Chemical products
1091 products found
Novatio Rika Nozzle
The Novatio Rika Nozzle is a spare nozzle for the precise application of Novatio products.With this nozzle you dispense sealant, adhesive or sealing compound cleanly and precisely. Practical consumable accessory for neat processing in the workshop.Spare nozzleFor precise dispensingProfessional Novatio accessory
€12.55*incl. VAT
€10.37excl. VAT
Novatio RRE-570 Rust Remover - can 1L
NEUTRAL RUST DISSOLVERRRE-570 Rust Remover is the safest and simplest way to remove rust from all ferrous metal objects; safe and environmentally friendly as it contains no acids or other hazardous chemical substances. Rust Remover is economical because it is diluted 1/10 with water and that solution regenerates so that it can be used several times. Active action deep into all cavities and hard-to-reach places thanks to the high capillarity. Even with prolonged contact, healthy metal is not attacked or etched. Rust Remover has a preventive action that prevents immediate rust formation, so that the metal can remain unprotected for a while after treatment.AdvantagesSafe for iron and steel. Concentrate for immersion bath 1/10. Environmentally friendly. Use Remove loose rust, dirt and grease. Dilute 1 litre of Rust Remover in 10 litres of clean water in a Novabucket, which ensures 360° contact and loosened rust falls through the grid. Fully immerse the parts. Rinse the parts with clean water, wipe away any black deposit and dry thoroughly. The immersion time depends on the application. At 20°C, allow for: 15 to 30 minutes for light, superficial rust. 2 to 12 hours for a thick layer of rust. 12 to 36 hours for deep, swelling rust. The reaction will accelerate with heating (up to a maximum of +50°C). Protect the parts with Metalsol, Fixapox, Nova Finish Primer or Multi Super 5.Technical specifications Composition: 15 to 30% phosphonates. Form: liquid. Colour: transparent. Odour: characteristic. pH: 6. Density: 1.17. VOC content: 0%. Solubility in water: 100%. Shelf life: 48 months, cool and frost-free in closed, original packaging.
€23.50*incl. VAT
€19.42excl. VAT
Novatio RRE-570 Rust Remover - can 5L
NEUTRAL RUST DISSOLVERRRE-570 Rust Remover is the safest and simplest way to remove rust from all ferrous metal objects; safe and environmentally friendly as it contains no acids or other hazardous chemical substances. Rust Remover is economical because it is diluted 1/10 with water and that solution regenerates so that it can be used several times. Active action deep into all cavities and hard-to-reach places thanks to the high capillarity. Even with prolonged contact, healthy metal is not attacked or etched. Rust Remover has a preventive action that prevents immediate rust formation, so that the metal can remain unprotected for a while after treatment.AdvantagesSafe for iron and steel. Concentrate for immersion bath 1/10. Environmentally friendly. Use Remove loose rust, dirt and grease. Dilute 1 litre of Rust Remover in 10 litres of clean water in a Novabucket, which ensures 360° contact and loosened rust falls through the grid. Fully immerse the parts. Rinse the parts with clean water, wipe away any black deposit and dry thoroughly. The immersion time depends on the application. At 20°C, allow for: 15 to 30 minutes for light, superficial rust. 2 to 12 hours for a thick layer of rust. 12 to 36 hours for deep, swelling rust. The reaction will accelerate with heating (up to a maximum of +50°C). Protect the parts with Metalsol, Fixapox, Nova Finish Primer or Multi Super 5.Technical specifications Composition: 15 to 30% phosphonates. Form: liquid. Colour: transparent. Odour: characteristic. pH: 6. Density: 1.17. VOC content: 0%. Solubility in water: 100%. Shelf life: 48 months, cool and frost-free in closed, original packaging.
€92.87*incl. VAT
€76.75excl. VAT
Novatio S&B Flex-Sil Gun
The Novatio S&B Flex-Sil Gun is an application gun for processing Novatio Seal & Bond Flex-Sil.With this dispensing gun you apply the adhesive sealant evenly and in a controlled way when bonding and sealing. This lets you work efficiently and cleanly during assembly, repair and sealing work.Application gun for Novatio S&B Flex-SilFor controlled bonding and sealingProfessional Novatio tool
€2.53*incl. VAT
€2.09excl. VAT
Novatio S&B MS Construct Black Sausage 600ml
HIGH-TECH CONSTRUCTION ADHESIVE FOR BONDING AND ASSEMBLINGThis MS Polymer has an extremely fast and super-strong initial adhesion on the most diverse materials. This solvent- and isocyanate-free assembly adhesive has a super high tensile strength and shows no signs of ageing. Seal & Bond MS Construct is neutral and also acid-free, allowing it to be used on the most diverse materials, even on natural stone. Seal & Bond MS Construct allows adhesive beads of 40 mm in height to be applied without deforming.AdvantagesApplicable both indoors and outdoors, even on moist substrate. Superior initial adhesion, without sagging. Extreme tensile strength 23 kg/cm². Fast through-cure and overpaintable.Use Service temperature +5°C to +40°C. Apply the adhesive on one side in dots or beads, on a clean substrate. Clean with Safety Clean and/or Multifoam if necessary. Press the bond firmly together. Due to the high initial adhesion, support is usually unnecessary (test first). Finish adhesive seams with Safety Clean. Adhesive residues are easy to finish off with Safety Clean. Technical specifications Base: MS polymer. Colour: white or black. Odour: neutral. Specific gravity: 1.5. Viscosity: Paste. Shore hardness (DIN 53505) after 3 weeks at 23°C/50% relative humidity: 60 shore A. Shrinkage (DIN 52451) < 5%. Density (DIN EN 27390): does not sag up to a 40 mm thick seam. Elongation at break (DIN 53 504): >500%. Modulus at 100% elongation: 1.0 N/mm². Tensile strength (DIN 53504): 2.2 N/mm². Skin formation: 3-5 min. Through-cure time: 24h - 2.5 mm 48h - 3.5 mm Temperature resistance: -40°C to +90°C . Environment temperature for processing: from +5°C to +40°C. Product temperature for processing: between +5°C and +40°C. Chemical resistance: good: water, salt water, aliphatic solvents, oils, greases, diluted organic acids and alkalis moderate: ester, ketones and aromatics poor: concentrated acids, chlorinated solvents Weather resistance: perfect. Attention: First test adhesion on substrates based on PE, PP, silicones, teflon, ... . Shelf life: 12 months. Safety measures: please consult the safety data sheet.
€40.66*incl. VAT
€33.60excl. VAT
Novatio S&B MS22 X Black Sausage 600ml
HIGH-TECH SEALINGMS22 X was developed for use in all conditions: from -10°C to +40°C and where excellent adhesion and high flexibility are required. MS22 X is very resistant to weathering, UV rays and chemical corrosion. This makes it excellently suited for use in all environments, from construction to industry.AdvantagesApplicable from -10°C to +40°C. Strong and elastic. Overpaintable and mould-resistant. Ecological and safe.Use Bring the cartridge to room temperature before use. Apply to a clean substrate, free of snow and ice, cleaning with Safety Clean and/or Multifoam if necessary. FS version if required. Test adhesion on plastics, powder coatings, exotic wood species and bituminous materials. On difficult synthetic materials, Seal & Bond Special Primer can improve adhesion. First reinforce weak and/or porous substrates with Fixapox. Alkyd resin-containing paints will cure more slowly. Use Safety Clean for a perfect finish and for removing uncured Novatio polymers. Use Novakleen for finishing on porous materials.Technical specifications Base : hybrid MS polymer. Curing: polymerisation by air humidity. Odour: neutral. Shore-A hardness (DIN 53505): 22. E-modulus 100% elongation (DIN 53504 S2): +/- 0.66 N/mm². Tensile strength (DIN 53504 S2): +/- 1.4 N/mm². Elongation at break (DIN 53504 S2): +/- 600%. Movement capacity: 20%. Application temperature: -10°C to +40°C. Skin formation at 23°C/ 50% RH: 5-6 minutes. Shrinkage (DIN EN ISO 10563): ≤ 3 %. Overpaintable: yes (alkyd resin-based paints will cure with slight delay). Relative density: 1.5. Temperature resistance after curing: -40°C to +90°C. Frost resistance: to -20°C during transport. Shelf life: 18 months, stored cool and dry in the original packaging.
€31.25*incl. VAT
€25.83excl. VAT
Novatio S&B Sealtrans 600ml Transparent Sausage
FLEXIBLE SEALING AND FINISHING SEALANTSealtrans adheres perfectly to virtually all building materials and can be used safely everywhere: natural stone, mirrors, sanitary ware, worktops, … It is fully CE-certified for all these applications. This new generation of sealing compound is based on environmentally friendly technology. Unlike previous generations of silicones, Sealtrans contains no known toxic or harmful substances and is completely MEKO-free.AdvantagesSafe on natural stone. Glossy, dirt-repellent and mould- and UV-resistant.Use Processing temperature between +5°C and +40°C. Apply to a clean, stable and dry substrate. Use Safety Clean and/or Multifoam for safe cleaning and for removing uncured Novatio products. Use Seal & Bond Finisher for a perfect finish. Apply with a manual or pneumatic gun (a telescopic plunger is recommended). Use Seal & Bond Special Primer on PE, PP, Teflon and polyolefin. First reinforce weak and/or porous substrates with Fixapox. Not overpaintable and not suitable for aquariums.Technical specifications Base: neutral silicone. Odour: neutral. Shore-A hardness (DIN 53505): 24. Modulus of elasticity at 100% elongation (DIN53504): 0.37 N/mm². Elongation at break (DIN 53504): 900%. Elastic recovery: >70%. Tensile strength (DIN53504): 1.40 N/mm². Movement capability: 25%. Consistency (ISO 7390): stable up to <2mm. Curing: through contact with air humidity. Application temperature: between +5°C +40°C. Skin formation ( at 23°C and 55% RH): 20-25 min. Through-cure (at 23°C and 55% RH): 3 mm in 24h. Shrinkage (DIN EN ISO 10563): 0%. Overpaintable: no. Density at 23° and 50% RH 1.03 g/ml. Temperature resistance (after full curing): from -60°C to +155°C (peak up to +180°C). Frost resistance: to -15°C during transport. Shelf life: 18 months in closed, original packaging, cool and dry . Safety measures: please consult the safety data sheet.
€31.35*incl. VAT
€25.91excl. VAT
Novatio S&B Sealtrans Black 310ml
FLEXIBLE, DECORATIVE SEALANTSynthetic rubber polymer based on pigmented siloxanes with good adhesion to metal, aluminium, galvanisation, polyester, wood, concrete plywood, glass, most rubbers and plastics, natural stone (does not bleed through), brick, concrete, acrylic, ceramics, both mutually and in combination. Good adhesion to painted or powder-coated surfaces. Unlike previous generations of silicones, Sealtrans contains no known toxic or harmful substances and is completely MEKO-free.AdvantagesElastic bonding and sealing. Contains no plasticisers.Use Apply to clean and dry substrates, above 5°C. Finish seams with Novatio Seal & Bond Finisher. Use Seal & Bond Special Primer on PE, PP, Teflon and polyolefin. Not overpaintable. Technical specifications Base: neutral silicone. Odour: neutral. Shore-A hardness (DIN 53505): 24. Modulus of elasticity at 100% elongation (DIN53504): 0.37 N/mm². Elongation at break (DIN 53504): 900%. Elastic recovery: >70%. Tensile strength (DIN53504): 1.40 N/mm². Movement capability: 25%. Consistency (ISO 7390): stable up to <2mm. Curing: through contact with air humidity. Application temperature: between +5°C +40°C. Skin formation ( at 23°C and 55% RH): 20-25 min. Through-cure (at 23°C and 55% RH): 3 mm in 24h. Shrinkage (DIN EN ISO 10563): 0%. Overpaintable: no. Density at 23° and 50% RH 1.03 g/ml. Temperature resistance (after full curing): from -60°C to +155°C (peak up to +180°C). Frost resistance: to -15°C during transport. Shelf life: 18 months in closed, original packaging, cool and dry . Safety measures: please consult the safety data sheet.
€19.82*incl. VAT
€16.38excl. VAT
Novatio S&B Sealtrans Transparent 310ml
FLEXIBLE, DECORATIVE SEALANTSynthetic rubber polymer based on pigmented siloxanes with good adhesion to metal, aluminium, galvanisation, polyester, wood, concrete plywood, glass, most rubbers and plastics, natural stone (does not bleed through), brick, concrete, acrylic, ceramics, both mutually and in combination. Good adhesion to painted or powder-coated surfaces.AdvantagesElastic bonding and sealing. Chameleon effect for aesthetic finishing. The thickness determines the transparency. Contains no plasticisers.Use Apply to clean and dry substrates, above 5°C. - Finish seams with Novatio Seal & Bond Finisher. Use Seal & Bond Special Primer on PE, PP, Teflon and polyolefin. Not overpaintable.Technical specificationsCharacter: elastic synthetic rubber based on polysiloxanes. Consistency: paste-like. Colour: according to pigmentation: clear, aluminium, white, beige, concrete grey and black. Shrinkage: according to DIN 52451 < 1%. Sagging: according to ISO 7390 less than 1 mm. Max. permissible deformation: 25% - durable. Shore hardness A: 24 Shore A - according to ISO 868 Tensile strength: 130 N/cm². Elongation at break: 600%. E-modulus: 100% 0.3 mPa. UV resistance: very good. Mould-resistant: according to ISO 846. Overpaintable: NOT overpaintable. Curing: 2 mm / 24 h / 23°C 50% R.H. Finishing: 5 min. 23°C / 50% R.H. Thermal stability: -45°C to +155°C. Volatile organic compounds (VOC): 0.00%. Organic solvents: 0.00%. Processing temperature: from +5°C to +40°C. Shelf life: In closed cartridge, cool and dry between 5°C and 20°C, 12 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.
€19.82*incl. VAT
€16.38excl. VAT
Novatio S&B Sil 25 Opal 310ml
SWIMMING POOL REPAIR AND SEALINGThis single-component, MEKO-free, neutral silicone is suitable for the structural and elastic sealing of expansion joints, seams, cracks and passages.AdvantagesPermanently stable. High chemical resistance. Practically odourless, bacteria- and mould-resistant.UseProcessing temperature between +5°C and +40°C. Apply to a clean and stable substrate. Clean with Safety Clean and/or Multifoam if necessary. Finish using Seal & Bond Finisher. Apply with a manual or pneumatic gun (best with a telescopic plunger). Test adhesion on plastics, powder coatings, exotic wood species and bituminous materials. First reinforce weak and/or porous substrates with Fixapox. Swimming pool application: allow to cure for at least 7 days before contact with chlorinated water. Ideal glue thickness for optimum strength when bonding: 3mm. Jointing and sealing: Minimum joint width: 4mm. Maximum joint width: 25mm. Maximum joint depth: 10mm. Joint ratio: joint width in mm: 5 10 15 20 25. joint depth in mm: 5 6 10 10 10. If necessary, bring the joint to the correct depth with a convex backing rod. Not paintable.Technical specifications Base: MEKO-free neutral silicone. Form: elastic paste. Appearance: colourless glossy. Skin formation (23°C 50% RH): 15 minutes. Tack-free (23°C 50% RH): 10 minutes. Through-cure (23°C 50% RH): 2mm/24h. Volume shrinkage: after curing <4%. Tensile strength: 130N/cm². Hardness: (ISO 868) 25 Shore A. Thermal stability: -40°C to +150°C. Processing temperature: +5°C to +40°C. Adhesion: excellent with the exception of PE-PP-Teflon-Bitumen. Elongation at break: 700%. E-modulus: 100% 0.32 MPa. Overpaintable: not overpaintable. Mould- and bacteria-resistance after curing: 1 (highest class). Shelf life: minimum 12 months. Safety measures: Please consult the safety data sheet.
€25.69*incl. VAT
€21.23excl. VAT
Novatio S&B Special Primer 400ml
FAST ADHESION PRIMER FOR DIFFICULT MATERIALSSignificantly increases adhesion on hard-to-treat materials such as powder coating, painted surfaces, PP, PP/EPDM, ABS, SAN PC, PA, PUR-RIM, RTRU, PPO, PBT, PUR flexible foam, UP-GF plastic, ... .AdvantagesFor adhesives, tapes and paints. Transparent. Leaves no traces or stains. Fast and easy.Use Clean the surface with Safety Clean and/or Multifoam. Rub or blow dry. After releasing the mixing ball, shake well before use. Apply in a thin layer and let dry for 10 minutes at 20°C. Continue processing (bonding, taping, painting). The ideal combination with Novatio Sealtrans. After use, turn over and spray gas to keep the spray head clean. Offers no added value on bare metals. Technical specifications Colour: transparent. Base: polyolefin. Shelf life: 120 months at a temperature of 10°C to 25°C and max. air humidity of 60%. Consumption: ± 2-3 m² per 400ml, ± 1-1/2m² per 150 ml. Drying time: ± 10 min. VOC value: 276,4g/l. Surfaces : PP, PP/EPDM, ABS, SAN PC, PA, PUR-RIM, R-TRU, PPO, PBT, PUR flexible foam, up-GF plastic, powder coating, painted surfaces. SEAL & BOND SPECIAL PRIMER is 100% free of heavy metals. The aerosols are manufactured from recycled materials and contain only CFC-free propellants. Safety measures: please consult the safety data sheet.
€44.08*incl. VAT
€36.43excl. VAT
Novatio S&B Spray Black Sausage 600ml
SPRAYABLE HYBRID POLYMER FOR BONDING AND SEALINGSpatula-, brush- and sprayable adhesive and/or sealant based on hybrid polymers. Permanently flexible and drying under the influence of air humidity, without isocyanates and without solvents. Easy to spray and texture with the Novatio Mastergun. Seal & Bond Spray can be quickly overpainted, even wet-on-wet.AdvantagesExceptionally strong adhesion on most materials, even moist ones. Directly overpaintable. U.V.-, weather- and chemical-resistant. Reduces vibrations and sound transmission. Forms a flexible, tough and scratch-resistant layer.Use Apply to a clean substrate. Brush or dab as desired. With texture gun (Novatio Mastergun). Fit the appropriate nozzle onto the prepared cartridge and place it in the gun. Adjust the air pressure according to the desired amount of product. Remove excess product with Safety Clean. Directly overpaintable after fast skin formation. Due to the variety of varnishes and paints on the market, testing is recommended. The use of products based on alkyd resins can slow down the drying process.Technical specifications Base: ms polymer. Colour: beige or black. Odour: neutral. Viscosity: sprayable mass. Skin formation: 20 min. at 23°C. Through-cure at 23°C: 3 mm in 24 hours 5 mm in 48 hours Hardness shore A: 45. Elongation at break: 450%. Tensile strength: 70 N/cm². Temperature resistance: -40°C to +90°C – peak 140°C. Processing temperature: from +5°C to +40°C. Specific gravity: 1.38. Original packaging at a temperature of 5°C to 25°C. Shelf life: 12 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.
€39.26*incl. VAT
€32.45excl. VAT
Novatio Safety Clean - can 25l
SOLVENT FOR CHEMICAL CONTAMINATION A versatile degreaser for removing adhesive, sealants, silicones, oil, grease, wax, tar, paraffin, printing ink, ... . Safe to use on most materials such as painted surfaces, vinyl, glass, rubber, Formica, textiles, most plastics, ... . BenefitsSafe and fast. Thorough and residue-free.Use Apply to the surface to be cleaned and leave to act according to the contamination. Wipe away the loosened contamination. Repeat the treatment if necessary. For vertical applications, Safety Clean Gel is recommended. Technical specifications Composition: aliphatic hydrocarbon solvent. Boiling point/boiling range °C: 130 - 166. Colour: transparent. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,75. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 100. Volatile organic compound (VOC) g/l: 710. Shelf life: 36 months in original closed packaging, stored cool and frost-free. For specific technical information per packaging, please consult the SDS, safety data sheet.
€289.02*incl. VAT
€238.86excl. VAT
Novatio Safety Clean - can 2l
SOLVENT FOR CHEMICAL CONTAMINATION A versatile degreaser for removing adhesive, sealants, silicones, oil, grease, wax, tar, paraffin, printing ink, ... . Safe to use on most materials such as painted surfaces, vinyl, glass, rubber, Formica, textiles, most plastics, ... . BenefitsSafe and fast. Thorough and residue-free.Use Apply to the surface to be cleaned and leave to act according to the contamination. Wipe away the loosened contamination. Repeat the treatment if necessary. For vertical applications, Safety Clean Gel is recommended. Technical specifications Composition: aliphatic hydrocarbon solvent. Boiling point/boiling range °C: 130 - 166. Colour: transparent. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,75. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 100. Volatile organic compound (VOC) g/l: 710. Shelf life: 36 months in original closed packaging, stored cool and frost-free. For specific technical information per packaging, please consult the SDS, safety data sheet.
€35.11*incl. VAT
€29.02excl. VAT
Novatio Safety Clean - can 5l
SOLVENT FOR CHEMICAL CONTAMINATION A versatile degreaser for removing adhesive, sealants, silicones, oil, grease, wax, tar, paraffin, printing ink, ... . Safe to use on most materials such as painted surfaces, vinyl, glass, rubber, Formica, textiles, most plastics, ... . BenefitsSafe and fast. Thorough and residue-free.Use Apply to the surface to be cleaned and leave to act according to the contamination. Wipe away the loosened contamination. Repeat the treatment if necessary. For vertical applications, Safety Clean Gel is recommended. Technical specifications Composition: aliphatic hydrocarbon solvent. Boiling point/boiling range °C: 130 - 166. Colour: transparent. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,75. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 100. Volatile organic compound (VOC) g/l: 710. Shelf life: 36 months in original closed packaging, stored cool and frost-free. For specific technical information per packaging, please consult the SDS, safety data sheet.
€71.01*incl. VAT
€58.69excl. VAT
Novatio Safety Clean - drum 200l
SOLVENT FOR CHEMICAL CONTAMINATION A versatile degreaser for removing adhesive, sealants, silicones, oil, grease, wax, tar, paraffin, printing ink, ... . Safe to use on most materials such as painted surfaces, vinyl, glass, rubber, Formica, textiles, most plastics, ... . BenefitsSafe and fast. Thorough and residue-free.Use Apply to the surface to be cleaned and leave to act according to the contamination. Wipe away the loosened contamination. Repeat the treatment if necessary. For vertical applications, Safety Clean Gel is recommended. Technical specifications Composition: aliphatic hydrocarbon solvent. Boiling point/boiling range °C: 130 - 166. Colour: transparent. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,75. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 100. Volatile organic compound (VOC) g/l: 710. Shelf life: 36 months in original closed packaging, stored cool and frost-free. For specific technical information per packaging, please consult the SDS, safety data sheet.
€1,552.45*incl. VAT
€1,283.02excl. VAT
Novatio Safety Clean FS - aerosol 500ml
SOLVENT CLEANER AND DEGREASER FOR THE FOOD INDUSTRYSafety Clean FS is an NSF type K1 registered cleaner and degreaser formulated from ingredients that are all NSF registered. Safety Clean FS is suitable for all food-processing companies and companies that develop and repair packaging and machinery for the food industry. Safety Clean FS is a versatile degreaser that leaves no oil film or stains. Also ideal for finishing our MS Polymers.BenefitsIdeal for inorganic contamination such as grease, adhesives, silicones, oils,... Fast and versatile solvent. Ideal for the food industry. NSF approved. Safe to use on most surfaces. Dries quickly. Non-staining. Economical in use.UseWhen used in the food industry, remove or cover all foodstuffs and packaging before cleaning. Spray the surface and leave to act briefly. Wipe dry with a clean lint-free cloth. Repeat the operation if necessary. Technical specifications NSF registration number: 143422, category K1. Boiling point/boiling range °C: 130- 166. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,764. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 97 Always rinse the cleaned surface with clean water. Shelf life: 36 months, dry, cool and frost-free.
€15.80*incl. VAT
€13.06excl. VAT
Novatio Safety Clean FS - can 25l
SOLVENT CLEANER AND DEGREASER FOR THE FOOD INDUSTRY Suitable for all food-processing companies and companies that develop and repair packaging and machinery for the food industry. A versatile degreaser that leaves no oil film or stains. Also ideal for finishing our adhesives and sealants. BenefitsFor removing inorganic contamination such as grease, adhesives, silicones, oils,... Fast, versatile and safe on most surfaces. Non-staining and fast-drying.UseWhen used in the food industry, remove or cover all foodstuffs and packaging before cleaning. Spray the surface and leave to act briefly. Wipe dry with a clean lint-free cloth. Repeat the operation if necessary. Wash off with soap and/or rinse abundantly with water. Dry with a clean cloth. Technical specifications NSF registration number: 170174, category K1. Boiling point/boiling range °C: 130- 166. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,764. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 97 Always rinse the cleaned surface with clean water. Shelf life: 36 months, dry, cool and frost-free.
€294.41*incl. VAT
€243.31excl. VAT
Novatio Safety Clean FS - can 5l
SOLVENT CLEANER AND DEGREASER FOR THE FOOD INDUSTRY Suitable for all food-processing companies and companies that develop and repair packaging and machinery for the food industry. A versatile degreaser that leaves no oil film or stains. Also ideal for finishing our adhesives and sealants. BenefitsFor removing inorganic contamination such as grease, adhesives, silicones, oils,... Fast, versatile and safe on most surfaces. Non-staining and fast-drying.UseWhen used in the food industry, remove or cover all foodstuffs and packaging before cleaning. Spray the surface and leave to act briefly. Wipe dry with a clean lint-free cloth. Repeat the operation if necessary. Wash off with soap and/or rinse abundantly with water. Dry with a clean cloth. Technical specifications NSF registration number: 170174, category K1. Boiling point/boiling range °C: 130- 166. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,764. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 97 Always rinse the cleaned surface with clean water. Shelf life: 36 months, dry, cool and frost-free.
€72.01*incl. VAT
€59.51excl. VAT
Novatio Safety Clean GEL 500ml - 683001000
Novatio Safety Clean GEL 500ml - Effective and Safe CleaningThe Novatio Safety Clean GEL 500ml is a powerful cleaning gel specially developed for thoroughly and safely removing dirt and contamination. Thanks to its gel texture, the product stays well on the surface, ensuring optimal action without dripping.This cleaning gel is ideal for use in various environments, such as industrial workshops, laboratories and households where hygiene and safety are paramount. The product is user-friendly, fast-acting and suitable for various surfaces.Key features:Content: 500mlEffective dirt and grease removalSafe to use on various surfacesGel texture for optimal adhesionSuitable for professional and private useWith the Novatio Safety Clean GEL 500ml you are assured of reliable and efficient cleaning that meets high quality and safety standards.
€24.42*incl. VAT
€20.18excl. VAT
Novatio Safety Clean RV - aerosol 500ml - M&C
SOLVENT FOR CHEMICAL CONTAMINATION A versatile degreaser for removing adhesive, sealants, silicones, oil, grease, wax, tar, paraffin, printing ink, ... . Safe to use on most materials such as painted surfaces, vinyl, glass, rubber, textiles, most plastics, ... .BenefitsSafe and fast. Thorough and residue-free.Use Apply to the surface to be cleaned and leave to act according to the contamination. Wipe away the loosened contamination. Repeat the treatment if necessary. Technical specifications Composition: aliphatic hydrocarbon solvent. Boiling point/boiling range °C: 130 - 166. Colour: transparent. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,75. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 100. Volatile organic compound (VOC) g/l: 710. Shelf life: 36 months in original closed packaging, stored cool and frost-free. For specific technical information per packaging, please consult the SDS, safety data sheet.
€15.10*incl. VAT
€12.48excl. VAT
Novatio Safety Clean Windows and Doors - aerosol 500ml
CLEANER FOR CHEMICAL CONTAMINATIONThe safe and versatile solvent for removing adhesive, sealants, silicones, oil, grease, wax, tar, paraffin, printing ink, ... . Aliphatic hydrocarbon solvent, safe to use on most materials such as painted surfaces, vinyl, glass, rubber, Formica, textiles, most plastics, ... .BenefitsFinishing of seam sealant. Removing uncured silicones, old adhesive residue from tapes.Use Apply and leave to act according to the contamination. Wipe away the loosened contamination. Repeat the treatment if necessary. Technical specifications Boiling point/boiling range °C: 130 - 166. Vapour pressure/20°C hPa: 4,6. Relative density/20°C: 0,75. Physical state/20°C: liquid. Flash point °C: 24. Auto-ignition °C: 200. Water solubility: insoluble. Odour: characteristic. Dynamic viscosity mPa.s/20°C: 1. Kinematic viscosity, mm²/s/20°C: 1. Volatile organic compound (VOC) %: 100. Volatile organic compound (VOC) g/l: 710. Shelf life: 36 months in original closed packaging, stored cool and frost-free. For specific technical information per packaging, please consult the SDS, safety data sheet.
€15.52*incl. VAT
€12.83excl. VAT
Novatio Safety Click
PLASTIC VALVE HOLDER. NO RUSTBenefitsQuick attachment without screws.
€3.29*incl. VAT
€2.72excl. VAT
Novatio Safety Scraper
SAFETY SCRAPERThe Safety Scraper is a safety knife made from strong plastic and can also be used on delicate surfaces. The safety blade of the Safety Scraper is unbreakable. You can put the Safety Scraper in your pocket without risk thanks to the handy closing system, and its striking colour makes it easy to find again.AdvantagesLightweight - safe to use - safe in your pocket. As sharp as a razor blade. Lasts 30 times longer. Very flexible, can be bent. Replacement blades available.
€11.41*incl. VAT
€9.43excl. VAT
Purchase Chemical Products
Equipped with the right chemical products, you have everything needed for the maintenance or, if required, the repair of your forklift, stacker, reach truck, scissor lift or other industrial vehicles. But also for other applications, such as treating window frames, doors and garage doors, we offer the perfect solution. A spotless floor, a lubricated engine or a sparkling machine? For every task, you’ll find the perfect product in our wide range.
JVD Parts offers chemical products from renowned brands such as Motip, Novatio, Würth and Zep. This way, you can be sure of smooth, flawless, and safe operation of your new purchase. Order your chemical products online easily and receive them within a maximum of 2 working days. Or contact us with your queries.
Wide Range of Chemical Products
The benefits of using chemical products for the maintenance of your industrial vehicle and other applications? They improve reliability and durability while reducing long-term maintenance costs. That’s why JVD Parts, as a specialist in the field, always has a large stock readily available. In our webshop, you’ll find the following industrial chemicals:
- Additives for cleaning cooling systems and radiators
- Floor cleaners for spotless floor surfaces
- Lubricants for smooth operation of moving parts
- Surface protection and treatment for increased lifespan
- Cleaners and degreasers for cleaning and maintaining your machines
- Paint to
touch up scratches or other minor damages
Selecting the Right Chemical Products
At JVD Parts, you can choose from a comprehensive range of chemical products for every type of equipment. Be sure to consider the following factors when making your purchase:
- Usage: choose the right category to find the product suited for your purpose.
- Functionality: not all chemical products work the same way, check the instructions for use.
- Safety: read the safety guidelines before use and adhere to them strictly.
Top Chemical Products Online at JVD Parts
As part of Joris Van Dijck, JVD Parts boasts over 65 years of experience with forklifts, stackers, reach trucks, and other industrial vehicles. We understand better than anyone else that chemical products are indispensable for you. You can shop quickly and easily via our webshop and receive your order within a maximum of 2 working days. Questions about chemical products? Contact JVD Parts, we’re happy to assist.
Contact