To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® round plate with ball & #6-32 mounting hardware for Garmin GPSMAP + more

RAM® round plate with ball & #6-32 mounting hardware for Garmin GPSMAP + more

The RAM-B-202-G2U consists of a 1" diameter rubber ball connected to a 2.5" diameter flat base. This mount has a three-hole pattern that fits the pivot mounts of the Garmin Marine GPS unit. A hardware set is included for mounting your Garmin fishfinder.

€22.47*incl. VAT

€18.57excl. VAT

RAM® round plate with ball & mounting hardware for Garmin GPSMAP + more

RAM® round plate with ball & mounting hardware for Garmin GPSMAP + more

The RAM-B-202-G1U consists of a 1" diameter rubber ball connected to a round base of 2.5" diameter. This holder has pre-drilled holes, including the universal AMPS hole pattern. The supplied hardware is compatible with Garmin GPSMAP 172-250 devices.

€25.43*incl. VAT

€21.02excl. VAT

RAM® round plate with ball & mounting hardware for Garmin StreetPilot

RAM® round plate with ball & mounting hardware for Garmin StreetPilot

The RAM-B-202-G3 consists of a 1" diameter rubber ball connected to a flat base of 2.5" diameter and the hardware needed to bolt the round plate to a Garmin StreetPilot 7200 or StreetPilot 7500.

€23.68*incl. VAT

€19.57excl. VAT

RAM® round plate with ball & mounting hardware for Garmin Striker + more

RAM® round plate with ball & mounting hardware for Garmin Striker + more

The RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat base of 2.5" diameter. This holder has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8” PH PD machine screws) and 3x (#8-32 SS Nylock nuts) that connect the RAM-202-G4U to the bottom of the Garmin echo™ and Striker™ 4 Series.

€22.30*incl. VAT

€18.43excl. VAT

RAM® round plate with ball and 5/16"-18 threaded hole

RAM® round plate with ball and 5/16"-18 threaded hole

The RAM-202U-MT1 consists of a rubber ball with a 1.5" diameter connected to a flat base with a 2.5" diameter with 0.31-18 female thread. This holder has pre-drilled holes, including the universal AMPS hole pattern.

€32.32*incl. VAT

€26.71excl. VAT

RAM® round plate with ball and steel-reinforced bolt

RAM® round plate with ball and steel-reinforced bolt

The RAM-202U-IN1 consists of a 1.5" diameter rubber ball connected to a steel-reinforced post and a 2.5" diameter flat base. This mount has pre-drilled holes, including the universal AMPS hole pattern.

€37.10*incl. VAT

€30.66excl. VAT

RAM® round platform base with AMPS hole pattern

RAM® round platform base with AMPS hole pattern

The RAM® round platform base with AMPS hole pattern is a mounting base from the RAM Mounts system.This round platform base with AMPS hole pattern provides a firm, standardised attachment point to connect a holder or ball. Ideal for mounting in vehicles and material handling.Round platform baseWith AMPS hole patternFor vehicles and material handlingOriginal RAM Mounts part.

€50.99*incl. VAT

€42.14excl. VAT

RAM® rubber adhesive strip 7.5" X 2"

RAM® rubber adhesive strip 7.5" X 2"

The RAM-102AU is a 7.5" x 2" rubber strip.

€10.08*incl. VAT

€8.33excl. VAT

RAM® rubber double suction cup base

RAM® rubber double suction cup base

The RAM® rubber double suction cup base is a mounting base from RAM Mounts.This rubber base with two suction cups adheres firmly to a smooth surface and provides a drill-free mounting point for a holder. Ideal for temporary or relocatable mounting on windows and smooth panels in vehicles.Rubber double suction cup baseDrill-free mounting on smooth surfaceFor vehicles and material handlingOriginal RAM Mounts part.

€13.83*incl. VAT

€11.43excl. VAT

RAM® Rugged quick-release wheelchair 2-point base with ball

RAM® Rugged quick-release wheelchair 2-point base with ball

The RAM® Rugged quick-release wheelchair 2-point base with ball is the first product in our new User-Inspired Kits collection. Developed in collaboration with Ian Mackay, a Guinness World Record holder and long-time friend of RAM®, this ultra-stable mounting system includes two RAM® Adapt-A-Post™ receivers and a 30" flexible rod that connects to both armrests or seat rails of the wheelchair and can then be configured in any position. When connected, both ends of the 30" rod support the armrests, keeping the entire mounting system stable and ultra-rugged for on-the-go use, while offering an intuitive quick-release feature. Whether you want to mount a single tablet front and centre or a combination of devices, this is the ideal solution for comfortable viewing.

€227.60*incl. VAT

€188.10excl. VAT

RAM® Saddle Strap Ball Base for Lanterns and Large Poles

RAM® Saddle Strap Ball Base for Lanterns and Large Poles

The RAM-118BU offers a C-Size ball that can be semi-permanently strapped to any existing pole between 4" and 5.5" in diameter.

€57.81*incl. VAT

€47.78excl. VAT

RAM® Safe-N-Secure™ lock knob set for swing arms and RAM® Tele-Pole™

RAM® Safe-N-Secure™ lock knob set for swing arms and RAM® Tele-Pole™

Until now, locking features on universal laptop mounts were difficult to use or simply got in the way when typing. RAM has made all that a memory with the new RAM SAFE-N-SECURE™ locking feature. Buy your laptop mounting system with this option, add it later or integrate it into your existing system. Whatever you choose, you have one of the best available anti-theft means to keep your laptop where it belongs, with you. This system with keyed lock knobs works simply and takes nothing away from the overall versatility you have come to love in your RAM Laptop Mount. With the three lock knobs you can disconnect the tightening of the swing arm knobs on top of the Tele-Pole, the swing arm connection and the laptop tray connection.

€111.97*incl. VAT

€92.54excl. VAT

RAM® Safe-N-Secure™ lock set for RAM® Tough-Tray™

RAM® Safe-N-Secure™ lock set for RAM® Tough-Tray™

The RAM-234-LK2, Safe-n-Secure lock knob set, is designed to secure and protect the RAM-234-3 Tough-Tray™. The set includes a lock knob and hardware and turns the RAM Tough-Tray™ into a lockable system.

€83.31*incl. VAT

€68.85excl. VAT

RAM® Safe-N-Secure™ lock set for RAM® Tough-Tray™ and swing arms

RAM® Safe-N-Secure™ lock set for RAM® Tough-Tray™ and swing arms

Until now, locking features on universal laptop mounts were difficult to use or simply got in the way when typing. RAM has made all that a memory with the new RAM SAFE-N-SECURE™ locking feature. Buy your laptop mounting system with this option, add it later or integrate it into your existing system. Whatever you choose, you have one of the best available anti-theft means to keep your laptop where it belongs, with you. This system with keyed lock knobs works simply and takes nothing away from the overall versatility you have come to love in your RAM Laptop Mount. With the four lock knobs you can disconnect the tightening of the swing arm knobs on top of the Tele-Pole, the swing arm connection and the laptop tray connection.

€189.59*incl. VAT

€156.69excl. VAT

RAM® Safe-T-Charge™ battery protection system

RAM® Safe-T-Charge™ battery protection system

The RAM® Safe-T-Charge™ battery protection system is a smart, configurable voltage monitoring solution designed to protect vehicle and equipment batteries from excessive discharge. Ideal for commercial fleets, material handling equipment and even off-grid consumer setups, it automatically switches off power to connected devices based on the ignition status or voltage thresholds—so essential electronics such as tablets, routers, GPS devices and other small electronics stay powered as needed without jeopardizing the engine's starting capacity. With adjustable delay intervals, audible warnings, override options and a rugged waterproof design, this compact unit enables safer and more reliable management of accessory power in both business and adventure environments.

€121.80*incl. VAT

€100.66excl. VAT

RAM® screen magnifier for handheld devices

RAM® screen magnifier for handheld devices

With the RAM magnifier you don't have to lean closer or squint to see where you are or where you are going. The magnifier is 2" x 4" with 2x zoom. The RAM magnifier adapter installs quickly between the RAM diamond mounting base and the device holder. The magnifying lens can be set at various angles for a wide range of GPS devices, resulting in a more readable screen. The RAM-MAG-1 is compatible with all RAM diamond bases that have the universal AMPS 2-hole pattern.

€68.17*incl. VAT

€56.34excl. VAT

RAM® screen protector for Samsung Tab Active5 & 3

RAM® screen protector for Samsung Tab Active5 & 3

The RAM® screen protector for Samsung Tab Active5 & 3 (RAP-SKIN-SP-4) is a custom-made tempered glass screen protector that pairs seamlessly with any IntelliSkin®, RAM® Skin™ or OEM case. Designed for rugged environments, this screen protector provides shatter- and scratch-resistant protection to keep your device safe in demanding field conditions. With a 2.5D edge profile for a smoother tactile experience, the high-definition glass ensures crystal-clear clarity without compromising touch sensitivity. The ultra-responsive surface retains full touchscreen compatibility. Installation is quick and bubble-free, making it easy to give your device long-lasting protection. Combined with IntelliSkin®, this screen protector offers enterprise-grade protection for professionals who rely on their devices in the field.

€22.30*incl. VAT

€18.43excl. VAT

RAM® Seat-Mate™ base

RAM® Seat-Mate™ base

Compact, portable, amazingly strong and no tools required are the words that best describe the new RAM Seat-Mate™. This holder can turn virtually any passenger seat into a workstation: simply take the holder out of the compact bag, unfold the legs and buckle it in place. With a truly innovative design, this product can actively hold onto the seat and stabilize itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect. Designed to fit easily into a travel bag, case or even under a vehicle seat, RAM makes it possible to create a comfortable workspace in minutes, wherever your work takes you. The RAM Seat-Mate™ is perfect for laptops, tablets and UMPCs. The integrated rubber ball-and-socket system lets the user achieve ergonomic viewing and typing angles. If you are a mobile professional, this product is designed for you.

€166.01*incl. VAT

€137.20excl. VAT

RAM® Seat-Mate™ base without bag

RAM® Seat-Mate™ base without bag

Compact, portable, amazingly strong and requiring no tools are the words that best describe the new RAM Seat-Mate™. This holder can turn virtually any passenger seat into a workstation: fold out the legs and buckle it in. With a truly innovative design, this product can actively hold onto the seat and stabilise itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect. Designed to fit easily into a travel bag, case or even under a vehicle seat, RAM makes it possible to create a comfortable workspace in minutes, wherever your work takes you. The RAM Seat-Mate™ is perfect for laptops, tablets and UMPCs. The integrated rubber ball-and-socket system lets the user achieve ergonomic viewing and typing angles. If you are a mobile professional, this product is designed for you.

€98.91*incl. VAT

€81.74excl. VAT

RAM® seat-rail mount with 1/2" NPT threaded tube

RAM® seat-rail mount with 1/2" NPT threaded tube

The RAM® seat-rail mount with 1/2" NPT threaded tube (art. RAM-160BU) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The base is fixed to the seat rail and provides a sturdy anchoring point for building up a RAM® ball-and-socket mount in the cockpit or cabin.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-160BUOriginal RAM® Mounts part.

€427.66*incl. VAT

€353.44excl. VAT

RAM® Secure-N-Motion™ laptop tray security kit

RAM® Secure-N-Motion™ laptop tray security kit

Until now, security features on laptop mounts were difficult to use or simply got in the way of productivity. RAM has made that all a memory with the Secure-n-Motion™ security package. You can purchase your laptop mounting system with this option or acquire it at a later time; this package integrates easily into an existing system. Whichever option you choose, you have the peace of mind that your laptop stays in place, even under the most adverse conditions. With a keyed locking knob and slim mounting arms, operation is simple, easy and extremely secure. As the perfect complement to your RAM Laptop Mounting System, we recommend you consider this security package.

€110.78*incl. VAT

€91.55excl. VAT

RAM® Secure-N-Motion™ with RAM® Pin-Lock™ security kit

RAM® Secure-N-Motion™ with RAM® Pin-Lock™ security kit

The RAM-234-SKNMU includes a Pin-Lock™ security knob/key and flat side holders for the RAM Tough-Tray™. The RAM-234-SKNMU provides the ideal amount of leverage to tighten your holder correctly and thus prevent slipping in environments with extreme vibration. With an emphasis on aesthetics and function, the supplied Pin-Lock™ security knob is low profile and adds only a small amount of extra bulk to your system compared with the supplied standard knob. For a fraction of the cost of the keyed locking knobs currently available, the added peace of mind and tamper resistance comes at a very affordable price. The supplied flat side holders allow your laptop to close completely while it is in the RAM Tough-Tray™.

€82.59*incl. VAT

€68.26excl. VAT

RAM® self-adhesive Flex ball base

RAM® self-adhesive Flex ball base

The RAP-B-378U consists of a 2.5" composite B size ball base, double-sided self-adhesive PSA strip and a sealed alcohol cleaning wipe. This base attaches to all RAM® B size double socket arms, allowing you to connect a compatible device holder.

€25.10*incl. VAT

€20.74excl. VAT

RAM® set of 2 steel rectangular adhesive plates for RAM® Power-Plate™

RAM® set of 2 steel rectangular adhesive plates for RAM® Power-Plate™

The RAM® set of 2 steel rectangular adhesive plates for RAM® Power-Plate™ forms a mounting kit for the RAM® Power-Plate system.These steel rectangular adhesive plates provide a magnetic or adhesive mounting surface for the Power-Plate system, allowing you to easily secure a device. Ideal for mounting in vehicles and material handling.Set of 2 steel rectangular adhesive platesFor the RAM® Power-Plate™ systemFor vehicles and material handlingOriginal RAM Mounts part.

€9.38*incl. VAT

€7.75excl. VAT