Telefoonhouders
203 products found
RAM® USB-C powered dock & dashboard mount set for Zebra EM45
The RAM® USB-C powered dock & dashboard mount set for Zebra EM45 (RAM-B-101-225B2-ZE38-V3CU) is a complete set with everything needed to deploy the Zebra EM45 in your fleet. It includes one RAM® powered vehicle dock and a double ball mount with mounting plate. The dock uses a USB Type-C female power connector and supplies power to the device via a direct USB-C connection tested for more than 250,000 cycles. The spring-loaded design of this dock allows quick one-handed insertion or removal of your device, while the precise design of the dock housing minimises human error and damage to the port when docking the device onto the USB-C male connector. The RAM® vehicle dock comes with a 3-year warranty.
619,05 €*incl. VAT
511,61 €excl. VAT
RAM® X-Grip® composite phone holder with Diamond base
The RAP-B-102-UN7U consists of a composite diamond base, double socket arm and universal spring-loaded X-Grip® holder for mobile phones. The mount is designed with a unique rubber ball-and-socket system with a diameter of 1" with adjustment points at both ends of the socket arm; with a turn of the arm knob you move the X-Grip® holder to your optimal viewing position. The 2.43" x 1.31" diamond base has two holes 1.912" centre to centre and matches the industry-standard AMPS hole pattern. The included X-Grip® holder has a sleek and smart four-leg design with great holding power without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect custom fit of your mobile phone. The perfect complement to the modern, sleek interior of today's vehicles; the RAM X-Grip® is the evolved phone holder. The X-Grip® includes a device tether that is recommended for outdoor applications. The X-Grip® holder is compatible with handheld devices that fit within the dimensions below. It's important to check the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
89,41 €*incl. VAT
73,89 €excl. VAT
RAM® X-Grip® double U-bolt mount
The RAM-101U-235-UN7 consists of a double U-bolt base, a 6-inch double socket arm and a universal X-Grip® holder. This package contains hardware suitable for rails from 1" to 1.25" in diameter. The base includes black cover caps that fit over the exposed ends of the U-bolt. The mount is designed with a patented RAM rubber ball-and-socket system with a 1.5" diameter, with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles. The included X-Grip® holder has a sleek and smart four-legged design that provides a strong grip without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, giving your mobile phone a perfect custom fit. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder.
158,61 €*incl. VAT
131,08 €excl. VAT
RAM® X-Grip® high-strength composite phone holder with drill-down base
The RAP-B-138-UN7U consists of a round 2.5" diameter base with the universal AMPS hole pattern, medium-length composite double socket arm and the popular spring-loaded RAM® X-Grip® phone holder. The RAM® X-Grip® has an 'X' design that expands and contracts for a perfect fit of your device – even with a case. Made of marine-grade stainless steel components and high-strength composite, this version of the RAM® X-Grip® fits phones from 1.87" to 3.25" wide and keeps your device fully functional and accessible. The RAM® ball-and-socket technology provides nearly infinite adjustability for the ideal viewing angle – while also extending the life of your phone by dampening shocks and vibrations. For outdoor use, the RAM® X-Grip® includes a device tether that is recommended for extra safety and peace of mind.
82,40 €*incl. VAT
68,10 €excl. VAT
RAM® X-Grip® holder for large phones with brake/clutch reservoir base – medium
The RAM-B-174-UN10 consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", double socket arm and universal X-Grip® holder for large phones/phablets. Integrated in the holder is a patented system with 1" diameter rubber ball and socket, with adjustment points at both ends of the socket arm; with a twist of the arm knob you can move the X-Grip® holder to your optimal viewing position. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. The supplied X-Grip® holder has a sleek and smart four-leg design with a strong grip, without hiding your phone behind foam rubber pads and plastic. The spring-loaded X-Grip® holder expands and contracts, giving your mobile phone a perfect custom fit. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The X-Grip® comes with a device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
141,82 €*incl. VAT
117,21 €excl. VAT
RAM® X-Grip® holder for large phones with brake/clutch reservoir base – short
The RAM-B-174-A-UN10U consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", a short-length double socket arm and universal X-Grip® holder for mobile phones. Integrated into the holder is a patented system with a 1" diameter rubber ball and socket, with adjustment points at both ends of the socket arm; with a turn of the arm knob you can move the X-Grip® holder to your optimal viewing position. The hardware for brake/clutch reservoirs includes both standard and metric mounting bolts. The supplied X-Grip® holder has a sleek and clever four-legged design with a strong grip, without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, giving your mobile phone a perfect custom fit. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The supplied X-Grip® holder has a sleek and clever four-legged design with a strong grip, without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, giving your mobile phone a perfect custom fit. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The X-Grip® comes with a device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
125,97 €*incl. VAT
104,11 €excl. VAT
RAM® X-Grip® holder for large phones with flexible adhesive base
The RAP-B-378-UN10U consists of the flexible adhesive base with 1" ball, dual socket arm and universal X-Grip® holder. With a PSA adhesive pad, you can place the flexible adhesive mount virtually anywhere you want to keep your portable electronics clearly visible and always within reach. Thanks to its very small footprint, it easily finds a place on your scooter, motorcycle, kayak, boat or dashboard. The mount features a patented RAM® 1" diameter rubber ball-and-socket system, with adjustment points at both ends of the dual socket arm; this provides virtually infinite adjustability and perfect viewing angles. The included X-Grip® holder has a sleek and clever four-legged design that provides excellent holding power without hiding your phone behind foam rubber and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your phone. As the perfect complement to the modern, sleek interior of today’s vehicles, the RAM® X-Grip® is the evolved phone holder. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
104,23 €*incl. VAT
86,14 €excl. VAT
RAM® X-Grip® holder for large phones with grab handle & A-style M6 bolt base
The RAM® X-Grip® holder for large phones with grab handle & A-style M6 bolt base (RAM-B-186-M6-UN10U) is easy to install on any vehicle grab handle with an M6 threaded bolt. This solution includes a medium double socket arm, the popular spring-loaded RAM® X-Grip® holder for large phones and RAM® ball base. With a hollow core, you can pass the 6mm bolt or smaller through to screw into your vehicle grab handle for a stable mounting base without drilling. Keep your windshield clear and your phone holder out of the way with this grab-handle mount for phones, GPS devices and more! Confirmed fit for this product includes the Toyota Tundra and all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage and Raptor—however, any vehicle that uses a 6mm bolt or smaller in its structure is compatible with this product. A smaller bolt can be used, although the load capacity decreases with the bolt size.
109,71 €*incl. VAT
90,67 €excl. VAT
RAM® X-Grip® holder for large phones with handlebar U-bolt base – short
The RAM-B-149Z-A-UN10U consists of a zinc-coated U-bolt base, short double socket arm and universal spring-loaded X-Grip IV holder for large phones and phablets. This package includes mounting hardware suitable for rails with a diameter of 0.50" to 1.25". The base includes black end caps for the exposed ends of the U-bolt. The supplied composite rail adapter can narrow the rail to a minimum width of 0.5". The holder is equipped with a RAM B-size patented rubber ball-and-socket system of 1" diameter with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. The spring-loaded X-Grip IV holder expands and contracts for a perfect fit of your phone or phablet. The X-Grip® comes with a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions below. It is important to check the dimensions of your device with case/sleeve/skin when determining the overall size.
113,58 €*incl. VAT
93,87 €excl. VAT
RAM® X-Grip® holder for large phones with large fuel tank base
The RAM fuel tank base is a compact way to get a unique perspective with your camera or to mount your electronic device in a quickly accessible spot. This powder-coated aluminium base mounts directly onto the original fuel tank of the listed compatible motorcycles. The mounting hardware required to mount to the filler opening is also included. The X-Grip for large phones is included. The X-Grip® comes with a safety tether for the device, recommended for outdoor use. The holder is compatible with mobile devices that fit within the dimensions below. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.
153,89 €*incl. VAT
127,18 €excl. VAT
RAM® X-Grip® holder for large phones with low-profile small Tough-Claw™
The RAM® X-Grip® holder for large phones with low-profile RAM® Tough-Claw™ (RAM-HOL-UN10-400-2U) consists of the small RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® has an 'X' design that expands and contracts to secure your phone and includes a device tether that is recommended for outdoor applications. With the RAM® Tough-Claw™ base attached, you can easily mount the RAM® X-Grip® to round, square and irregularly shaped rails and bars with an outside diameter of .625" to 1.14". This set is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device with case, sleeve or skin when determining the overall size.
105,77 €*incl. VAT
87,41 €excl. VAT
RAM® X-Grip® holder for large phones with low-profile suction cup base
The RAP-B-166-2-UN10 consists of a 2.75" Twist-Lock™ suction cup base, dual socket system and universal spring-loaded X-Grip® holder for large phones. The Twist-Lock™ suction cup base is designed to attach firmly to glass and non-porous plastic surfaces, including adhesive discs. The holder features a patented RAM® 1" diameter rubber ball-and-socket system, with adjustment points at both ends of the dual socket arm; this provides virtually infinite adjustability and perfect viewing angles. The included X-Grip® holder has a sleek and clever four-legged design that provides excellent holding power without hiding your phone behind foam rubber and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your phone. As the perfect complement to the modern, sleek interior of today’s vehicles, the RAM® X-Grip® is the evolved phone holder. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
96,07 €*incl. VAT
79,40 €excl. VAT
RAM® X-Grip® holder for large phones with low-profile zip-tie handlebar base
The RAP-460Z-UN10U consists of a double strap base with RAM® Pin-Lock™ backing plate and the popular spring-loaded RAM® X-Grip® phone holder, with an 'X' design that expands and contracts for a perfect fit of your device – even with a case. Made of high-strength composite and stainless steel, the RAM® X-Grip® phone holder is compatible with a wide range of RAM® double socket arms and mounting bases. This version of the RAM® X-Grip® fits phones from 1.75" to 4.5" wide and keeps your device fully functional and accessible. Adjust the zip ties for attachment to various rails, from a minimum diameter of .5". For outdoor use – such as a phone holder on a bike – the RAM® X-Grip® includes a device tether that is recommended for extra safety and peace of mind.
67,17 €*incl. VAT
55,51 €excl. VAT
RAM® X-Grip® holder for large phones with motorcycle bar-end base
Designed to fit into the cylindrical bore wall of bar ends with a diameter of 12mm to 38mm (.5" to 1.49"), the RAM-B-176-A-UN10U consists of a bar-end base, short-length double socket arm and the popular spring-loaded RAM® X-Grip® holder for large phones. The RAM® X-Grip® has an 'X' design that expands and contracts for a perfect fit of your device – even in a case. Made of high-strength composite and stainless steel, this version of the RAM® X-Grip® fits phones with a width of 1.75" to 4.5" and keeps your device fully functional and accessible. RAM® ball-and-socket technology allows virtually infinite adjustability to achieve the ideal viewing angle – while also extending the lifespan of your phone by absorbing shocks and vibrations. For outdoor applications the RAM® X-Grip® comes with a device tether that is recommended for extra safety and peace of mind.
118,94 €*incl. VAT
98,30 €excl. VAT
RAM® X-Grip® holder for large phones with motorcycle handlebar clamp base
The RAM-B-367-UN10U consists of a motorcycle handlebar clamp base with M8 thread, a double socket arm and a universal X-Grip® holder. This holder replaces one of the M8 bolt heads of your handlebar clamp system and positions your device neatly in the centre. The holder features a patented RAM ball-and-socket system with a B-size 1" diameter rubber ball with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles. The spring-loaded X-Grip® IV holder folds out and in, for a perfect fit of your phone or phablet. The X-Grip® comes with a device tether recommended for outdoor use. The holder is compatible with mobile devices that fit within the dimensions below. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.
109,94 €*incl. VAT
90,86 €excl. VAT
RAM® X-Grip® holder for large phones with RAM-A-CAN™ II cup holder base
The RAP-299-3-UN10U consists of the RAM-A-CAN™ cup holder base, double socket system and universal spring-loaded X-Grip® holder for large phones and phablets. Included are support fins that flex, allowing the cup holder base to conform to most vehicle cup holders. The holder is designed with a patented RAM B-size rubber ball-and-socket system of 1" diameter with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustability and perfect viewing angles. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your phone or phablet. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
141,21 €*incl. VAT
116,70 €excl. VAT
RAM® X-Grip® holder for large phones with RAM® EZ-On/Off™ bike base
Wherever your adventure takes you, chances are your smartphone is within reach. For the outdoor cycling enthusiast, the RAM universal bike mount is the most complete mounting solution to attach a smartphone to your bike. Compatible with virtually any smartphone, the X-Grip® holder has a sleek and smart four-leg design that provides an excellent grip, but also allows easy placement or removal of your phone. Designed to fit most common handlebar sizes, the included base uses ordinary cable ties to attach to various handlebar diameters. Made from high-strength composite, it is also lightweight. Adjustable for the best viewing angle, this product is perfect for every cyclist or open-trail adventurer. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
81,28 €*incl. VAT
67,17 €excl. VAT
RAM® X-Grip® holder for large phones with RAM® Pod™ I vehicle mount
The RAM-B-316-1-UN10U consists of the RAM POD No-Drill™ vehicle base, an 18" rigid aluminium rod, the socket system and a universal spring-loaded X-Grip® holder for large phones and phablets. The base of the holder attaches to your seat rail without drilling. The 18" rigid aluminium rod can be bent to place your device in the optimal viewing position. The spring-loaded X-Grip® holder folds out and in, for a perfect fit of your phone or phablet. The X-Grip® comes with a device tether recommended for outdoor use. The holder is compatible with mobile devices that fit within the dimensions below. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.
170,45 €*incl. VAT
140,87 €excl. VAT
RAM® X-Grip® holder for large phones with RAM® Snap-Link™ Tough-Claw™
The RAM® Tough-Claw™ is the perfect mounting base for tool-free installation and removal on round, square and irregularly shaped rails and bars. The small version of the RAM® Tough-Claw™ can quickly clamp onto rails with an outer diameter of .625" to 1.14" and is ideal for mounting on an aircraft yoke, the handlebars of bicycles and motorcycles, or even on kayak rails and roll bars. This set includes the popular spring-loaded RAM® X-Grip® phone holder with an 'X' design that expands and contracts for a perfect fit for your device – even when it is in a case. This large version of the RAM® X-Grip® fits phones with a width of 1.75" to 4.5" and keeps your device fully functional and accessible. For outdoor applications, the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.
112,68 €*incl. VAT
93,12 €excl. VAT
RAM® X-Grip® holder for large phones with RAM® Tough-Ball™ M6-1 x 6mm base
The RAM® X-Grip® holder for large phones with RAM® Tough-Ball™ M6-1 x 6mm base is a universal holder for larger smartphones.The X-Grip clamps around larger devices with spring arms and holds them firmly in place, while the Tough-Ball M6 base offers flexible placement. Ideal for mounting a large phone within easy reach in vehicles and material handling.X-Grip® holder for large phonesWith Tough-Ball™ M6-1 x 6mm baseFor vehicles and material handlingOriginal RAM Mounts part.
100,33 €*incl. VAT
82,92 €excl. VAT
RAM® X-Grip® holder for large phones with RAM® Twist-Lock™ base and 18" pole
The RAP-224-18-A-UN10 consists of the Twist-Lock™ suction cup, an 18" PVC tube and short double socket arm connected to the universal X-Grip® holder for large phones. Ideal for mounting on a SUP board, this holder provides the perfect elevation for comfortable viewing and operating of your phone while you are on the water. The X-Grip® features a device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
153,95 €*incl. VAT
127,23 €excl. VAT
RAM® X-Grip® holder for large phones with screw-down base
The RAM-B-138-UN10 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal spring-loaded X-Grip® holder for mobile phones. The mount incorporates a patented rubber ball-and-socket system with a 1" diameter ball, with adjustment points at both ends of the socket arm; a twist of the arm knob moves the holder to your optimal viewing position. The included X-Grip® holder has a sleek and smart four-legged design that provides a strong grip without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your mobile phone. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved mobile phone holder. The X-Grip® comes with a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions below. It is important to check the dimensions of your device with case/sleeve/skin when determining the overall size.
109,41 €*incl. VAT
90,42 €excl. VAT
RAM® X-Grip® holder for large phones with small fuel tank base
The RAM fuel tank base is a compact way to get a unique perspective with your camera or to mount your electronic device in a quickly accessible spot. This powder-coated aluminium base mounts directly onto the original fuel tank of the listed compatible motorcycles. The mounting hardware required to mount to the filler opening is also included. The X-Grip for large phones is included. The X-Grip® comes with a safety tether for the device, recommended for outdoor use. The holder is compatible with mobile devices that fit within the dimensions below. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.
145,36 €*incl. VAT
120,13 €excl. VAT
RAM® X-Grip® holder for large phones with Torque™ large rail base - medium arm
Take your mobile entertainment on the go with the new RAM® Torque™ handlebar and rail mount base. We have combined a 1" B-size rubber ball base suitable for bars of 1 1/8" to 1 ½" diameter with a standard-length B-size arm and the dynamic X-Grip® for larger phones. Size inserts are included for a tight fit and added protection of the rail. The mount uses nylon-insert lock nuts to prevent loosening in high-vibration environments. This compact mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The included X-Grip® holder features a sleek, smart four-arm design that provides a strong grip without hiding your phone behind foam rubber and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your mobile phone. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved form of the phone holder. The X-Grip® comes with a device tether cord, recommended for outdoor use. The holder is compatible with mobile devices that fit within the dimensions listed below. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.
128,51 €*incl. VAT
106,21 €excl. VAT