To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Fishfinder-houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

108 products found

RAM® holder for large marine electronics with locking nut - medium

RAM® holder for large marine electronics with locking nut - medium

The RAM-D-111-MIU consists of a round base of 3.68" diameter, a double socket arm of STANDARD LENGTH, locking nut and a rectangular base of 11" x 3". The round base features pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangular base features various combinations of pre-drilled holes that fit many electronic devices and holders, including marine GPS, CB radios, ham radios, gimbal brackets and more.

€298.20*incl. VAT

€246.45excl. VAT

RAM® holder for large marine electronics with locking nut - short

RAM® holder for large marine electronics with locking nut - short

The RAM-D-111U-C-MI1 consists of a round base of 3.68" diameter, a SHORT double socket arm with 2-way locking nut and a rectangular base of 11" x 3". The round base features pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangular base features various combinations of pre-drilled holes that fit many electronic devices and holders, including marine GPS, CB radios, ham radios, gimbal brackets and more.

€247.08*incl. VAT

€204.20excl. VAT

RAM® holder for large marine electronics with RAM® Hi-Torq key - medium

RAM® holder for large marine electronics with RAM® Hi-Torq key - medium

The RAM-D-111-KNOB9HU consists of a round base of 3.68" diameter, a double socket arm of STANDARD length and a rectangular plate of 11" x 3". The round base features pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangular plate features various combinations of pre-drilled holes that fit many electronic devices and holders, including marine GPS, CB radios, ham radios, gimbal brackets and more. This holder includes the RAM Hi-Torq™ key; designed for use with the knob on D size ball arms and holders. The key follows the shape of the knob and lets you tighten the arm extra firmly. This key was originally made for the military when using RAM mounts in cold weather, when the knob could not be tightened by hand.

€332.93*incl. VAT

€275.15excl. VAT

RAM® holder for large marine electronics with RAM® Hi-Torq key - short

RAM® holder for large marine electronics with RAM® Hi-Torq key - short

The RAM® holder for large marine electronics with RAM® Hi-Torq key (RAM-D-111-C-KNOB9H) is a complete drill-mount solution for fishfinders, chartplotters and other large electronic devices. This kit consists of D size components, including a round base of 3.68" diameter, a short double socket arm and a rectangular adapter plate of 11" x 3". The base is pre-drilled with two holes at 180° and three holes at 120°. The plate has various combinations of pre-drilled holes that fit electronic devices and holders such as marine GPS units, CB radios, ham radios, gimbal brackets and more. This kit includes the RAM® Hi-Torq™ key, designed to provide extra leverage when tightening D size arms. This provides a firmer grip and is especially handy in cold weather, when extra clamping force helps to prevent the ball from slipping.

€297.12*incl. VAT

€245.55excl. VAT

RAM® holder for marine electronics - D-size long

RAM® holder for marine electronics - D-size long

The RAM-D-115-E consists of a base with a 2.25" diameter D-size ball, a long arm and a 6.25" x 2" marine electronics plate with a D-size ball for supporting larger devices. This marine electronics plate contains various combinations of pre-drilled holes and fits directly onto gimbal brackets of 9"-12" fishfinders. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.

€306.05*incl. VAT

€252.93excl. VAT

RAM® holder for marine electronics with RAM® Hi-Torq™ key

RAM® holder for marine electronics with RAM® Hi-Torq™ key

The RAM-D-115-C-KNOB9H consists of a base with a D size ball of 2.25" diameter, a short arm, a Hi-Torq™ key and a marine electronics plate of 6.25" x 2" with a D size ball for supporting larger devices. This marine electronics plate features various combinations of pre-drilled holes and fits directly onto gimbal brackets of 9"-12" fishfinders. For cold weather environments, the supplied Hi-Torq key helps to tighten the knob on the arm for a firm grip. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.

€244.93*incl. VAT

€202.42excl. VAT

RAM® horizontal 12" swing arm mount for fishfinders & plotters

RAM® horizontal 12" swing arm mount for fishfinders & plotters

The RAM double swing arm mount includes two 6" long curved swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a 6.25 x 2" rectangular top base. The pivot points of the mount allow a full 360-degree rotation.

€199.03*incl. VAT

€164.49excl. VAT

RAM® horizontal 6" swing arm mount for fishfinders & plotters

RAM® horizontal 6" swing arm mount for fishfinders & plotters

The RAM-109HU consists of a 6" long curved swing arm mounted on a horizontal surface base. At the device mounting end is a 6.25" x 2" rectangular plate. There are two pivot points on the mount: one at the base of the swing arm and one in the centre of the rectangular plate. Each pivot point allows a full 360-degree rotation.

€128.80*incl. VAT

€106.45excl. VAT

RAM® horizontal 6" swing arm mount with ball-and-socket rectangular plate

RAM® horizontal 6" swing arm mount with ball-and-socket rectangular plate

The RAM single swing and socket arm mount includes a 6" straight swing arm mounted on a horizontal surface mounting base. At the end of the mount is a 6.25" x 2" rectangular top base. The pivot point of the rectangular base allows a 180-degree rotation, the swing arm allows a 360-degree rotation.

€149.34*incl. VAT

€123.42excl. VAT

RAM® horizontal swing arm mount for Lowrance Elite-5 series

RAM® horizontal swing arm mount for Lowrance Elite-5 series

The RAM-109H-2B-B-LO11 consists of a 6" long straight swing arm mounted on a horizontal surface mounting base. At the free end of the swing arm is a 1.5" C size ball. The connection between the swing arm and the base is a bolt pivot point, and the connection between the round plate and the arm is the RAM ball-and-socket system. The bolt pivot point allows a full 360-degree rotation and the ball-and-socket system allows a 180-degree vertical tilt with a 360-degree rotation. Included is a short-length double socket arm in C size, as well as the RAM Lowrance adapter base with a 1.5" diameter rubber ball that inserts directly into the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti², HOOK-3, HOOK-4, HOOK-5 and MARK-5 fishfinders. The adapter acts as a quick-release mechanism, allowing you to remove or move your fishfinder in seconds.

€248.15*incl. VAT

€205.08excl. VAT

RAM® horizontal swing arm with double ball mount

RAM® horizontal swing arm with double ball mount

The RAM single swing and socket arm mount includes a 6" straight swing arm mounted on a horizontal surface mounting base. At the end of the mount is a 6.25" x 2" rectangular top base. The bolt pivot point of the mount allows a 360-degree rotation.

€256.83*incl. VAT

€212.26excl. VAT

RAM® Large Marine Electronics Mount

RAM® Large Marine Electronics Mount

The RAM-137U, a powder-coated marine-grade aluminium mount, consists of a double socket arm mount, one round base with a diameter of 2.5" with a rubber ball of 1.5" and a flat rectangular plate of 11" x 3". The plate features various combinations of pre-drilled holes that match many electronic devices and mounts, including marine GPS, CB radios, amateur radios, gimbal brackets and more. The rubber ball-and-socket technology dampens shocks and vibrations and also allows a virtually infinite adjustment and perfect viewing angles.

€143.23*incl. VAT

€118.37excl. VAT

RAM® mount for large marine electronics - D-size long

RAM® mount for large marine electronics - D-size long

The RAM® mount for large marine electronics (RAM-D-111U-E) is a complete drill-down mounting solution for fishfinders, chartplotters and other large electronic devices. This kit consists of D-size components, including a round base of 3.68" diameter, a long double socket arm and a rectangular adapter plate of 11" x 3". The round base is pre-drilled with several combinations of holes, including two holes at 180° and three holes at 120°. The adapter plate contains various combinations of pre-drilled holes that fit popular electronic devices and gimbal brackets. Included are four shoulder washers that allow smaller fasteners to fit properly into the large holes of this plate.

€337.28*incl. VAT

€278.74excl. VAT

RAM® mount for large marine electronics - D-size short

RAM® mount for large marine electronics - D-size short

The RAM-D-111U-C consists of a short double socket arm, a round base of 3.68" diameter and a rectangular base of 11" x 3". The round base contains a D-size rubber ball of 2.25" and pre-drilled holes, including the universal AMPS hole pattern. The rectangular base also contains a D-size rubber ball of 2.25" and a variety of pre-drilled holes compatible with various large marine electronic devices, including fishfinders and chartplotters. Included are four shoulder washers that allow smaller fasteners to fit properly into the large holes of this plate.

€237.15*incl. VAT

€195.99excl. VAT

RAM® mount for marine electronics - D-size medium

RAM® mount for marine electronics - D-size medium

The RAM® mount for large marine electronics (RAM-D-115) is a complete drill-down mounting solution for fishfinders, chartplotters and other large electronic devices. This kit consists of D-size components, including a round base of 3.68" diameter, a medium-length double socket arm and a rectangular adapter plate of 6.25" x 2". The round base is pre-drilled with several combinations of holes, including two holes at 180° and three holes at 120°. The adapter plate contains various combinations of pre-drilled holes that fit popular electronic devices and gimbal brackets. Included are four shoulder washers that allow smaller fasteners to fit properly into the large holes of this plate.

€269.39*incl. VAT

€222.64excl. VAT

RAM® Pin-Lock™ holder for marine electronics - B-size medium

RAM® Pin-Lock™ holder for marine electronics - B-size medium

The RAM-S-B-111U consists of a 2.5" diameter round base, a SHORT double socket arm, a 6.25" x 2" rectangular base, a RAM combination Pin-Lock™ security nut and key knob. The 6.25" x 2" rectangular base is a universal mounting bracket with a choice of mounting hole positions. In certain applications, additional holes may need to be drilled for a proper fit with your electronic device.

€78.36*incl. VAT

€64.76excl. VAT

RAM® Pin-Lock™ holder for marine electronics - C-size medium

RAM® Pin-Lock™ holder for marine electronics - C-size medium

The RAM-S-111U consists of a round base of 2.5" diameter, a double socket arm with STANDARD LENGTH, a 6.25" x 2" rectangular base, a RAM mixed Pin-Lock™ security nut and key knob. The 6.25" x 2" rectangular base is a universal mounting bracket with a choice of mounting hole positions. In certain applications, additional holes may need to be drilled for a proper fit with your electronic device.

€113.53*incl. VAT

€93.83excl. VAT

RAM® Pin-Lock™ holder for marine electronics - D-size medium

RAM® Pin-Lock™ holder for marine electronics - D-size medium

The RAM-S-D-111 consists of a round base of 3.68" diameter, a double socket arm with STANDARD LENGTH, an 11" x 3" rectangular base, a RAM mixed Pin-Lock™ security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangular base contains various combinations of pre-drilled holes that fit many electronic devices and holders, including Marine GPS, CB radios, ham radios, Gimbal brackets and more. RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are often used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low-profile and add only a little extra bulk to your system compared to the included standard knob. At a fraction of the cost of the key-lockable knobs currently available, the added peace of mind and tamper resistance comes at a very affordable price.

€297.51*incl. VAT

€245.88excl. VAT

RAM® Pin-Lock™ holder for marine electronics - D-size short

RAM® Pin-Lock™ holder for marine electronics - D-size short

The RAM-S-D-111U-C consists of a 3.68" diameter round base, a SHORT double socket arm, an 11" x 3" rectangular base, a RAM combination Pin-Lock™ security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangular base contains various combinations of pre-drilled holes that fit many electronic devices and holders, including Marine GPS, CB radios, ham radios, Gimbal brackets and more.

€248.13*incl. VAT

€205.07excl. VAT

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - B-size medium

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - B-size medium

The RAM-SG-B-111U consists of a round base of 2.5" diameter, a double socket arm with STANDARD LENGTH, a 6.25" x 2" rectangular plate, a RAM mixed Pin-Lock™ security nut/knob and key knobs for Gimbal brackets. The 6.25" x 2" rectangular plate is a universal mounting bracket with a choice of mounting hole positions. In certain applications, additional holes may need to be drilled for a proper fit with your electronic device.

€102.41*incl. VAT

€84.64excl. VAT

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - C-size medium

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - C-size medium

The RAM-SG-111U consists of a round base of 2.5" diameter, a double socket arm with STANDARD LENGTH, a 6.25" x 2" rectangular base, a RAM mixed Pin-Lock™ security nut/knob and key knobs for Gimbal brackets. The 6.25" x 2" rectangular base is a universal mounting bracket with a choice of mounting hole positions. In certain applications, additional holes may need to be drilled for a proper fit with your electronic device.

€137.88*incl. VAT

€113.95excl. VAT

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - D-size medium

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - D-size medium

The RAM-SG-D-111U consists of a round base of 3.68" diameter, a double socket arm with STANDARD LENGTH, an 11" x 3" rectangular base, a RAM mixed Pin-Lock™ security nut/knob and key knob for Gimbal brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangular base contains various combinations of pre-drilled holes that fit many electronic devices and holders.

€321.56*incl. VAT

€265.75excl. VAT

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - D-size short

RAM® Pin-Lock™ holder for marine electronics with Gimbal knob - D-size short

The RAM-SG-D-111U-C consists of a 3.68" diameter round base, a SHORT double socket arm, an 11" x 3" rectangular base, a RAM combination Pin-Lock™ security nut/knob and key knob for Gimbal brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangular base contains various combinations of pre-drilled holes that fit many electronic devices and holders.

€272.61*incl. VAT

€225.30excl. VAT

RAM® strap clamp mount with hardware for Garmin GPSMAP + more

RAM® strap clamp mount with hardware for Garmin GPSMAP + more

The RAM-108-G1 consists of the 1" diameter ball-and-socket system with RAM 2.5" diameter universal plate and connecting hardware. This mount is designed as a universal mounting solution for both RAM and non-RAM products. The hole pattern on the 2.5" plate fits a large number of third-party mounts and holders. The strap mounting base is suitable for a rail diameter from 1.0" up to a maximum of 1.9". The 1" rubber ball sits at a right angle to the mounting base, causing the ball to sit at a right angle to the rail. The base includes one 6.0" and one 8.0" length metal strap, along with a rubber strip of approximately 5.5" length to prevent scratches or marks on your rail.

€90.69*incl. VAT

€74.95excl. VAT