Chemical products

The Novatio Plastic paint roller tray (15 x 32 cm) is a paint tray for use with Novatio paint and paint rollers.In this tray you pour the paint and roll off excess product, for an even pick-up on the roller. Practical application accessory for a neat painting and coating result.Plastic paint tray, 15 x 32 cmFor use with paint rollerProfessional Novatio accessory

ECONOMICAL DISPENSER FOR LIQUIDSThe Plunger Dispenser 2L is a must-have for every workstation. It provides fast dosing of solvent cleaners onto a cloth, without spilling. The construction ensures that excess product flows back into the container, which prevents unnecessary evaporation. The flame grille in the dispenser basin prevents possible flashback to the container. AdvantagesCorrect dosing of cleaners Fire-safe No risk of spilling Use Fill the container with a maximum of 2 litres of product and screw the dispenser into place. Use a paper or microfibre cloth. Press the dispenser bowl down 1-2 x. The cloth absorbs the correct amount of cleaner/degreaser.

ECONOMICAL DISPENSER FOR LIQUIDSThe Plunger Dispenser 2L is a must-have for every workstation. It provides fast dosing of solvent cleaners onto a cloth, without spilling. The construction ensures that excess product flows back into the container, which prevents unnecessary evaporation. The flame grille in the dispenser basin prevents possible flashback to the container. AdvantagesCorrect dosing of cleaners Fire-safe No risk of spilling Use Fill the container with a maximum of 2 litres of product and screw the dispenser into place. Use a paper or microfibre cloth. Press the dispenser bowl down 1-2 x. The cloth absorbs the correct amount of cleaner/degreaser.

The Novatio Pneumatic Gun 1K is a pneumatic application gun for one-component (1K) Novatio products.Using compressed air, you apply adhesive, sealant or sealing compound evenly and without fatigue. Ideal for larger or repetitive jobs where constant pressure and smooth application are required.Pneumatic gun for 1K productsCompressed-air driven for constant dosingProfessional Novatio tool

PNEUMATIC GUN 2x200ml

The Novatio Pouring Can 1L is a 1-litre pouring aid for the controlled transfer and dosing of Novatio liquids.With this can you neatly transfer products into smaller packaging or application devices, without spilling. A practical accessory for the workshop and maintenance.1-litre pouring canFor controlled transfer and dosingProfessional Novatio accessory

POWERFUL UNIVERSAL SOLVENTDissolves both water- and solvent-borne products and is universally applicable. Powersolv is free of harmful or chlorinated solvents. Powersolv can be used both manually and in a dip or rinse bath. Replaces traditional solvents in closed rinsing systems.BenefitsSafe removal of both water- and solvent-borne products. Removes most types of contamination: grease, tar, paint (including 2-component or water-based paints), adhesives, felt-tip pen, printing ink, ... . Can be neutralised with water.Use Apply and leave to act according to the application Remove the contamination Post-treat with Novatio Aquasolv, Novakleen or Multifoam Use in a well-ventilated area or wear a suitable filter mask. Test the colour fastness and resistance of plastics and delicate surfaces in an inconspicuous spot. If necessary, apply Powersolv to a cloth instead of directly to the surface.Technical specifications Composition: alcohol, esters and glycols. Appearance: liquid. Colour: colourless. Odour: characteristic odour. Vapour pressure at 20°C (hPa): 43. Flash point: 11°C. Relative density: 0,88. Auto-ignition temperature: 230°C. Solubility: water, moderately soluble. Do not use POWERSOLV on paints or varnishes that are not fully cured. Always test on painted or varnished surfaces !! Always test the surface first for colour fastness. Shelf life: 60 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

PIGMENT FOR COLOURING POXYCON

PIGMENT FOR COLOURING POXYCON

PIGMENT FOR COLOURING POXYCON

PIGMENT FOR COLOURING POXYCON

THINNER AND CLEANING AGENT FOR EPOXY RESINSFor cleaning tools and removing not yet cured epoxy resins.AdvantagesThinner for epoxy. Ideal tool cleaner after bonding and filling work. Colourless.Technical specifications Composition: combination of esters and hydrocarbon. Specific weight at 20°C: ± 0,87 g/cm³. Flash point: ±48°C. Odour: aromatic. Unlimited shelf life in original packaging.

Contents: - 1 x 2kg Poxycon (637219000) - 2 x 1,5kg PQZ-220 Poxy Quarz Leveling Sand Fine (623011390) - 1 x 5ml PAS-460 Poxy Anti Silicone (623035390) - 1 x Poxy manual

Contents: - 1 x 2kg Poxycon (637219000) - 1 x 1kg PQZ-230 Poxy Quarz Lining Sand (623029000) - 1 x 5ml PAS-460 Poxy Anti Silicone (623035390) - 1 x Poxy manual

FILLER FOR EPOXY RESIN MORTARAdvantagesFor the composition of synthetic resin mortars, in combination with Poxycon.UseLiquid-tight Poxycon mortar First apply a base layer of Poxycon. Then add Poxy Quartz to the well-mixed Poxycon in the bucket provided. Mixing ratio by weight: 1 part Poxycon and 5 parts Poxy Quartz. Process immediately. Consumption per mm layer thickness on 1 m²: approx. 0,4 kg Poxycon and 2,0 kg Poxy Quartz. Open-pore Poxycon mortar First apply a base layer of Poxycon. Then add Poxy Quartz to the well-mixed Poxycon in the bucket provided. Mixing ratio by weight: 1 part Poxycon and 10 parts Poxy Quartz. Process immediately. Consumption per mm layer thickness on 1 m²: approx. 0,2 kg Poxycon and 2,0 kg Poxy Quartz.Technical specifications Composition: washed and fire-dried quartz. Colour: white-grey. Density: 2,65. Grain size: ± 0,2 - 2,0 mm. Shelf life: unlimited when stored dry.

Contents: - 1 x 2kg Poxycon (637219000) - 1 x 1,5kg PQZ-220 Poxy Quarz Leveling Sand Fine (623011390) - 1 x 5ml PAS-460 Poxy Anti Silicone (623035390) - 1 x Poxy manual

2K EPOXY WEAR LAYER AND REPAIR FOR SCREEDS AND FLOORSTransparent, liquid 2-component epoxy resin for impregnating, reinforcing, priming, levelling, repairing, casting, making containment basins liquid-tight, … . By adding Poxy Quartz, epoxy mortar is obtained.AdvantagesPressure-resistant, wear-resistant and weather-resistant. Exceeds the cohesion of concrete. Mechanically and chemically loadable.UseSubstrate Apply to a load-bearing, stable and clean substrate, free from loose parts, dust, oil, grease, rubber marks, … . Mixing Remove the separating strip from the bag and mix the two components in the bag for 1 minute by kneading intensively. Process immediately. Processing time At 20°C and 60% R.H. approximately 25 minutes. Higher temperatures shorten and lower temperatures extend the working time (pot life). Applying Depending on the application with a rubber floor squeegee, a toothed rubber floor squeegee, a toothed trowel, an epoxy roller, … . Waiting times Before applying a second layer, at +20°C, respect a waiting time of at least 12 hours and a maximum of 48 hours. If a longer waiting time is foreseen, sprinkle the surface with Poxy Quartz while the layer is still wet. The curing time shortens at higher temperatures and extends at lower temperatures. Processing temperature Poxycon, environment and substrate +8°C and +30°C. Curing At 20°C and 60% R.H.: walkable after 1 day, mechanically loadable after 3 days and fully loadable after 7 days. At lower temperatures this takes longer. During curing (approx. 24 hours at +20°C) protect Poxycon against moisture. Some applications Impregnating and/or reinforcing: apply Poxycon diluted with at most 20% Poxy DC to the surface until saturation. Consumption depending on the substrate and the application: between 0,3 and 0,5 kg/m². Priming Apply Poxycon to the floor until saturation. Consumption depending on the substrate and the application: between 0,3 and 0,5 kg/m². Coloured wear layer Pour half of the mixed Poxycon into the bucket. Add 1 box of Poxy Color of choice and mix well until a homogeneous colour is obtained. Add the rest from the bag and mix well. Open-pore Poxycon mortar First apply a base layer of Poxycon. Then add the Poxy Quartz to the well-mixed Poxycon in the bucket provided. Mix thoroughly (3 minutes mixing time). Mixing can be done with a slow-rotating mixer. Mixing ratio by weight: 1 part Poxycon and 10 parts Poxy Quartz. Process immediately. Consumption per mm layer thickness on 1 m²: approx. 0,2 kg Poxycon and 2,0 kg Poxy Quartz. Liquid-tight Poxycon mortar First apply a base layer of Poxycon. Then add the Poxy Quartz to the well-mixed Poxycon in the bucket provided. Mix thoroughly (3 minutes mixing time). Mixing can be done with a slow-rotating mixer. Mixing ratio by weight: 1 part Poxycon and 5 parts Poxy Quartz. Process immediately. Consumption per mm layer thickness on 1m²: approx. 0,4 kg Poxycon and 2,0 kg Poxy Quartz. Cleaning Clean just-used tools and any fresh contamination with Poxy DC. Personal protective equipment Suitable nitrile gloves, safety goggles and face protection. Note: Friction and mechanical load wear the surface. Staining is possible during impregnation due to the difference in suction power. The weather conditions and the UV rays can damage the colour stability. A base layer must be pore-filling. A second layer of Poxycon may therefore be necessary, or a more generous first layer. Technical specifications Base: epoxy resin and hardener. Colour: transparent. Density of the mixture at 25°C: 1,10 g/cm³. Viscosity of the mixture at 25°C: 670mPa.s. Compressive strength of 1:10 mortar: >50 N/mm². Flexural tensile strength of 1:10 mortar: >20 N/mm². Processing time at 20°C and 60% R.H.: +/- 25min. Processing temperature of material, substrate and environment: between +8°C and +30°C. Humidity during processing: < 80%. Drying times at 20°C and 60% R.H.: walkable after 1 day. mechanically loadable after 3 days. fully loadable after 7 days. Temperature resistance after full curing: +60°C. Chemical resistance after 7 days: resists acids, alkalis, oils, fats, petrols, salts and many solvents, fertilisers, urines,...; resists aggressive gases, steam and sea air. Shelf life: 12 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

2K EPOXY WEAR LAYER AND REPAIR FOR SCREEDS AND FLOORSTransparent, liquid 2-component epoxy resin for impregnating, reinforcing, priming, levelling, repairing, casting, making containment basins liquid-tight, … . By adding Poxy Quartz, epoxy mortar is obtained.AdvantagesPressure-resistant, wear-resistant and weather-resistant. Exceeds the cohesion of concrete. Mechanically and chemically loadable.UseSubstrate Apply to a load-bearing, stable and clean substrate, free from loose parts, dust, oil, grease, rubber marks, … . Mixing Remove the separating strip from the bag and mix the two components in the bag for 1 minute by kneading intensively. Process immediately. Processing time At 20°C and 60% R.H. approximately 25 minutes. Higher temperatures shorten and lower temperatures extend the working time (pot life). Applying Depending on the application with a rubber floor squeegee, a toothed rubber floor squeegee, a toothed trowel, an epoxy roller, … . Waiting times Before applying a second layer, at +20°C, respect a waiting time of at least 12 hours and a maximum of 48 hours. If a longer waiting time is foreseen, sprinkle the surface with Poxy Quartz while the layer is still wet. The curing time shortens at higher temperatures and extends at lower temperatures. Processing temperature Poxycon, environment and substrate +8°C and +30°C. Curing At 20°C and 60% R.H.: walkable after 1 day, mechanically loadable after 3 days and fully loadable after 7 days. At lower temperatures this takes longer. During curing (approx. 24 hours at +20°C) protect Poxycon against moisture. Some applications Impregnating and/or reinforcing: apply Poxycon diluted with at most 20% Poxy DC to the surface until saturation. Consumption depending on the substrate and the application: between 0,3 and 0,5 kg/m². Priming Apply Poxycon to the floor until saturation. Consumption depending on the substrate and the application: between 0,3 and 0,5 kg/m². Coloured wear layer Pour half of the mixed Poxycon into the bucket. Add 1 box of Poxy Color of choice and mix well until a homogeneous colour is obtained. Add the rest from the bag and mix well. Open-pore Poxycon mortar First apply a base layer of Poxycon. Then add the Poxy Quartz to the well-mixed Poxycon in the bucket provided. Mix thoroughly (3 minutes mixing time). Mixing can be done with a slow-rotating mixer. Mixing ratio by weight: 1 part Poxycon and 10 parts Poxy Quartz. Process immediately. Consumption per mm layer thickness on 1 m²: approx. 0,2 kg Poxycon and 2,0 kg Poxy Quartz. Liquid-tight Poxycon mortar First apply a base layer of Poxycon. Then add the Poxy Quartz to the well-mixed Poxycon in the bucket provided. Mix thoroughly (3 minutes mixing time). Mixing can be done with a slow-rotating mixer. Mixing ratio by weight: 1 part Poxycon and 5 parts Poxy Quartz. Process immediately. Consumption per mm layer thickness on 1m²: approx. 0,4 kg Poxycon and 2,0 kg Poxy Quartz. Cleaning Clean just-used tools and any fresh contamination with Poxy DC. Personal protective equipment Suitable nitrile gloves, safety goggles and face protection. Note: Friction and mechanical load wear the surface. Staining is possible during impregnation due to the difference in suction power. The weather conditions and the UV rays can damage the colour stability. A base layer must be pore-filling. A second layer of Poxycon may therefore be necessary, or a more generous first layer. Technical specifications Base: epoxy resin and hardener. Colour: transparent. Density of the mixture at 25°C: 1,10 g/cm³. Viscosity of the mixture at 25°C: 670mPa.s. Compressive strength of 1:10 mortar: >50 N/mm². Flexural tensile strength of 1:10 mortar: >20 N/mm². Processing time at 20°C and 60% R.H.: +/- 25min. Processing temperature of material, substrate and environment: between +8°C and +30°C. Humidity during processing: < 80%. Drying times at 20°C and 60% R.H.: walkable after 1 day. mechanically loadable after 3 days. fully loadable after 7 days. Temperature resistance after full curing: +60°C. Chemical resistance after 7 days: resists acids, alkalis, oils, fats, petrols, salts and many solvents, fertilisers, urines,...; resists aggressive gases, steam and sea air. Shelf life: 12 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

Novatio PQZ-220 Poxy Quarz Leveling Sand (7,5 kg) is a quartz sand for use with Novatio Poxy floor systems.This levelling sand is mixed with epoxy resin to finish floors and surfaces flat and loadable. The large 7,5 kg packaging is ideal for larger floor surfaces.Quartz levelling sand, 7,5 kgFor Novatio Poxy floor systemsReference: PQZ-220

Novatio PQZ-220 Poxy Quarz Leveling Sand Fine (1,5 kg) is a fine quartz sand for use with Novatio Poxy floor systems.This levelling sand is mixed with epoxy resin to finish floors and surfaces flat and strong. Ideal for building up an even, loadable layer during floor repair and coating.Fine quartz levelling sand, 1,5 kgFor Novatio Poxy floor systemsReference: PQZ-220

Novatio PQZ-230 Poxy Quarz Lining Sand (1 kg) is a quartz sand for lining and reinforcing surfaces with Novatio Poxy systems.This sand is combined with epoxy resin for a strong, wear-resistant lined layer. The 1 kg packaging is ideal for smaller jobs and repair work.Quartz lining sand, 1 kgFor Novatio Poxy systemsReference: PQZ-230

Novatio PQZ-230 Poxy Quarz Lining Sand (5 kg) is a quartz sand for lining and reinforcing surfaces with Novatio Poxy systems.This sand is combined with epoxy resin for a strong, wear-resistant lined layer on floors and surfaces. Packed in a convenient 5 kg packaging.Quartz lining sand, 5 kgFor Novatio Poxy systemsReference: PQZ-230

The Novatio Pressure Bottle 1,6L is a 1.6-litre pressure bottle for spraying Novatio liquids under pressure.By pressurising the bottle, you spray product evenly and without pumping, ideal for larger cleaning and treatment jobs. Practical dispensing accessory for the workshop.Pressure bottle of 1.6 litresFor even spraying under pressureProfessional Novatio accessory

The Novatio Pressure Bottle Sealing Kit is a sealing kit for the Novatio pressure bottle.With this kit you replace the seals so that the pressure bottle remains airtight and the product is sprayed correctly under pressure. Practical maintenance accessory for reliable use of the pressure bottle.Sealing kit for the pressure bottleFor airtight operationProfessional Novatio accessory