info@jvdparts.be
Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)
Go to homepage
€0.00*incl. VAT €0.00excl. VAT
Go to homepage
€0.00*incl. VAT €0.00excl. VAT
header.navigation.popularParts
Trojan Battery Company
Trojan Battery Company
Novatio
Novatio
Expresso
Expresso
RAM Mounts
RAM Mounts
Filter products
Filter products
–

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders
2497 products found
RAM® 75x75mm VESA plate with ball and steel-reinforced post

RAM® 75x75mm VESA plate with ball and steel-reinforced post

This RAM-2461U-IN1 consists of a 1.5" rubber ball connected to a steel-reinforced 3.625" square plate with a 75mm x 75mm VESA hole pattern. The rubber ball is located 0.88" from the centre of one edge.

€49.20*incl. VAT
€40.66excl. VAT
More info
RAM® 75x75mm VESA plate with ball and steel-reinforced post - D-size

RAM® 75x75mm VESA plate with ball and steel-reinforced post - D-size

The RAM® 75x75mm VESA plate with ball and steel-reinforced post (RAM-D-2461U-IN1) features a 2.25" D-size rubber ball connected to a 3.625" steel-reinforced square plate that is reinforced with a steel bolt, ideal for heavy duty mounting. The rubber ball is positioned 0.88" from the centre of one edge.

€69.19*incl. VAT
€57.18excl. VAT
More info
RAM® 8.5" Lower Pole for RAM® Tough-Box™ Consoles

RAM® 8.5" Lower Pole for RAM® Tough-Box™ Consoles

The RAM® 8.5" Lower Pole for RAM® Tough-Box™ Consoles is a support pole for the RAM® Tough-Box™ vehicle console.This 8.5" lower pole connects the console to the vehicle base and determines the mounting height of the console. Ideal for fitting out commercial and emergency vehicles.8.5" lower pole for Tough-Box™ consolesDetermines the mounting heightFor vehicles and material handlingOriginal RAM Mounts part.

€22.45*incl. VAT
€18.55excl. VAT
More info
RAM® 8" lockable upper pole

RAM® 8" lockable upper pole

The RAM upper Tele-Pole™, 8" male pole, features a swing arm connection point that fits directly onto any double swing arm system with a 1.5" socket. The male pole is 8" long and has a diameter of 1.328". The locking knob features a brass 5/16"-18 thread; this allows you to disable the screwing action of the knob. Once you have set your holder in the desired position, you can lock it in place and be assured that your mounted device stays exactly where you left it.

€84.54*incl. VAT
€69.87excl. VAT
More info
RAM® 8" long PVC pipe

RAM® 8" long PVC pipe

The RAM® 8" long PVC pipe (art. RAP-PP-1108) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The PVC pipe forms the connecting piece in the RAM® socket-arm system and bridges the distance between base and holder. This lets you position a device at the desired height or distance, while retaining the firm clamping action of the ball-and-socket principle.Part of the RAM® ball-and-socket mounting systemFor extra reach or positioning of holder and baseOriginal RAM Mounts part.

€7.43*incl. VAT
€6.14excl. VAT
More info
RAM® 8" top flange pole with double ball mount

RAM® 8" top flange pole with double ball mount

The RAM® 8" top flange pole with double ball mount (RAM-VP-TTMF8-101U-D) consists of an 8" upper male Tele-Pole™ with a connection point for the 3-piece ball-and-socket system. The 2.5" round ball has the universal 4-hole AMPS hole pattern to connect any RAM® device holder or GDS® Dock™. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the pole. Once the knob is tightened, the Tele-Pole™ becomes a sturdy support for connecting devices or holders. The Tele-Pole™ connects to any RAM® vehicle base with a welded female Tele-Pole™.

€196.32*incl. VAT
€162.25excl. VAT
More info
RAM® 8" Top Pole

RAM® 8" Top Pole

The RAM upper Tele-Pole™, 8" male pole, includes a swing arm connection point that fits directly onto any double swing arm system with a 1.5" socket. The male pole is 8" long and has a diameter of 1.328".

€65.74*incl. VAT
€54.33excl. VAT
More info
RAM® 8" Top Pole with double flange

RAM® 8" Top Pole with double flange

The RAM-VP-TTMFD8U consists of an 8" double flange plate, connected to an 8" male Tele-Pole™. The flange plate has dual mounting points for swing arms, bases with the AMPS hole pattern and the RAM 120-degree hole pattern. Common applications include mounting a display with keyboard, a handheld mobile computer with portable printer or a similar device combination. The male Tele-Pole™ is 8" long and has a diameter of 1.328".

€169.22*incl. VAT
€139.85excl. VAT
More info
RAM® 8" Top Pole with double swing arms & large round plate

RAM® 8" Top Pole with double swing arms & large round plate

The RAM-VP-SW1-8-240 consists of an 8" upper male Tele-Pole™, double swing arm and 3.68" round base. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the pole. Once the knob is tightened, the Tele-Pole™ becomes a sturdy support for connecting devices or mounts. The Tele-Pole™ connects to any RAM vehicle base with a welded female Tele-Pole™. With the double swing arm with rotating plate you can rotate and tilt the viewing angle of your connected electronic device when it is mounted on your RAM vehicle mount. The rotating swing arm gives you even more viewing positions for your mounted electronic device while everything stays firmly in place. The length of the double swing arm is 12". The 3.68" round base contains pre-drilled holes that connect to RAM Tough-Dock™ powered docking stations.

€231.07*incl. VAT
€190.97excl. VAT
More info
RAM® 8" Top Pole with single swing arm & 75x75mm VESA plate

RAM® 8" Top Pole with single swing arm & 75x75mm VESA plate

The RAM-VP-SW2-8-2461 consists of an 8" upper male Tele-Pole™, single swing arm and 3.625" square base with the VESA hole pattern. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the pole. Once the knob is tightened, the Tele-Pole™ becomes a sturdy support for connecting devices or mounts. The Tele-Pole™ connects to any RAM vehicle base with a welded female Tele-Pole™. The length of the double swing arm is 6". The 3.625" square base contains a 75mm X 75mm VESA hole pattern with a 1.5" rubber ball 0.88" from the centre of one edge.

€185.49*incl. VAT
€153.30excl. VAT
More info
RAM® 8" Top Pole with single swing arm & round plate

RAM® 8" Top Pole with single swing arm & round plate

The RAM-VP-SW2-8 consists of an 8" upper male Tele-Pole™, single swing arm and 2.5" round base with the universal AMPS hole pattern. The Tele-Pole™ is easily adjustable by turning the knob at the top of the pole. Once the knob is tightened, the Tele-Pole™ becomes a sturdy support for connecting devices or mounts. The Tele-Pole™ fits any RAM vehicle base with a welded female Tele-Pole™. The length of the swing arm is 6".

€182.61*incl. VAT
€150.92excl. VAT
More info
RAM® 8" upper flange pole with D-size 75x75mm VESA holder

RAM® 8" upper flange pole with D-size 75x75mm VESA holder

This 8" upper flange pole consists of an 8" upper pole, a D-size ball base and medium-length double socket arm, and a D-size 75x75mm VESA holder to connect to your device holder. Combine this upper pole with a RAM® vehicle base compatible with your specific vehicle for a robust mobile workstation.

€293.70*incl. VAT
€242.73excl. VAT
More info
RAM® 8" upper pole with double swing arms & 75x75mm VESA plate

RAM® 8" upper pole with double swing arms & 75x75mm VESA plate

The RAM-VP-SW1-8-2461 consists of an 8" upper Tele-Pole™ with external thread, double swing arm and 3.625" square base with the VESA hole pattern. The Tele-Pole™ is easily adjusted by turning the knob at the top of the pole. Once the knob is tightened, the Tele-Pole™ becomes a sturdy support for connecting devices or holders. The Tele-Pole™ fits any RAM vehicle base with a welded-on female-thread Tele-Pole™. With the double swing arm with rotating plate, you can rotate and tilt the viewing angle of your connected electronic device when it is mounted on your RAM vehicle holder. The rotating swing arm offers you even more viewing positions for your mounted electronic device, while keeping everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with a 1.5" rubber ball 0.88" from the centre of one edge.

€233.41*incl. VAT
€192.90excl. VAT
More info
RAM® 8" Upper Pole with Dual Ball Holder and 100x100mm VESA Plate

RAM® 8" Upper Pole with Dual Ball Holder and 100x100mm VESA Plate

The RAM® 8" Upper Pole with Dual Ball Holder and 100x100mm VESA Plate is a mounting pole from RAM Mounts for displays and tablets.This 8" upper pole, with its dual ball holder and 100x100mm VESA plate, provides a flexible, adjustable mounting point for a display or tablet. Ideal for building on top of a vehicle base in vehicles and material handling.8" upper pole with dual ball holderWith 100x100mm VESA plateFor vehicles and material handlingOriginal RAM Mounts part.

€286.92*incl. VAT
€237.12excl. VAT
More info
RAM® 8" upper pole with flange and double swing arms

RAM® 8" upper pole with flange and double swing arms

The RAM® 8" upper pole with flange and double swing arms is an adjustable mounting element from RAM Mounts.This 8" upper pole with flange and double swing arms provides a sturdy, flexible mounting point for a screen or holder and is firmly attached with the flange. Ideal for building on top of a vehicle base in vehicles and material handling.8" upper pole with flangeWith double swing armsFor vehicles and material handlingOriginal RAM Mounts part.

€199.00*incl. VAT
€164.46excl. VAT
More info
RAM® 8" upper pole with single swing arm and large round plate

RAM® 8" upper pole with single swing arm and large round plate

The RAM-VP-SW2-8-240 consists of an 8" upper Tele-Pole™ with external thread, single swing arm and 3.68" round base. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the pole. Once the knob is tightened, the Tele-Pole™ becomes a firm support for connecting devices or mounts. The Tele-Pole™ fits any RAM vehicle base with a welded Tele-Pole™ with internal thread. The length of the dual swing arm is 6". The 3.68" round base includes pre-drilled holes that connect to RAM Tough-Dock™ Powered docking stations.

€194.73*incl. VAT
€160.93excl. VAT
More info
RAM® 9" long flexible pipe with 1/4" NPSM male thread

RAM® 9" long flexible pipe with 1/4" NPSM male thread

The RAM-PF-585-9 is a 9" flexible metal pipe, with composite sheath, with a 1/4" NPSM male thread on both ends.

€60.37*incl. VAT
€49.89excl. VAT
More info
RAM® 9" long pipe with 1/2" NPT male thread

RAM® 9" long pipe with 1/2" NPT male thread

The RAM-PA8209 is a 9" long rigid aluminium pipe with a 1/2" NPT male thread on both ends.

€49.91*incl. VAT
€41.25excl. VAT
More info
RAM® 9" long pipe with 1/4" NPT male thread

RAM® 9" long pipe with 1/4" NPT male thread

The RAM-PA5409 is a 9" long rigid aluminium pipe with a 1/4" NPT male thread at both ends.

€40.37*incl. VAT
€33.36excl. VAT
More info
RAM® 9" lower pole

RAM® 9" lower pole

The RAM Tele-Pole 9" tall female tube base has a square plate base that fits many of the RAM-VB No-Drill™ and drill-plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX upper Tele-Poles™. The female pole is 9" tall and has a diameter of 1.375".

€47.92*incl. VAT
€39.60excl. VAT
More info
RAM® 9" x 9" aluminium weighted base with AMPS hole pattern

RAM® 9" x 9" aluminium weighted base with AMPS hole pattern

The RAM-251-1SA is a 9" x 9" aluminium base with the universal AMPS hole pattern. You can screw one of our drill-down mounts onto this base to create a non-permanent mount for static environments.

€261.72*incl. VAT
€216.30excl. VAT
More info
RAM® 90-degree 1" NPT threaded hole with small square base

RAM® 90-degree 1" NPT threaded hole with small square base

The RAM® 90-degree 1" NPT threaded hole with small square base (art. RAM-D-232S-90U) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchoring point of a RAM® setup and is combined with ball, arm and holder into a solid whole.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-232S-90UOriginal RAM® Mounts part.

€38.66*incl. VAT
€31.95excl. VAT
More info
RAM® 90-degree 1/2" NPT threaded hole with round base

RAM® 90-degree 1/2" NPT threaded hole with round base

The RAM-232-90U consists of a 2.5" diameter base with 1/2" NPT female thread at a 90-degree angle relative to the base. This part fits any 1/2" NPT male thread, including the rigid RAM-PA82XX arm series.

€35.44*incl. VAT
€29.29excl. VAT
More info
RAM® 90-degree 1/4" NPT threaded hole with round base

RAM® 90-degree 1/4" NPT threaded hole with round base

The RAM® 90-degree 1/4" NPT threaded hole with round base (art. RAM-B-232-90U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchoring point of a RAM® setup and is combined with ball, arm and holder into a sturdy whole.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-232-90UOriginal RAM® Mounts part.

€34.32*incl. VAT
€28.36excl. VAT
More info
The forklift parts
specialist in Belgium
Order your products
online safely
Orders
shipped the same day
Easy parts
returning
This website uses cookies to ensure the best experience possible. More information...