To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® powered lockable dock for Zebra ET8x 2-in-1 tablet

RAM® powered lockable dock for Zebra ET8x 2-in-1 tablet

This lockable RAM® Dock (RAM-HOL-ZE22LU) has a powered form-fit design specifically for the Zebra ET8x tablets. Built for versatility in the field, this dock supports the device with or without the Rugged Frame and is compatible with the optional Friction Hinge Rugged Keyboard. Power is supplied via the pogo pin docking contacts and passed through the dock's 5.5mm DC power port. Thoughtfully designed, this dock also accommodates tablet expansions such as the Zebra Expansion Back, GDS® Roto-Mag™ and GDS® Hand-Stand™ ergonomic accessories. Brave the elements with options to expand your dock with temperature modules. The RAM® Temp-Right™ can be added to regulate heat in extremely cold environments, while the RAM® Vent-Temp™ uses the vehicle's A/C vents to direct warm or cold air to the ET8x. Go one step further by upgrading to an optional NFC Repeater module that extends the device's internal NFC reader. Combine this with the dock's built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, for mounting the NFC Repeater or another additional device such as a phone, scanner or printer.

€344.61*incl. VAT

€284.80excl. VAT

RAM® powered locking vehicle dock for XCover7 Pro & 6 Pro without case

RAM® powered locking vehicle dock for XCover7 Pro & 6 Pro without case

The RAM® powered locking vehicle dock for XCover7 Pro & 6 Pro (RAM-HOL-V15-SAM84PLU) is a rugged dock that meets and exceeds the demands of modern workflows, with a USB-C connection tested for more than 250,000 cycles. The spring-loaded design of this dock allows quick one-handed insertion or removal of your device, while the precise design of the dock housing minimises human error and damage to the port when docking the device onto the USB-C male connector. The rear cavity of the dock accommodates ergonomic accessories attached to the back of the device. The key lock provides peace of mind and theft prevention in busy environments. An integrated cut-out at the top provides access to the device's top button without removing the device from the dock. Complete the solution by building your holder; this holder is RAM® Compatible™ with a 2-hole AMPS pattern for adding a diamond ball adapter.

€220.76*incl. VAT

€182.45excl. VAT

RAM® Press-N-Lock ball base with 12" long Tube - B size

RAM® Press-N-Lock ball base with 12" long Tube - B size

Take things to a whole new level! If you are tired of the limitations, the new RAM Press-N-Lock™ is what you have been looking for. Whether you want your fishing rod mounted close to the gunwale or your camera high enough to capture all the action, this product is ready to let your imagination run wild. Complete with matching adapters that align the post and eliminate rattle or vibration, it is everything you need and nothing you don't.

€54.47*incl. VAT

€45.02excl. VAT

RAM® Press-N-Lock ball base with 12" long Tube - C size

RAM® Press-N-Lock ball base with 12" long Tube - C size

Take things to a whole new level! If you are tired of the limitations, the new RAM Press-N-Lock™ is what you are looking for. Whether you want your rod mounted tight against the gunwale or your camera high enough to capture all the action, this product is ready to let your imagination run wild. Complete with matching adapters that align the post and eliminate rattle or vibration: it's everything you need and nothing you don't.

€62.85*incl. VAT

€51.94excl. VAT

RAM® Press-N-Lock ball base with 18" long tube - B size

RAM® Press-N-Lock ball base with 18" long tube - B size

Take it to a whole new level! If you're tired of the limitations, the new RAM® Press-N-Lock™ is what you were looking for. Whether you want to mount your rod tight against the gunwale or your camera high enough to capture all the action, this product is ready to let your imagination run free. Complete with locking adapters that align the post and eliminate rattle or vibration, it's everything you need and nothing you don't.

€49.07*incl. VAT

€40.55excl. VAT

RAM® Press-N-Lock ball base with 18" long tube - C size

RAM® Press-N-Lock ball base with 18" long tube - C size

Take things to a whole new level! If you are tired of the limitations, the new RAM Press-N-Lock™ is what you were looking for. Whether you want your rod mounted tight against the gunwale or your camera high enough to capture all the action, this product is ready to let your imagination run wild. Complete with sleek adapters that align the pole and eliminate rattle or vibration, it is everything you need and nothing you don't.

€57.69*incl. VAT

€47.68excl. VAT

RAM® printer holder for Brother RuggedJet RJ-4030 & RJ-4040

RAM® printer holder for Brother RuggedJet RJ-4030 & RJ-4040

The RAM printer holder for the Brother RuggedJet™ 4 is ideally suited to create the optimal mobile office environment, regardless of vehicle or application. Our dimensionally stable design has no sharp edges and adds little to the overall dimensions of the printer. After all, one of the key features of the RuggedJet™ 4 is its size. Why buy a bulky metal holder when RAM has the ideal solution, both low-profile and durable? Multiple mounting options are available for a wide range of mounting configurations. RAM enables mounting of the printer where it is best for you, not where it is best for the holder.

€64.28*incl. VAT

€53.12excl. VAT

RAM® printer holder for Toshiba EP4

RAM® printer holder for Toshiba EP4

The RAM-VPR-105TU consists of dual steel brackets and stainless steel hardware, connected by a spring backbone made of high-strength composite. The spring mechanism allows quick placement and removal of the Toshiba EP4 printer. This is a custom-formed holder in which the side brackets leave access to all of the printer's buttons, display and paper roll. The bottom of the spring backbone features the universal AMPS hole pattern that fits all RAM holders with the same hole pattern.

€421.48*incl. VAT

€348.33excl. VAT

RAM® printer holder with paper feed for Zebra ZQ630 Series

RAM® printer holder with paper feed for Zebra ZQ630 Series

The RAM® printer holder with paper feed for Zebra ZQ630 Series (RAM-PM1-ZE31U) is a rugged, form-fit holder for the Zebra ZQ630 portable printer with an adjustable paper feed. This holder is designed with a quick-release latch for maximum mobility for workers on the go and can be mounted flat or as a peripheral to a RAM® docking solution. Minimise downtime with the integrated paper feed that supports full-size rolls and feeds them directly into the device. It features an attachment point for RAM® hardwire chargers (sold separately) to keep the printer continuously powered and an additional attachment point for peripherals. This holder is not compatible with the extended battery of the Zebra ZQ630 series. It is made of high-strength composite and has a lifetime warranty.

€152.84*incl. VAT

€126.31excl. VAT

RAM® PVC pipe socket with ball - B-size

RAM® PVC pipe socket with ball - B-size

The RAP-B-294U consists of a 1" diameter ball with female PVC slip pipe socket. The socket can be connected to any RAM® PVC pipe and can be permanently attached with insulating tape or PVC glue.

€14.07*incl. VAT

€11.63excl. VAT

RAM® PVC socket to 3/4" PVC pipe adapter

RAM® PVC socket to 3/4" PVC pipe adapter

The RAP-PPA-FRM75 consists of 2 female slip pipe sockets for a 3/4" to 1/2" reducer. The socket can connect to any RAM PVC pipe and can be permanently attached with insulating tape or PVC glue.

€7.61*incl. VAT

€6.29excl. VAT

RAM® PVC to 3/4" PVC pipe adapter

RAM® PVC to 3/4" PVC pipe adapter

The RAP-PPA-MRM75 consists of a male to male slip pipe socket coupling. The socket can connect to any RAM PVC pipe and can be permanently attached with insulating tape or PVC glue.

€6.45*incl. VAT

€5.33excl. VAT

RAM® PVC to 3/4" PVC Pipe Socket Adapter

RAM® PVC to 3/4" PVC Pipe Socket Adapter

The RAM® PVC to 3/4" PVC Pipe Socket Adapter (art. RAP-PPA-FRF75) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The PVC pipe forms the connecting piece in the RAM® socket arm system and bridges the distance between base and holder. This lets you position a device at the desired height or distance, while retaining the strong clamping action of the ball-and-socket principle.Part of the RAM® ball-and-socket mounting systemFor extra reach or positioning of holder and baseOriginal RAM Mounts part.

€7.41*incl. VAT

€6.12excl. VAT

RAM® PVC to 3/4" PVC socket adapter

RAM® PVC to 3/4" PVC socket adapter

The RAP-PPA-MRF75 consists of a male 3/4" to 1/2" male PVC slip tube socket. The socket can connect to any RAM PVC tube and can be permanently attached with insulation tape or PVC glue.

€10.41*incl. VAT

€8.60excl. VAT

RAM® PVC tube adapter with ratchet adjustability

RAM® PVC tube adapter with ratchet adjustability

The RAP-420-424U allows you to connect any two RAM PVC tubes with a ratchet adjustment function. Whether you use press-fit, PVC glue or sheet metal screws, this adapter is the perfect accessory to add extension and adjustability to your Tough-Pole™ action camera mount for boats and kayaks.

€41.10*incl. VAT

€33.97excl. VAT

RAM® PVC tube socket mount with universal action camera adapter

RAM® PVC tube socket mount with universal action camera adapter

Complete your Tough-Pole™ set with this double ball mount to secure your action camera at the perfect shooting angle. The double ball-and-socket technology provides virtually infinite adjustability with a simple twist of a knob, and interchangeable components that let you transfer your camera to any other RAM Mount component. Ideal for mounting any action camera on a boat or kayak.

€41.02*incl. VAT

€33.90excl. VAT

RAM® PVC tube socket with ball - C-size

RAM® PVC tube socket with ball - C-size

The RAP-294U consists of a ball of 1.5" diameter with female PVC slide tube socket. The socket fits any RAM PVC tube and can be permanently attached with insulating tape or PVC tube glue.

€22.92*incl. VAT

€18.94excl. VAT

RAM® PVC tube socket with composite Octagon Button

RAM® PVC tube socket with composite Octagon Button

The RAM® PVC tube socket with composite Octagon Button is a mounting base from the RAM Mounts system.This PVC tube socket with octagonal composite Octagon Button provides an attachment point to connect a tube or holder. Ideal for lightweight, corrosion-resistant mounting in vehicles and material handling.PVC tube socket with composite Octagon ButtonLightweight and corrosion-resistantFor vehicles and material handlingOriginal RAM Mounts part.

€8.58*incl. VAT

€7.09excl. VAT

RAM® PVC tube socket with round base plate

RAM® PVC tube socket with round base plate

The RAP-278U consists of a female PVC slide tube socket and round base plate with AMPS hole pattern. The socket fits any RAM PVC tube and can be permanently attached with insulating tape or PVC tube adhesive.

€15.83*incl. VAT

€13.08excl. VAT

RAM® Qi2 15W wireless charger

RAM® Qi2 15W wireless charger

The RAM® Qi2 15W wireless charger (RAM-GDS-CHARGE-W2M) is built for the toughest conditions, with an IP67 waterproof rating and a durable braided USB-C cord for reliable charging anywhere. Designed for outdoor enthusiasts, travellers and professionals, this rugged MagSafe-compatible charger ensures perfect magnetic alignment with iPhone 12, iPhone 13, iPhone 14, iPhone 15, iPhone 16 and AirPods, delivering fast and safe wireless charging. Whether you are on the road, the trail or the water, stay charged with this waterproof wireless charger, designed for adventure.

€76.96*incl. VAT

€63.60excl. VAT

RAM® Quick Release printer holder for Zebra ZQ310 Series

RAM® Quick Release printer holder for Zebra ZQ310 Series

The RAM® Quick Release holder for Zebra ZQ310 Series (RAM-HOL-ZE28U) is a rugged, form-fit holder for the Zebra ZQ310 portable printer. This holder is designed with a quick-release latch for maximum mobility for workers on the go and can be flat mounted or used as a peripheral device on a RAM® docking solution. This holder is not compatible with the extended battery or battery eliminator accessories of the Zebra ZQ310 series. It is made of high-strength composite and has a lifetime warranty.

€29.68*incl. VAT

€24.53excl. VAT

RAM® Quick Release printer holder for Zebra ZQ320 Series

RAM® Quick Release printer holder for Zebra ZQ320 Series

The RAM® Quick Release holder for Zebra ZQ320 Series (RAM-HOL-ZE27U) is a rugged, form-fit holder for the Zebra ZQ320 portable printer. This holder is designed with a quick-release latch for maximum mobility for workers on the go and can be flat mounted or used as a peripheral device on a RAM® docking solution. This holder is not compatible with the extended battery or battery eliminator accessories of the Zebra ZQ320 series. It is made of high-strength composite and has a lifetime warranty.

€29.96*incl. VAT

€24.76excl. VAT

RAM® Quick Release printer holder for Zebra ZQ511 Series

RAM® Quick Release printer holder for Zebra ZQ511 Series

The RAM® Quick Release holder for Zebra ZQ511 Series (RAM-HOL-ZE29U) is a rugged, form-fit holder for the Zebra ZQ511 portable printer. This holder is designed with a quick-release latch for maximum mobility for workers on the go and can be flat mounted or used as a peripheral device on a RAM® docking solution. This holder is not compatible with the extended battery or battery eliminator accessories of the Zebra ZQ511 series. It is made of high-strength composite and has a lifetime warranty.

€27.76*incl. VAT

€22.94excl. VAT

RAM® Quick Release printer holder for Zebra ZQ521 Series

RAM® Quick Release printer holder for Zebra ZQ521 Series

The RAM® Quick Release holder for Zebra ZQ521 Series (RAM-HOL-ZE30U) is a rugged, form-fit holder for the Zebra ZQ521 portable printer. This holder is designed with a quick-release latch for maximum mobility for workers on the go and can be flat mounted or used as a peripheral device on a RAM® docking solution. This holder is not compatible with the extended battery or battery eliminator accessories of the Zebra ZQ521 series. It is made of high-strength composite and has a lifetime warranty.

€33.94*incl. VAT

€28.05excl. VAT