holder virtually anywhere you want to keep your portable electronics clearly visible and within reach. The base is designed with a very small footprint, making it easy to find a mounting location on your scooter, motorcycle, kayak, boat or vehicle dashboard. The holder features a B-size 1" patented rubber ball-and-socket system with adjustment points at both ends of the double socket arm; this enables virtually infinite adjustment and perfect viewing angles. The included X-Grip® holder has a sleek and smart four-legged design that provides an excellent grip without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your mobile phone and features rotating hardware that lets devices turn between landscape and portrait orientation without having to adjust the whole system. The X-Grip® includes a device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions below. It is important to verify the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
108,26 €*incl. VAT
89,47 €excl. VAT
RAM® screw-down mount with spring-loaded phone holder
The RAM universal spring-loaded clamp holder features side clamps with rubber bumpers that adapt to the width of your device and secure it in the holder. The feet at the base of the holder can tilt and slide, creating an opening to accommodate larger devices. With a release button at the bottom right of the holder, you can quickly release your device. Also included are two thread inserts and a set of two nuts/bolts to attach the holder to RAM-compatible mounts. The main mounting applications for the clamp holder are LOW VIBRATION environments, including cars, trucks and fleet vehicles. The RAM-B-138-UN5U also includes a medium length B size arm and a 2.5" diameter round plate with the universal AMPS hole pattern.
95,23 €*incl. VAT
78,70 €excl. VAT
RAM® Stubby™ cup holder for Apple MagSafe (2020)
The RAM® Stubby™ cup holder for Apple MagSafe® Charger (2020) (RAP-B-299-4-AP-MAGU) is designed to integrate the official Apple MagSafe® Charger (2020) into RAM® ball-and-socket mounting systems, for a safe, reliable mounting solution in the vehicle. This adapter provides a snug, precise fit for the original Apple MagSafe® charging puck, allowing compatible iPhone models to click magnetically into place when correctly aligned. This kit includes the RAM® Stubby™ cup holder base and the medium-length B-size socket arm, compatible with any vehicle cup holder with an inner diameter of 2.57" to 3.5". This product is compatible with the original Apple MagSafe® Charger released in 2020. It is not compatible with the newer Apple MagSafe® Charger released in 2024 and later. Not sure which MagSafe® charger you have? If your charging cable is braided, it is a newer 2024+ MagSafe® Charger. If the cable is smooth with a soft rubber housing, it is the original 2020 MagSafe® Charger.
86,77 €*incl. VAT
71,71 €excl. VAT
RAM® Stubby™ cup holder mount for Apple MagSafe (2024+)
The RAM® Stubby™ cup holder mount for Apple MagSafe® Charger (2024+) (RAP-B-299-4-AP-MAG-1U) is designed to integrate the official Apple MagSafe® Charger (2024+) into RAM® ball-and-socket mounting systems, providing a secure, reliable in-vehicle mounting solution. This adapter provides a snug, precise fit for the newer Apple MagSafe® charging puck, allowing compatible iPhone models to click magnetically into place when correctly aligned. This mounting kit includes a RAM® Stubby™ cup holder base and a medium-length B-size socket arm, perfect for small and medium cup holders in your vehicle. The RAM® Stubby™ cup holder base is compatible with any vehicle cup holder with an inner diameter of 2.57" to 3.5". This product is compatible with the newer Apple MagSafe® Charger released in 2024 and later. It is not compatible with the original 2020 MagSafe® charging puck. Not sure which MagSafe® charger you have? If your charging cable is braided, it is a newer 2024+ MagSafe® Charger. If the cable is smooth with a soft rubber housing, it is the original 2020 MagSafe® Charger.
84,69 €*incl. VAT
69,99 €excl. VAT
RAM® Tough-Charge™ 15W waterproof wireless charging motorcycle holder
The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging holder for phones. Designed with spring-loaded RAM® X-Grip® Technology, this holder has an 'X' design that expands and contracts to secure virtually any phone while you benefit from Qi wireless charging of your phone. All four arms have rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches on the sides of phones accessible. To insert your device, simply squeeze the arms on one side of the holder and place your phone in before releasing the arms. This Qi-compatible wireless charging holder ensures your compatible phone charges regardless of the position in which it is placed. For extra security and peace of mind, a device tether is included that is recommended for outdoor use. In addition, a support leg can be adjusted to the ideal position or removed entirely. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging handlebar kit includes a B-size diamond base with a 1" rubber ball, a short-length double socket arm and a zinc-coated U-bolt base. The U-bolt hardware fits rails from .5" to 1.25" in diameter. The connected Type-A male pigtail connector has an in-line switch that lets you turn off the wireless charging module when not in use. For in-vehicle charging, connect the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwire charger.
306,95 €*incl. VAT
253,68 €excl. VAT
RAM® Tough-Charge™ 15W wireless charging holder with Tough-Claw™
The RAM® Tough-Charge™ 15W wireless charging holder with Tough-Claw™ (RAM-B-400-A-UN12W-V7M-1) is the world's first patented, waterproof, universal wireless charging holder for phones—built to withstand rugged environments while keeping your device charged and accessible. With the spring-loaded RAM® X-Grip® design, the holder's signature 'X' arms expand and contract to firmly hold virtually any smartphone while delivering reliable Qi wireless charging. Rubber-coated end caps on all four arms grip your device firmly, and the open-frame design keeps side buttons and ports unobstructed. To insert your phone, simply squeeze one side of the holder, place your device and release. This waterproof Qi charging holder delivers consistent charging in virtually any orientation. For extra confidence during aggressive driving or outdoor use, a device tether is included. A removable and adjustable support leg provides added stability. With the Tough-Claw™, you can quickly mount the charger onto round, square or irregular rails and bars from 0.625" to 1.14" in diameter. The connected Type-A male pigtail has an in-line power switch to turn the charging module on or off as needed. For in-vehicle setups, simply connect the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit also includes a hardwire charger for direct power integration. For open-cockpit applications (e.g. motorcycles, ATVs, boats, etc.) apply silicone grease to the USB Type-A male & female connector to protect the connections and prevent corrosion. Failure to do so voids the warranty.
331,79 €*incl. VAT
274,21 €excl. VAT
RAM® Tough-Charge™ 15W wireless charging suction cup holder
The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging holder for phones. Designed with spring-loaded RAM® X-Grip® Technology, this holder has an 'X' design that expands and contracts to secure virtually any phone while you benefit from Qi-compatible wireless charging of your phone. All four arms have rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches on the sides of phones accessible. To insert your device, simply squeeze the arms on one side of the holder and place your phone in before releasing the arms. This Qi wireless charging holder ensures your compatible phone charges regardless of the position in which it is placed. For extra security and peace of mind, a device tether is included that is recommended for outdoor use. In addition, a support leg can be adjusted to the ideal position or removed entirely. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging suction cup kit includes a B-size diamond base with a 1" rubber ball, a medium-length double socket arm and a RAM® Twist-Lock™ suction cup. The connected Type-A male pigtail connector has an in-line switch that lets you turn off the wireless charging module when not in use. For in-vehicle charging, connect the pigtail to the included 1.2m Type-A male to Type-A female extension cable.
265,27 €*incl. VAT
219,23 €excl. VAT
RAM® Tough-Claw™ small clamp holder for phones with OtterBox uniVERSE
The RAM® Tough-Claw™ is the ideal solution for mounting your OtterBox uniVERSE-protected iPhone or Samsung Galaxy S7/S8 on seat posts, handlebars and more. Without tools, this ball-and-socket system provides vibration dampening and the ability to easily set the perfect viewing angle. The RAM® Tough-Claw™ combines protection and versatility and can be clamped onto round, square and irregularly shaped rails and rods, while fitting all OtterBox uniVERSE phone cases.
113,57 €*incl. VAT
93,86 €excl. VAT
RAM® Twist-Lock suction cup mount with universal phone holder
The RAM-B-166-UN1U Twist-Lock suction cup mount consists of a 3.3" suction cup locking base, diamond base end and universal holder for mobile phones. The holder is equipped with the patented RAM system with 1" rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles. The holder is designed to hold a wide range of different mobile phones and small electronic devices. This holder has padded locking side clamps that close firmly around the item you want to hold. To release the clamp grip, simply press the button at the bottom left of the holder, which springs the clamps open. At the base of the holder there are two small supports to keep the bottom of the item securely in the holder. Simply attach the suction cup base to the windscreen of your vehicle for an easy and secure way to view your handheld device in your vehicle. High-quality materials ensure that your electronic device is safe, secure and within reach. RAM's patented design also dampens shocks and vibrations, which helps extend the life of your mobile device.
131,51 €*incl. VAT
108,69 €excl. VAT
RAM® Twist-Lock™ composite suction cup mount with RAM® Quick-Grip™ holder
The RAM® Quick-Grip™ with Twist-Lock™ suction cup consists of a suction cup base with 3.3" diameter, composite double socket arm and spring-loaded holder for most phones. The Twist-Lock™ suction cup is designed to attach firmly to any windscreen, glass and non-porous surface. The double ball-and-socket design provides adjustment points at both ends of the socket arm with a twist of one knob, allowing you to position your phone in the optimal viewing position.
89,46 €*incl. VAT
73,93 €excl. VAT
RAM® Twist-Lock™ low-profile suction cup mount for Apple iPod Touch Gen 4
The RAP-B-166-2-AP10U consists of a double socket arm, Twist-Lock™ suction cup base, diamond adapter base and a custom-made high-strength composite holder for the Apple iPod touch 4th generation. The Twist-Lock™ suction cup base is designed to attach firmly to glass and non-porous plastic surfaces, including RAM® adhesive discs. The holder incorporates a patented 1" diameter rubber ball-and-socket system, with adjustment points at the base and the holder. With a turn of the arm knob you move the iPod touch holder to your optimal viewing position.
48,80 €*incl. VAT
40,33 €excl. VAT
RAM® Twist-Lock™ suction cup holder for OtterBox uniVERSE phone cases
Mount your OtterBox uniVERSE-protected iPhone or Samsung Galaxy S7/S8 to your windscreen for access to GPS navigation and more while seated in your vehicle. This rugged RAM® Twist-Lock™ suction cup holder is specially designed to fit your OtterBox uniVERSE phone case and provides a strong and secure attachment to glass or any non-porous surface. Attached to a vibration-dampening ball-and-socket system and with easy viewing adjustments, this is the perfect vehicle mounting solution for any OtterBox uniVERSE phone case.
87,51 €*incl. VAT
72,32 €excl. VAT
RAM® Twist-Lock™ suction cup mount for Apple iPhone 6 & 7
The RAM-B-166-AP18U consists of a 3.3" Twist-Lock suction cup base, double socket arm and high-strength composite cradle. The Twist-Lock suction cup base is designed to grip strongly on glass and non-porous plastic surfaces. A patented 1" diameter rubber ball-and-socket system is integrated into the mount, with adjustment points at both ends of the socket arm; with a turn of the arm knob you can move the mount to your optimal viewing position.
70,30 €*incl. VAT
58,10 €excl. VAT
RAM® Twist-Lock™ suction cup mount for Apple iPhone Xs Max, 7 & 6 Plus
The RAM-B-166-AP19U consists of a 3.3" Twist-Lock suction cup base, double socket arm and high-strength composite cradle. The Twist-Lock suction cup base is designed to grip strongly on glass and non-porous plastic surfaces. A patented 1" diameter rubber ball-and-socket system is integrated into the mount, with adjustment points at both ends of the socket arm; with a turn of the arm knob you can move the mount to your optimal viewing position.
71,09 €*incl. VAT
58,75 €excl. VAT
RAM® Twist-Lock™ suction cup mount for Apple MagSafe (2020)
The RAM® Twist-Lock™ suction cup mount for Apple MagSafe® Charger (2020) (RAM-B-166-AP-MAGU) is designed to integrate the official Apple MagSafe® Charger (2020) into RAM® ball-and-socket mounting systems, providing a secure, reliable in-vehicle mounting solution. This adapter provides a tight, precise fit for the original Apple MagSafe® charging puck, allowing compatible iPhone models to snap magnetically into place when correctly aligned. This set includes the RAM® Twist-Lock™ B-size suction cup base with B-size medium-length socket arm, perfect for mounting on your vehicle's windshield. This product is compatible with the original Apple MagSafe® Charger released in 2020. It is not compatible with the newer Apple MagSafe® Charger released in 2024 and later. Not sure which MagSafe® charger you have? If your charger cable is braided, it is a newer MagSafe® Charger from 2024+. If the cable is smooth with a soft rubber housing, it is the original MagSafe® Charger from 2020.
61,61 €*incl. VAT
50,92 €excl. VAT
RAM® Twist-Lock™ suction cup mount for Apple MagSafe (2024+)
The RAM® Twist-Lock™ suction cup mount for Apple MagSafe® Charger (2024+) (RAM-B-166-AP-MAG-1U) is designed to integrate the official Apple MagSafe® Charger (2024+) into RAM® ball-and-socket mounting systems, providing a secure, reliable in-vehicle mounting solution. This adapter provides a snug, precise fit for the newer Apple MagSafe® charging puck, allowing compatible iPhone models to click magnetically into place when correctly aligned. This mounting kit includes a RAM® Twist-Lock™ B-size suction cup base with a medium-length B-size socket arm, perfect for mounting on your vehicle's windscreen. This product is compatible with the newer Apple MagSafe® Charger released in 2024 and later. It is not compatible with the original 2020 MagSafe® charging puck. Not sure which MagSafe® charger you have? If your charging cable is braided, it is a newer 2024+ MagSafe® Charger. If the cable is smooth with a soft rubber housing, it is the original 2020 MagSafe® Charger.
71,09 €*incl. VAT
58,75 €excl. VAT
RAM® Twist-Lock™ suction cup mount with spring-loaded phone holder
The RAM-B-166-UN5U consists of a B-size medium-length arm, our 2.5" Twist-Lock suction cup base and universal holder for large phones.
118,96 €*incl. VAT
98,31 €excl. VAT
RAM® Twist-Lock™ suction cup mount with universal spring-loaded holder
The RAM® Twist-Lock™ suction cup mount with universal spring-loaded holder (art. RAP-B-104-224-PD2U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The suction cup mount attaches with a strong suction cup to a smooth surface such as a window or dashboard and connects to a holder via the RAM® ball-and-socket system. This lets you mount a device quickly and without drilling.Attachment without drilling on a smooth surfacePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.
106,52 €*incl. VAT
88,03 €excl. VAT
RAM® universal phone holder with diamond base
The RAM® universal phone holder with diamond base (art. RAM-B-102-UN1U) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The holder clamps a phone or tablet firmly in place and keeps the screen readable and operable during work, with the ruggedness that characterises RAM® Mounts.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-102-UN1UOriginal RAM® Mounts part.
118,37 €*incl. VAT
97,83 €excl. VAT