To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® Quick-Grip™ XL phone holder with Vibe-Safe™ adapter & ball

RAM® Quick-Grip™ XL phone holder with Vibe-Safe™ adapter & ball

The RAM® Quick-Grip™ XL phone holder with RAM® Vibe-Safe™ adapter & ball (RAM-HOL-PD4-462B) is a combination of the RAM® Quick-Grip™ XL phone holder with low-profile small RAM® Tough-Claw™ and the RAM® Vibe-Safe™—our vibration-dampening accessory designed to protect electronic devices against a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and offers the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments. The holder is compatible with handheld devices that fit within the dimensions listed below; it is important to check the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

€114.39*incl. VAT

€94.54excl. VAT

RAM® quick-release 18" arm extension for wheelchairs

RAM® quick-release 18" arm extension for wheelchairs

The RAM® quick-release flex arm extension consists of a 3.73" long B size socket arm, a rigid 18" long aluminium rod and a post adapter that fits the receiver of the RAM® universal wheelchair base. Thanks to the quick-release function on the post, you can quickly insert and remove the mount from the base when needed. The socket arm fits any RAM® cradle with a ball to support your phone, tablet, cup holder or other device. The rigid aluminium rod can be pre-bent into the desired position to set your device at the perfect viewing/operating angle. When the mount is attached to a seat rail, one of the rod forks can be released to create a handy swivel function.

€123.23*incl. VAT

€101.84excl. VAT

RAM® quick-release adapter with ball for OtterBox uniVERSE tablet cases

RAM® quick-release adapter with ball for OtterBox uniVERSE tablet cases

Securely mount your Apple or Samsung tablet with OtterBox uniVERSE case in your vehicle with the RAM® Mounts quick-release vehicle mount adapter. This kit is compatible with a wide range of RAM® vehicle mounts designed for use in fleet vehicles, commercial aviation, forklifts and more. The adapter connects to the back of your uniVERSE case while the included B size quick-release fitting with ball allows you to secure your iPad in the uniVERSE case with any B size RAM® mounting solution.

€49.28*incl. VAT

€40.73excl. VAT

RAM® quick-release ball adapter for Lowrance Elite 5 and 7 Ti and more

RAM® quick-release ball adapter for Lowrance Elite 5 and 7 Ti and more

The RAM adapter base contains a rubber ball with a 1.5" diameter and is inserted directly into the back of the Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti², HOOK-3, HOOK-4, HOOK-5 and MARK-5 fishfinders. The adapter serves as a quick-release mechanism, so you can remove or transfer your fishfinder in seconds.

€28.92*incl. VAT

€23.90excl. VAT

RAM® quick-release ball adapter for Lowrance Elite-4 & Mark-4 Series

RAM® quick-release ball adapter for Lowrance Elite-4 & Mark-4 Series

The RAM-B-202U-LO11 features a 1" diameter rubber ball and plugs directly into the back of Lowrance Elite 4, Mark-4 and Hook-4 fishfinders. The adapter serves as a quick-release mechanism, allowing you to remove or transfer your fishfinder in seconds.

€25.70*incl. VAT

€21.24excl. VAT

RAM® quick-release holder for OtterBox uniVERSE tablet cases

RAM® quick-release holder for OtterBox uniVERSE tablet cases

The RAM® quick-release vehicle mount adapter clips onto the RAM-HOL-OT3BU. Once connected, you can mount any Apple or Samsung tablet with an OtterBox uniVERSE case to any RAM® diamond base with ball via the intersection of the AMPs hole pattern. This lets you use your iPad in its uniVERSE case with a wide selection of RAM® vehicle holders designed for fleets, commercial aviation, forklifts and more.

€17.85*incl. VAT

€14.75excl. VAT

RAM® quick-release rail base without ball

RAM® quick-release rail base without ball

The RAM® quick-release rail base without ball (art. RAP-383-NBU) is an original RAM Mounts mounting part for securely and vibration-free attaching devices.The rail mount attaches with a strap or clamp around a rail or tube and connects via the RAM® ball-and-socket system to a holder. This lets you quickly mount a device on bars and railings without drilling.Attachment around rail or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

€22.48*incl. VAT

€18.58excl. VAT

RAM® quick-release socket arm extension for wheelchair armrests

RAM® quick-release socket arm extension for wheelchair armrests

The RAM® quick-release socket arm extension consists of a 6" long B-size socket arm, a 3.73" long B-size socket arm, a double ball adapter connecting the two arms, and a post-ball adapter that connects to the receiver of the RAM® universal wheelchair base. The quick-release feature on the post lets you quickly insert and remove the holder from the base when needed. These socket arms can be adapted to any RAM® holder with ball for supporting your phone, tablet, cup holder or any other device. To achieve the perfect mounting position for your device, you can use just one of the included socket arms, or connect the two arms together for extra extension.

€121.77*incl. VAT

€100.64excl. VAT

RAM® Quick-Snap™ rubber belt clip

RAM® Quick-Snap™ rubber belt clip

The RAM® Quick-Snap™ rubber belt clip is a universal carrying clip from RAM Mounts.This rubber belt clip with Quick-Snap system lets a device quickly snap on and off the belt, so workers keep their hands free. Ideal for mobile work in material handling and logistics.Quick-Snap™ rubber belt clipQuick snap on and offFor material handling and mobile workOriginal RAM Mounts part.

€14.71*incl. VAT

€12.16excl. VAT

RAM® Quick-Snap™ rubber belt clip for Intermec devices

RAM® Quick-Snap™ rubber belt clip for Intermec devices

The RAM® Quick-Snap™ rubber belt clip for Intermec devices is a carrying clip from RAM Mounts.This rubber belt clip with Quick-Snap system lets an Intermec device snap on and off the belt quickly, keeping workers' hands free. Ideal for mobile work in material handling and logistics.Quick-Snap™ rubber belt clipFor Intermec devicesFor material handling and mobile workOriginal RAM Mounts part.

€18.04*incl. VAT

€14.91excl. VAT

RAM® rail adapter set for round bases

RAM® rail adapter set for round bases

The RAM® rail adapter set for round bases (RAM-233U) is designed to attach a standard RAM® 2.5 inch round ball base to rails with a diameter of 0.75" to 1". It comes with a rubber strip that ensures a firm grip between the adapter and the rail, as well as the necessary hardware for installation. This adapter is made of marine-grade aluminium for rugged reliability in the most extreme conditions.

€46.15*incl. VAT

€38.14excl. VAT

RAM® rail clamp adapter base with ball

RAM® rail clamp adapter base with ball

The RAM-219U-MOD is the upper half of the RAM-219U. This part can replace the lower half of that holder to create a double ball clamp base for rails with a diameter of 1" to 1.25".

€68.34*incl. VAT

€56.48excl. VAT

RAM® rail clamp ball base for 1.25" - 1.875" rails - D size

RAM® rail clamp ball base for 1.25" - 1.875" rails - D size

The RAM-D-271U-12, round tube base, consists of a 2.25" rubber ball and fits tubes with a diameter of 1.25" to 1.875".

€92.20*incl. VAT

€76.20excl. VAT

RAM® rail clamp ball base for 1.25" rails

RAM® rail clamp ball base for 1.25" rails

The RAM-219U is a ball with a 1.5" diameter that can be clamped onto a round rail with a diameter of 1" to 1.25".

€80.38*incl. VAT

€66.43excl. VAT

RAM® rail clamp ball base for 2" - 2.5" rails - D size

RAM® rail clamp ball base for 2" - 2.5" rails - D size

The RAM-D-271U-2, round tube base, consists of a 2.25" rubber ball and fits tubes with a diameter of 2" to 2.5".

€141.63*incl. VAT

€117.05excl. VAT

RAM® rail clamp double ball base for 1.25" rails

RAM® rail clamp double ball base for 1.25" rails

The RAM® rail clamp double ball base for 1.25" rails (art. RAM-219-US1U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.This clamp or U-bolt base clamps around a bar, handlebar or rail and provides a solid ball mounting point, without the need for drilling.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-219-US1UOriginal RAM® Mounts part.

€153.16*incl. VAT

€126.58excl. VAT

RAM® rail clamp double ball base for rails from 2" - 2.5"

RAM® rail clamp double ball base for rails from 2" - 2.5"

This double-ball rail base is suitable for rails from 2" to 2.5" diameter. With two 1.5" diameter C size ball adapters you can attach two C size socket arms to mount multiple devices from a single base. This reduces the need for multiple mounting points for a multi-device mounting system; ideal for forklift mounting with minimal available space.

€140.55*incl. VAT

€116.16excl. VAT

RAM® Rare Earth magnets 2-pack

RAM® Rare Earth magnets 2-pack

The RAM® Rare Earth magnets form a set of two strong magnets for RAM® Handi-Case holders.These magnets provide a magnetic closure or attachment within the Handi-Case system, so a device clicks smoothly into place and stays put. Handy when using device holders in vehicles and material handling.Set of 2 Rare Earth magnetsFor RAM® Handi-Case holdersFor vehicles and material handlingOriginal RAM Mounts part.

€19.59*incl. VAT

€16.19excl. VAT

RAM® Ratchet adapter with 1" NPT post

RAM® Ratchet adapter with 1" NPT post

The RAM® Ratchet adapter with 1" NPT post (art. RAM-D-162PU) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-162PUOriginal RAM® Mounts part.

€122.62*incl. VAT

€101.34excl. VAT

RAM® ratchet adapter with ball

RAM® ratchet adapter with ball

The RAM® ratchet adapter with ball (art. RAM-162BU) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-162BUOriginal RAM® Mounts part.

€75.41*incl. VAT

€62.32excl. VAT

RAM® ratchet adapter with single socket arm

RAM® ratchet adapter with single socket arm

The RAM® ratchet adapter with single socket arm (art. RAM-162BAU) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.With Ratchet™ locking for extra stabilityFor vehicles, forklifts and material handlingAlso known under reference: RAM-162BAUOriginal RAM® Mounts part.

€52.94*incl. VAT

€43.75excl. VAT

RAM® ratchet and swing arm with 1/2" NPT opening and single socket arm

RAM® ratchet and swing arm with 1/2" NPT opening and single socket arm

The RAM-261-ADJU is a swing arm with a ratchet adjustment in the middle, a 1/2" NPT opening on one side and a socket for a 1.5" diameter C size ball on the other.

€159.59*incl. VAT

€131.89excl. VAT

RAM® Ratchet Arm™ with open socket

RAM® Ratchet Arm™ with open socket

The RAM® Ratchet Arm™ with open socket is an adjustable mounting arm from RAM Mounts.This Ratchet Arm with open socket lets a holder tilt and snap into fixed positions, so the position is firmly retained. Ideal for placing a holder at a chosen angle in vehicles and material handling.Ratchet Arm™ with open socketTilt and snap into positionsFor vehicles and material handlingOriginal RAM Mounts part.

€35.51*incl. VAT

€29.35excl. VAT

RAM® Ratchet horizontal base with ball - D size

RAM® Ratchet horizontal base with ball - D size

The RAM® Ratchet horizontal base with ball - D size (art. RAM-D-162H-MC4) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in harsh environments such as forklifts and off-road vehicles.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-162H-MC4Original RAM® Mounts part.

€600.14*incl. VAT

€495.98excl. VAT