Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Universele houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

471 products found

RAM® Double Ball Mount with Two Marine Electronics Plates

RAM® Double Ball Mount with Two Marine Electronics Plates

The RAM-133A mount consists of the ball-and-socket system with a diameter of 1.5 inch with universal rectangular base ends of 6.25 x 2 inch. The bases have many different combinations of pre-drilled holes that match many electronic devices and mounts, including marine GPS, CB radios, amateur radios and gimbal brackets.

116,92 €*incl. VAT

96,63 €excl. VAT

Více informací

RAM® double ball mount with Unified barcode hardware

RAM® double ball mount with Unified barcode hardware

The RAM-101-UNF1 consists of a double socket arm and two round bases with a 2.5" diameter featuring the universal AMPS hole pattern, as well as the hardware needed to attach a Unified barcode scanner to one side of the mount.

134,58 €*incl. VAT

111,22 €excl. VAT

Více informací

RAM® double ball screw-down mount with diamond plate – long

RAM® double ball screw-down mount with diamond plate – long

The RAM-B-138U-C consists of a 2.5" diameter round base with the universal AMPS hole pattern, a LONG double socket arm and a diamond base adapter. The mount is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. The hole pattern on the diamond base adapter fits most RAM mounts. The included patented RAM design dampens shocks and vibrations, helping to extend the service life of your device.

68,61 €*incl. VAT

56,70 €excl. VAT

Více informací

RAM® double ball screw-down mount with diamond plate – short

RAM® double ball screw-down mount with diamond plate – short

The RAM-B-138U-A consists of a 2.5" diameter round base with the universal AMPS hole pattern, a SHORT double socket arm and a diamond base adapter. The mount is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. The hole pattern on the diamond base adapter fits most RAM mounts. The included patented RAM design dampens shocks and vibrations, helping to extend the service life of your device.

50,98 €*incl. VAT

42,13 €excl. VAT

Více informací

RAM® double ball screw-down mount with rectangular AMPS plate – long

RAM® double ball screw-down mount with rectangular AMPS plate – long

The RAM-B-139U-A consists of a medium length B size double socket arm, one 2.5" round plate and one 2" x 1.7" plate with the universal AMPS hole pattern. The mount is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. The AMPS hole pattern on each plate fits many RAM® mounts, including all iPad holders. The included patented RAM® design dampens shocks and vibrations, helping to extend the service life of your device.

70,12 €*incl. VAT

57,95 €excl. VAT

Více informací

RAM® double ball screw-down mount with rectangular AMPS plate – short

RAM® double ball screw-down mount with rectangular AMPS plate – short

The RAM-B-139U-A consists of a short length B size double socket arm, one 2.5" round plate and one 2" x 1.7" plate with the universal AMPS hole pattern. The mount is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. The AMPS hole pattern on each plate fits many RAM® mounts, including all iPad holders. The included patented RAM® design dampens shocks and vibrations, helping to extend the service life of your device.

51,78 €*incl. VAT

42,79 €excl. VAT

Více informací

RAM® double ball screw-down mount with rectangular AMPS plates – medium

RAM® double ball screw-down mount with rectangular AMPS plates – medium

The RAM® double ball screw-down mount with rectangular AMPS plates – medium (art. RAM-B-141U) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The part is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-141UOriginal RAM® Mounts part.

54,41 €*incl. VAT

44,97 €excl. VAT

Více informací

RAM® double ball screw-down mount with rectangular AMPS plates – short

RAM® double ball screw-down mount with rectangular AMPS plates – short

The RAM® double ball screw-down mount with rectangular AMPS plates – short (art. RAM-B-141U-A) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The part is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-141U-AOriginal RAM® Mounts part.

51,50 €*incl. VAT

42,56 €excl. VAT

Více informací

RAM® double ball screw-in holder with rectangular AMPS plate & hardware

RAM® double ball screw-in holder with rectangular AMPS plate & hardware

The RAM-139U-AU consists of a medium-length B-size double socket arm, one round 2.5" plate and one 2" x 1.7" plate with the universal AMPS hole pattern and a set of #10-32 x 5/8" machine screws and nuts. The holder features the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. The AMPS hole pattern on each plate fits many RAM® holders, including all iPad holders. The included patented RAM® design dampens shocks and vibrations, helping to extend the lifespan of your device.

61,38 €*incl. VAT

50,73 €excl. VAT

Více informací

RAM® double ball strap clamp mount with diamond plate - long

RAM® double ball strap clamp mount with diamond plate - long

The RAM-B-108-C-238 consists of a long B size arm with a 2.43" x 1.31" diamond base with 2-hole AMPS pattern and a strap clamp base for rails between 1" and 2.1" diameter.

94,95 €*incl. VAT

78,47 €excl. VAT

Více informací

RAM® double ball strap clamp mount with diamond plate - medium

RAM® double ball strap clamp mount with diamond plate - medium

The RAM-B-108U-GP1 consists of a medium length B size arm with a 2.41" x 1.31" diamond plate with 2-hole AMPS pattern on one end and a strap clamp base for rails between 1" and 2.1" diameter on the other.

72,03 €*incl. VAT

59,53 €excl. VAT

Více informací

RAM® double ball strap clamp mount with diamond plate - short

RAM® double ball strap clamp mount with diamond plate - short

The RAM-B-108-A-238 consists of a short B size arm with a 2.43" x 1.31" diamond base with 2-hole AMPS pattern and a strap clamp base for rails between 1" and 2.1" diameter.

72,95 €*incl. VAT

60,29 €excl. VAT

Více informací

RAM® double ball strap clamp mount with round plate - long

RAM® double ball strap clamp mount with round plate - long

The RAM-B-108-C consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base, a LONG double socket arm and a 2.5" base with the universal AMPS hole pattern. The mount is designed with a patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

96,96 €*incl. VAT

80,13 €excl. VAT

Více informací

RAM® double ball strap clamp mount with round plate - medium

RAM® double ball strap clamp mount with round plate - medium

The RAM-B-108U consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base, a double socket arm and a 2.5" base with the universal AMPS hole pattern. The mount is designed with a patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

74,15 €*incl. VAT

61,28 €excl. VAT

Více informací

RAM® double ball strap clamp set 1" - 3" with AMPS plate - medium

RAM® double ball strap clamp set 1" - 3" with AMPS plate - medium

The RAM-B-108-40U consists of a medium length B size arm with a rectangular plate with universal AMPS hole pattern and a strap clamp base suitable for rails from 1" to 3" diameter.

79,04 €*incl. VAT

65,32 €excl. VAT

Více informací

RAM® double ball strap clamp set 2" - 3" with AMPS plate - long

RAM® double ball strap clamp set 2" - 3" with AMPS plate - long

The RAM-B-108-C-STRAP40 consists of a long B size arm with a 2.5" diameter round plate with AMPS hole pattern and a strap clamp base for rails between 2" and 3" diameter.

94,37 €*incl. VAT

77,99 €excl. VAT

Více informací

RAM® double ball strap clamp set 2" - 3" with AMPS plate - short

RAM® double ball strap clamp set 2" - 3" with AMPS plate - short

The RAM-B-108-A-STRAP40 consists of a short B size arm with a 2.5" diameter round plate with AMPS hole pattern and a strap clamp base for rails between 2" and 3" diameter.

73,58 €*incl. VAT

60,81 €excl. VAT

Více informací

RAM® double ball strap clamp set 2" - 3" with diamond plate - long

RAM® double ball strap clamp set 2" - 3" with diamond plate - long

The RAM-B-108-C-STRAP40-238 consists of a long B size arm with a 2.43" x 1.31" diamond base with 2-hole AMPS pattern and a strap clamp base for rails between 2" and 3" diameter.

92,38 €*incl. VAT

76,35 €excl. VAT

Více informací

RAM® double ball strap clamp set 2" - 3" with diamond plate - short

RAM® double ball strap clamp set 2" - 3" with diamond plate - short

The RAM-B-108-A-STRAP40-238 consists of a short B size arm with a 2.43" x 1.31" diamond base with 2-hole AMPS pattern and a strap clamp base for rails between 1" and 2.1" diameter.

71,41 €*incl. VAT

59,02 €excl. VAT

Více informací

RAM® double ball through-bolt holder with diamond plate & mounting plate

RAM® double ball through-bolt holder with diamond plate & mounting plate

The RAM-B-138U-C-INT3 consists of a round base of 2.5" diameter featuring the universal AMPS hole pattern, a long double socket arm, a diamond base adapter and a mounting plate. The holder is designed with a patented rubber ball and socket system of 1" diameter with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustability and perfect viewing angles. The hole pattern on the diamond base adapter fits most RAM holders. The included patented RAM design dampens shocks and vibrations, helping to extend the life of your device.

92,35 €*incl. VAT

76,32 €excl. VAT

Více informací

RAM® double ball U-bolt mount with round plate

RAM® double ball U-bolt mount with round plate

The RAM-101U-IP1 consists of a zinc-plated U-bolt base, a double socket arm and a round base with a 2.5" diameter featuring the universal AMPS hole pattern. This package includes hardware suitable for rails from 0.50" to 1.25" in diameter. The base includes black cover caps that are placed over the exposed ends of the U-bolt. The supplied composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a patented RAM rubber ball-and-socket system with a 1.5" diameter, with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles.

100,79 €*incl. VAT

83,30 €excl. VAT

Více informací

RAM® double ball yoke clamp mount with angled extension plate – medium

RAM® double ball yoke clamp mount with angled extension plate – medium

The RAM-B-125U consists of a yoke clamp base, a standard-length double socket arm and an angled extension plate with the universal AMPS hole pattern. The yoke clamp base fits rails from 0.625" up to 1.25" in diameter. The 1" rubber ball sits perpendicular to the face of the mount; when attached to a rail the ball sits parallel to the rail. Originally designed to position your GPS in front of the yoke in your aircraft, the angled extension plate can also be used for many other applications. The mounting part of the plate is 2.5" square, with pre-drilled holes for numerous screw hole patterns, including the universal AMPS hole pattern and all RAM-made cradles. The connecting part protrudes about 2.25" forward, at a 45-degree angle, from the centre of the 1" ball and about 1.5" above the 1" ball (to the bottom of the connecting part of the plate). The mount is fitted with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

97,34 €*incl. VAT

80,45 €excl. VAT

Více informací

RAM® double ball yoke clamp mount with angled extension plate – short

RAM® double ball yoke clamp mount with angled extension plate – short

The RAM-B-125U-A consists of a yoke clamp base, a SHORT double socket arm and an angled extension plate with the universal AMPS hole pattern. The yoke clamp base fits rails from 0.625" up to 1.25" in diameter. The 1" rubber ball sits perpendicular to the face of the mount; when attached to a rail the ball sits parallel to the rail. Originally designed to position your GPS in front of the yoke in your aircraft, the angled extension plate can also be used for many other applications. The mounting part of the plate is 2.5" square, with pre-drilled holes for numerous screw hole patterns, including the universal AMPS hole pattern and all RAM-made cradles. The connecting part protrudes about 2.25" forward, at a 45-degree angle, from the centre of the 1" ball and about 1.5" above the 1" ball (to the bottom of the connecting part of the plate). The mount is fitted with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

94,30 €*incl. VAT

77,93 €excl. VAT

Více informací

RAM® double ball yoke clamp mount with diamond plate - long

RAM® double ball yoke clamp mount with diamond plate - long

The RAM-B-121-C-238U consists of a yoke clamp base, a LONG double socket arm and a 2.43" x 1.31" diamond base. The yoke clamp base fits rails from 0.625" up to a maximum of 1.25" diameter. The 1" rubber ball sits at a right angle to the plane of the mount; when connected to a rail the ball is parallel to the rail. The diamond base has two holes 1.912" on center, matches the industry standard AMPS hole pattern and fits a large number of RAM Mount holders and third-party holders. The mount is designed with a patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

101,99 €*incl. VAT

84,29 €excl. VAT

Více informací