Montagecomponenten
2497 products found
RAM® Tough-Case™ for Tab Active Pro and Active5 Pro & 4 Pro – USB-C male
This RAM® Tough-Case™ (RAM-TC-SAM54CU) is a rugged two-part enclosure that supports No Battery Mode for the Samsung Galaxy Tab Active5 & 4 Pro by using a built-in coiled USB Type-C power cable that connects the device to a charging port inside the cab of any vehicle. This case lets you make a fixed wired connection to the tablet using a custom USB Type-C connector, with a stretch of up to 4 ft that offers maximum tablet mobility while staying connected. Your connection remains secured and protected thanks to the generously sized strain relief built into the RAM® Tough-Case™. The back of the case has been deliberately left fully open to optimise cooling of the tablet's battery or to remove it entirely without taking the case apart.
€170.34*incl. VAT
€140.78excl. VAT
RAM® Tough-Case™ Holder for Samsung Tab Active5 & 3 + more
This RAM® EZ-Roll'r™ holder is specifically designed to support the Samsung Galaxy Tab Active5, Tab Active3 and 2 with the RAM® Tough-Case™. Thanks to the patented RAM® EZ-Roll'r™ design, you can easily place the tablet into the holder while it remains securely in place on the go. This holder comes with a compartment on the back that accommodates a cooling fan to prevent the tablet from overheating during prolonged use or in high-temperature environments. Optional attachment points are integrated into the holder for additional strain relief of the RAM® Tough-Case™ coiled cable. Get the Heat Out!™ with RAM® Tough-Case™.
€37.40*incl. VAT
€30.91excl. VAT
RAM® Tough-Case™ Holder for Samsung Tab Active5 Pro & 4 Pro
This RAM® EZ-Roll'r™ holder is specifically designed to support various Samsung 10" Galaxy tablets with the RAM® Tough-Case™, including the Tab Active5 Pro, 4 Pro, Tab A 10.1 SM-T510, Tab A7 10.4 SM-T500 and Tab S6 LITE 10.4 SM-P615. Thanks to the patented RAM® EZ-Roll'r™ design, you can easily place the tablet into the holder while it remains securely in place on the go. This holder comes with a compartment on the back that accommodates a cooling fan to prevent the tablet from overheating during prolonged use or in high-temperature environments. Optional attachment points are integrated into the holder for additional strain relief of the RAM® Tough-Case™ coiled cable. Get the Heat Out!™ with RAM® Tough-Case™.
€39.48*incl. VAT
€32.63excl. VAT
RAM® Tough-Case™ holder with fan for Samsung Tab Active5 & 3 + more
This RAM® EZ-Roll'r™ holder is specifically designed to support the Samsung Galaxy Tab Active5, Tab Active3, 2 and any Samsung 8" tablet with the RAM® Tough-Case™. Thanks to the patented RAM® EZ-Roll'r™ design, you can easily insert the tablet into the holder while it stays securely in place on the go. This holder comes with a built-in cooling fan to prevent the tablet from overheating during prolonged use. Optional mounting points are integrated into the holder for additional strain relief of the RAM® Tough-Case™ coiled cable. Get the Heat Out!™ with RAM® Tough-Case™.
€108.73*incl. VAT
€89.86excl. VAT
RAM® Tough-Case™ Holder with fan for Tab Active5 Pro & 4 Pro
This RAM® EZ-Roll'r™ holder is specifically designed to support various Samsung 10" Galaxy tablets with the RAM® Tough-Case™, including the Tab Active5 Pro, 4 Pro, Tab A 10.1 SM-T510, Tab A7 10.4 SM-T500 and Tab S6 LITE 10.4 SM-P615. Thanks to the patented RAM® EZ-Roll'r™ design, you can easily place the tablet into the holder while it remains securely in place on the go. This holder comes with a built-in cooling fan to prevent the tablet from overheating during prolonged use. Optional attachment points are integrated into the holder for additional strain relief of the RAM® Tough-Case™ coiled cable. Get the Heat Out!™ with RAM® Tough-Case™.
€112.64*incl. VAT
€93.09excl. VAT
RAM® Tough-Case™ with USB Type-C for Samsung Tab Active5 & 3
The RAM® Tough-Case™ is a rugged two-piece housing for the Samsung Galaxy Tab Active5, Tab Active3 and 2, with a built-in coiled power cable that holds the device in any vehicle. This case lets you make a fixed connection to the tablet via a dedicated USB Type-C connector, with a stretch of up to 4 ft that offers maximum tablet mobility while staying connected. Your connection stays safe and protected thanks to the generously sized strain relief built into the RAM® Tough-Case™. The back of the case is deliberately left fully open to optimize cooling of the tablet's battery. Combined with a Power Delivery (PD) charger, this RAM® Tough-Case™ can provide the ability to power your tablet without using a battery. Get the Heat Out!™ with the RAM® Tough-Case™.
€171.29*incl. VAT
€141.56excl. VAT
RAM® Tough-Case™ with USB-A for Samsung Tab Active5 & 3 + more
The RAM® Tough-Case™ is a rugged two-part housing for the Samsung Galaxy Tab Active5, Tab Active3 and 2, with a built-in coiled power cable that holds the device in any vehicle. With this case you can make a fixed connection to the tablet via a dedicated USB Type-C connector, with a stretch up to 7 ft that provides maximum tablet mobility while staying connected. Your connection stays safe and protected thanks to the generously sized strain relief built into the RAM® Tough-Case™. The back of the case has been deliberately left fully open to optimise the cooling of the tablet's battery. Get the Heat Out!™ with the RAM® Tough-Case™.
€147.98*incl. VAT
€122.30excl. VAT
RAM® Tough-Charge™ 15W waterproof wireless charging holder with charger
The RAM® Tough-Charge™ 15W waterproof wireless charging holder with charger (RAM-HOL-UN12WB-V7M-1) is the world's first patented, waterproof, universal wireless charging holder for phones—built to withstand rugged environments while keeping your device charged and accessible. With the spring-loaded RAM® X-Grip® design, the holder's signature 'X' arms expand and contract to firmly hold virtually any smartphone while delivering reliable Qi wireless charging. Rubber-coated end caps on all four arms grip your device firmly, and the open-frame design keeps side buttons and ports unobstructed. To insert your phone, simply squeeze one side of the holder, place your device and release. This waterproof Qi charging holder delivers consistent charging in virtually any orientation. For extra confidence during aggressive driving or outdoor use, a device tether is included. A removable and adjustable support leg provides added stability. The connected Type-A male pigtail has an in-line power switch to turn the charging module on or off as needed. For in-vehicle setups, simply connect the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit also includes a hardwire charger for direct power integration. For open-cockpit applications (e.g. motorcycles, ATVs, boats, etc.) apply silicone grease to the USB Type-A male & female connector to protect the connections and prevent corrosion. Failure to do so voids the warranty.
€268.35*incl. VAT
€221.78excl. VAT
RAM® Tough-Charge™ with X-Grip® 15W waterproof wireless charging holder
The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging holder for phones. Designed with spring-loaded RAM® X-Grip® Technology, this holder has an 'X' design that expands and contracts to secure virtually any phone while you benefit from Qi-compatible wireless charging of your phone. All four arms have rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches on the sides of phones accessible. To insert your device, simply squeeze the arms on one side of the holder and place your phone in before releasing the arms. This Qi-compatible wireless charging holder ensures your compatible phone charges regardless of the position in which it is placed. For extra security and peace of mind, a device tether is included that is recommended for outdoor use. In addition, a support leg can be adjusted to the ideal position or removed entirely. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for vehicles includes a B-size diamond base with a 1" rubber ball – perfect for attaching to the B-size RAM® double socket arm of your choice. The connected Type-A male pigtail connector has an in-line switch that lets you turn off the wireless charging module when not in use. For in-vehicle charging, connect the pigtail to the included 1.2m Type-A male to Type-A female extension cable.
€204.36*incl. VAT
€168.89excl. VAT
RAM® Tough-Clamp™ large base with ball
The RAM Tough-Clamp™ includes a 1" ball with which you can mount a large number of products thanks to RAM's extensive range of mounting solutions. Attach your GoPro camera, smartphone, RAM AQUA BOX® Pro or similar light device to virtually any flat surface and square rails.
€45.36*incl. VAT
€37.49excl. VAT
RAM® Tough-Clamp™ large base with double socket arm
The RAP-B-397-2-201U consists of the RAM® Tough-Clamp™ clamp base and a STANDARD length double socket arm compatible with 1" balls. The RAM® Tough-Clamp™ includes a 1" ball that can be used to mount a variety of products using RAM®'s extensive range of mounting solutions. Attach your GoPro camera, smartphone, RAM® AQUA BOX® Pro or similar lightweight device to virtually any flat surface and square rails.
€60.60*incl. VAT
€50.08excl. VAT
RAM® Tough-Clamp™ small base with ball
The RAM Tough-Clamp™ includes a 1" ball that lets you mount a wide range of products thanks to RAM's extensive range of mounting solutions. Attach your GoPro camera, smartphone, RAM AQUA BOX® Pro or similar lightweight device on virtually any flat surface and square rails.
€35.88*incl. VAT
€29.65excl. VAT
RAM® Tough-Clamp™ small base with double socket arm
The RAP-B-397-1-201U consists of the RAM Tough-Clamp™ clamp base and a 1" ball compatible STANDARD length double socket arm. The RAM Tough-Clamp™ includes a 1" ball with which you can mount a large number of products thanks to RAM's extensive range of mounting solutions. Attach your GoPro camera, smartphone, RAM AQUA BOX® Pro or similar light device to virtually any flat surface and square rails.
€51.17*incl. VAT
€42.29excl. VAT
RAM® Tough-Claw® with RAM® Flex-Rod™ 26" extension arm for wheelchairs
This kit includes a small RAM® Tough-Claw™ clamp base connected to an 18” RAM® Flex-Rod™ and medium double socket arm. The RAM® Tough-Claw™ can be clamped onto rails with a diameter of 0.625" - 1.14". Designed for use with popular wheelchair brands; clamp the RAM® Tough-Claw™ in place and combine with your preferred B-size mount.
€144.66*incl. VAT
€119.55excl. VAT
RAM® Tough-Claw™ ball adapter
The RAP-351-2U consists of a 1.5" ball with a screw for connection to all Tough-Claw™ components. Ideal for upgrading your Tough-Claw from the smaller 1" ball; this component enables your Tough-Claw system to carry more weight and makes it more suitable for rugged environments.
€22.82*incl. VAT
€18.86excl. VAT
RAM® Tough-Claw™ large clamp ball base
The RAM® Tough-Claw™ is the perfect mounting base for tool-free installation and removal on round, square and irregularly shaped rails and bars. The large version of the RAM® Tough-Claw™ can be quickly clamped onto rails with an outer diameter of 1" to 2.2" and is ideal for mounting phones, tablets, action cameras, rod holders and much more in a wide range of applications. Perfectly suited for mounting on an aircraft yoke, bicycle and motorcycle handlebars, or even on kayak rails and roll bars; the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.
€106.32*incl. VAT
€87.87excl. VAT
RAM® Tough-Claw™ large clamp base with ball
The RAM® Tough-Claw™ is the perfect mounting base for tool-free installation and removal on round, square and irregularly shaped rails and tubes. The large version of the RAM® Tough-Claw™ can be quickly clamped onto rails with an outside diameter of 1" to 2.2" and is ideal for mounting phones, tablets, action cameras, rod holders and much more in a wide range of applications. Perfectly suited for mounting on the control column of an aircraft, the handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.
€97.02*incl. VAT
€80.18excl. VAT
RAM® Tough-Claw™ large lockable clamp base with ball
The RAM lockable Tough-Claw™ is the perfect mounting base for quick and easy installation and removal without tools on round, square and irregularly shaped rails and tubes. The Tough-Claw™ can be clamped onto rails within the clamping range in outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders and much more in virtually any environment, the Tough-Claw™ is a versatile solution when a bit more grip is required. Perfectly suited for mounting on an aircraft's control column, the handlebars and seat posts of bikes, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The locking knob includes a 1/4"-20 thread and lets you disengage the threading of the knob. Once you've set your Tough-Claw™ in the desired location, you can lock it in place for peace of mind and protection against tampering.
€162.31*incl. VAT
€134.14excl. VAT
RAM® Tough-Claw™ locking large clamp ball base
The RAM locking Tough-Claw™ is the perfect mounting base for quick and easy installation and removal on round, square and irregularly shaped rails and bars. The Tough-Claw™ can be clamped onto rails with the indicated clamping range in outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders and much more in virtually any environment, the Tough-Claw™ is a versatile solution when a bit more grip is required. The 1.5” ball supports larger devices and offers more mounting flexibility. Perfectly suited for mounting on an aircraft yoke, bicycle handlebars and seat posts, kayak rails, roll bars and much more; the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The locking knob features a 1/4”-20 thread and allows you to disable the screwing of the knob. Once you have set your Tough-Claw™ to the desired location, you can lock it in place for peace of mind and protection against tampering.
€169.58*incl. VAT
€140.15excl. VAT
RAM® Tough-Claw™ medium clamp base with double socket arm
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-free installation and removal on round, square and irregularly shaped rails and tubes. The Tough-Claw™ can be clamped onto rails with an outer diameter of 1" to 1.6". Ideal for mounting tablets, action cameras, smartphones, rod holders for fishing rod storage and much more across a wide range of applications. Perfectly suited for mounting on the control column of an aircraft, the handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
€85.46*incl. VAT
€70.63excl. VAT
RAM® Tough-Claw™ small clamp ball base
The RAM® Tough-Claw™ small clamp ball base (RAP-400U) is a highly versatile mounting solution with quick, tool-free installation. It securely attaches to a wide range of rail shapes (round, square or irregular) with an outer diameter of 0.625" to 1.5". This base makes it easy to mount tablets, action cameras, smartphones, rod holders and more in countless applications – perfect for anything you want to quickly attach or remove while switching between vehicles. Thanks to the portable design, you effortlessly move it from an aircraft yoke to a motorcycle handlebar or seat post, kayak rails, roll bars and more.
€67.99*incl. VAT
€56.19excl. VAT
RAM® Tough-Claw™ small clamp ball base for B size & C size
The RAM Tough-Claw™ is the perfect mounting base for quick and easy installation and removal without tools on round, square and irregularly shaped rails and tubes. The Tough-Claw™ can be clamped onto rails with an outer diameter of 0.625" - 1.14". Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide range of applications. Perfectly suited for mounting on an aircraft's control column, the handlebars and seat posts of bikes, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
€75.88*incl. VAT
€62.71excl. VAT
RAM® Tough-Claw™ small clamp base with ball
The RAM Tough-Claw™ small clamp base (RAP-B-400U) offers tool-free installation and removal on round, square and irregularly shaped rails and tubes. The Tough-Claw™ locks with a twist of the knob and attaches to rails with an outer diameter of 0.625"-1.5" and to flat surfaces with a thickness of 0"-1.14". Integrated rubber pads inside the clamp help protect mounting surfaces, minimise scratches and damage and improve grip for added stability. This base is ideal for mounting phones, action cameras, small tablets and rod holders for rod storage. Popular mounting locations include aircraft control columns, bike handlebars and seat posts, kayak rails and roll bars.
€58.65*incl. VAT
€48.47excl. VAT
RAM® Tough-Claw™ small clamp base with double socket arm - medium
The RAM Tough-Claw™ is the perfect mounting base for quick and easy installation and removal without tools on round, square and irregularly shaped rails and tubes. The Tough-Claw™ can be clamped onto rails with an outer diameter of 0.625" - 1.14". Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide range of applications. Perfectly suited for mounting on an aircraft's control column, the handlebars and seat posts of bikes, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
€75.10*incl. VAT
€62.07excl. VAT