Montagecomponenten
2497 products found
RAM® Tough-Claw™ small clamp base with double socket arm - short
The RAM® Tough-Claw™ small clamp base with double socket arm - short (art. RAP-B-400-201-AU) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The clamp holder clamps around a tube, rail or edge and provides a firm base for a device via the RAM® ball-and-socket system. Quick to (dis)assemble without tools or drilling.Clamp mounting without drillingPart of the RAM® ball-and-socket systemOriginal RAM Mounts part.
€72.81*incl. VAT
€60.17excl. VAT
RAM® Tough-Claw™ small clamp base with RAM® Pin-Lock™ pattern
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-free installation and removal on round, square and irregularly shaped rails and bars. The Tough-Claw™ can be clamped onto rails of 0.625" - 1.14" outer diameter. This configuration comes with a #10-24 nut in the claw so you can bolt everything you need directly onto the claw to create a holder. Perfectly suited for mounting on an aircraft yoke, bicycle handlebars and seat posts, kayak rails, roll bars and much more; the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
€45.96*incl. VAT
€37.98excl. VAT
RAM® Tough-Claw™ small clamp base with Vibe-Safe™ adapter
The RAM® Tough-Claw™ small clamp base with RAM® Vibe-Safe™ adapter (RAP-400-462NPT) is a combination of the small RAM® Tough-Claw™ base and the RAM® Vibe-Safe™ — our vibration-dampening accessory designed to protect electronic devices against a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and offers the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments. The RAM® Tough-Claw™ base attaches firmly onto round, square and irregularly shaped rails and bars with an outer diameter of .625" to 1.14". This low-profile base is compatible with most RAM® holders with 2 holes, including the RAM® Quick-Grip™, RAM® Tough-Charge™, RAM® Quick-Charge™ and RAM® Form-Fit holders.
€111.55*incl. VAT
€92.19excl. VAT
RAM® Tough-Claw™ small clamp mount with double socket arm
The RAM® Tough-Claw™ small clamp mount with double socket arm (art. RAM-B-400-201-AU) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The clamp grips around a tube, edge or bar and forms a movable mounting point in the RAM® system, quickly attached without tools or drilling.Clamp mount without drillingFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-400-201-AUOriginal RAM® Mounts part.
€85.47*incl. VAT
€70.64excl. VAT
RAM® Tough-Cleat™ anchor tie-off with rail adapter
The RAM® Tough-Cleat™ anchor tie-off with rail adapter (art. RAP-432U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The rail mount attaches with a strap or clamp around a rail or tube and connects to a holder via the RAM® ball-and-socket system. This lets you mount a device quickly onto bars and railings without drilling.Attachment around rail or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.
€20.93*incl. VAT
€17.30excl. VAT
RAM® Tough-Dock™ for Panasonic Toughbook CF-52
RAM Tough-Dock™ powered dock with port replication for the Panasonic Toughbook® CF-52.
€1,143.60*incl. VAT
€945.12excl. VAT
RAM® Tough-Dock™ for Panasonic Toughbook CF-H1/CF-H2 Field & Health
No other dock for the Panasonic CF-H1 is easier to use than this one. With one hand you can easily insert or remove the Toughbook. The unique spring-loaded locking and roller system works flawlessly together and the overall shape of the dock does not block any function. The built-in combination lock adds security so your MCA is there when you need it. Additional features include 5 USB hubs, Ethernet, Serial, VGA and power. RAM offers mounting systems for a wide range of medical and field applications. This unique dock solution for the Panasonic CF-H1 mounts separately on any flat surface or can be combined with a RAM rubber ball-and-socket system for unmatched ergonomics and viewing angles. Whether the MCA is used in the emergency department, a doctor's office or an ambulance, RAM has what you need to mount the Panasonic CF-H1 exactly where you want. Keep it safe, secure and ready for use with RAM. Included is a set of four nuts and bolts to attach the holder to RAM components or holders with the universal AMPS hole pattern.
€610.90*incl. VAT
€504.88excl. VAT
RAM® Tough-Dock™ for Panasonic Toughbook CF-U1
You already know the Panasonic CF-U1 is designed to survive a 1.2 meter drop, but why put it in a situation where that could happen? RAM is your primary source for custom mounting solutions for Panasonic laptops, tablets and, of course, UMPCs. Our new holders for the CF-U1 are everything you'd expect from RAM: a stunning design, easy to use and just as rugged as the CF-U1 itself. With RAM you have universal holders, vehicle-specific holders and the freedom to build whatever you want for a custom solution. Wherever the road, path or sky takes you, RAM has the perfect mounting solution that is everything you need and nothing you don't. You chose the Panasonic U1 for the freedom it offers. Don't limit it by choosing a mounting system that isn't up to the task. Choose wisely, choose RAM! Included is a set of four nuts and bolts to attach the holder to RAM components or holders with the universal AMPS hole pattern.
€767.72*incl. VAT
€634.48excl. VAT
RAM® Tough-Dock™ for Zebra ET401 & ET4x 10"
The RAM® Tough-Dock™ works with the Zebra ET401 with RAM® Skin™ or the ET40 & ET45 10" with Rugged Frame. This dock lets you keep the device charged via the pogo pin contacts when it is docked—power is supplied through the dock's 5.5mm DC power connector. The dock also allows the tablet's scan function to operate on the side, as well as tablet accessories such as the Zebra Expansion Back and PowerPack Battery. This vehicle dock is compatible with C- and D-size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases to attach a double socket arm and complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate that is compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device.
€206.21*incl. VAT
€170.42excl. VAT
RAM® Tough-Dock™ for Zebra ET401 & ET4x 8"
The RAM® Tough-Dock™ (RAM-HOL-ZE20PU) works with the Zebra ET401 with RAM® Skin™ or the ET40 & ET45 8" with Rugged Frame. With this dock you can keep the device charged via the pogo pin contacts when it is docked—power is supplied via the dock's 5.5mm DC power connector. The dock also allows the tablet's scan function on the side to work, as well as tablet accessories such as the Zebra Expansion Back and PowerPack Battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate that is compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device.
€180.89*incl. VAT
€149.50excl. VAT
RAM® Tough-Dock™ power + data with lock for Zebra ET4x 10"
The RAM® Tough-Dock™ power + data with lock works with the Zebra ET40 and ET45 10" with Rugged Frame. This dock (RAM-HOL-ZE21PDNLLU) has a top locking design to secure the tablet without causing wear to the dock itself. Power is delivered via a 5.5mm DC barrel connector and keeps the device charged through the pogo pin contacts when the device is docked. A single USB Type-A pigtail connector is provided for adding one additional input device. The dock also includes space at the rear for tablet accessories such as the Zebra Expansion Back, PowerPack Battery and GDS® Ergo™ accessories such as the GDS® Roto-Mag™ and GDS® Hand-Stand™. To mount this dock, pair a RAM® base with a 4-hole AMPS or 75mm x 75mm VESA pattern for attaching a double socket arm to complete your mounting solution. Take the solution a step further by making use of the built-in 2-hole mounting plate, compatible with the RAM® 2-hole diamond base for mounting an additional device such as a phone, scanner, printer or other handheld device.
€234.44*incl. VAT
€193.75excl. VAT
RAM® Tough-Dock™ Power + Data with lock for Zebra ET4x 8"
For frequent docking and undocking, this dock works with the Zebra ET401 with RAM® Skin™ or ET40 & ET45 8" with Rugged Frame. This RAM® Tough-Dock™ (RAM-HOL-ZE20PDNLLU) features a top-lock design to secure the tablet without wear on the dock itself. Power is provided via a 5.5mm DC barrel connector and keeps the device charged via the pogo pin contacts when the device is docked. A single USB Type-A pigtail connector is provided for adding one additional input device. The dock also provides room on the back for tablet expansions such as the Zebra Expansion Back, PowerPack Battery and GDS® Ergo™ accessories such as the GDS® Roto-Mag™ and GDS® Hand-Stand™. To mount this dock, combine a C- and D-size RAM® 4-hole AMPS or 75mm x 75mm VESA pattern base for attaching a double socket arm to complete your mounting solution. Take it a step further by using the built-in 2-hole mounting plate, compatible with the RAM® 2-hole diamond base, to attach an additional device such as a phone, scanner, printer or other handheld device.
€223.72*incl. VAT
€184.89excl. VAT
RAM® Tough-Dock™ power + dual USB with lock for Zebra ET4x 10"
The RAM® Tough-Dock™ power + dual USB with lock works with the Zebra ET40 and ET45 10" with Rugged Frame. This dock (RAM-HOL-ZE21PD2NLLU) has a top locking design to secure the tablet without causing wear to the dock itself. Power is delivered via a 5.5mm DC barrel connector and keeps the device charged through the pogo pin contacts when the device is docked. A dual USB Type-A pigtail connector is provided for adding up to two additional input devices. The dock also includes space at the rear for tablet accessories such as the Zebra Expansion Back, PowerPack Battery and GDS® Ergo™ accessories such as the GDS® Roto-Mag™ and GDS® Hand-Stand™. To mount this dock, pair a RAM® base with a 4-hole AMPS or 75mm x 75mm VESA pattern for attaching a double socket arm to complete your mounting solution. Take the solution a step further by making use of the built-in 2-hole mounting plate, compatible with the RAM® 2-hole diamond base for mounting an additional device such as a phone, scanner, printer or other handheld device.
€288.57*incl. VAT
€238.49excl. VAT
RAM® Tough-Dock™ Power + Dual USB with lock for Zebra ET4x 8"
The RAM® Tough-Dock™ Power + Dual USB with lock (RAM-HOL-ZE20PD2NLLU) works with the Zebra ET401 with RAM® Skin™ or ET40 & ET45 8" with Rugged Frame. This dock features a top-lock design to secure the tablet without wear on the dock itself. Power is provided via a 5.5mm DC barrel connector and keeps the device charged via the pogo pin contacts when the device is docked. A dual USB Type-A pigtail connector is provided for adding up to two additional input devices. The dock also provides room on the back for tablet expansions such as the Zebra Expansion Back, PowerPack Battery and GDS® Ergo™ accessories such as the GDS® Roto-Mag™ and GDS® Hand-Stand™. To mount this dock, combine a C- and D-size RAM® 4-hole AMPS or 75mm x 75mm VESA pattern base for attaching a double socket arm to complete your mounting solution. Take it a step further by using the built-in 2-hole mounting plate, compatible with the RAM® 2-hole diamond base, to attach an additional device such as a phone, scanner, printer or other handheld device.
€277.85*incl. VAT
€229.63excl. VAT
RAM® Tough-Dock™ Power + USB-C & USB-A for Zebra ET401 & ET4x 10"
With data and charging capabilities, the RAM® Tough-Dock™ works with the Zebra ET401 with RAM® Skin™ or ET40 & ET45 10" with Rugged Frame. With this dock you can connect a desired peripheral while the device stays charged via the pogo pin contacts when the device is docked. Power is supplied by connecting to the dock's 5.5mm DC power port, while peripheral support is provided by the built-in USB Type-A cable. The dock also allows the tablet's scan function on the side to work, as well as tablet expansions such as the Zebra Expansion Back and PowerPack Battery. This vehicle dock is compatible with C- and D-size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate, compatible with the RAM® 2-hole diamond base, to attach an additional device such as a phone or other handheld device.
€266.73*incl. VAT
€220.44excl. VAT
RAM® Tough-Dock™ Power + USB-C & USB-A for Zebra ET401 & ET4x 8"
With data and charging capabilities, the RAM® Tough-Dock™ works with the Zebra ET401 with RAM® Skin™ or ET40 & ET45 8" with Rugged Frame. With this dock you can connect a desired peripheral while the device stays charged via the pogo pin contacts when the device is docked. Power is supplied by connecting to the dock's 5.5mm DC power port, while peripheral support is provided by the built-in USB Type-A and USB Type-C cable. The dock also allows the tablet's scan function on the side to work, as well as tablet expansions such as the Zebra Expansion Back and PowerPack Battery. This vehicle dock is compatible with C- and D-size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate, compatible with the RAM® 2-hole diamond base, to attach an additional device such as a phone or other handheld device.
€256.36*incl. VAT
€211.87excl. VAT
RAM® Tough-Dock™ replacement key lock - composite
The RAM® Tough-Dock™ replacement key lock in composite is a replacement part for RAM® Tough-Dock docks.This key lock secures the device in the dock so it stays protected in place. Ideal as a replacement for a worn or lost lock to restore the security of the dock in vehicles and material handling.Replacement key lock in compositeFor RAM® Tough-Dock™ docksFor vehicles and material handlingSuitable as a replacement for the original part.
€31.65*incl. VAT
€26.16excl. VAT
RAM® Tough-Dock™ with ball for Panasonic Toughbook® CF-28 - CF-32
RAM Tough-Dock™ powered docking station with port replication AND ROUND ADAPTER BASE for Panasonic Toughbook® CF-28, CF-29, CF-30 and CF-31 rugged laptops.
€1,378.41*incl. VAT
€1,139.18excl. VAT
RAM® Tough-Dock™ with dual RF for Panasonic Toughbook® CF-28 - CF-31
RAM Tough-Dock™ powered docking station with port replication and DUAL RF PASS-THROUGH for Panasonic Toughbook® CF-28, CF-29, CF-30 and CF-31 rugged laptops.
€1,376.22*incl. VAT
€1,137.37excl. VAT
RAM® Tough-Dock™ with latch for Zebra ET4x 10"
For frequent docking and undocking, this dock works with the Zebra ET40 & ET45 10" with Rugged Frame. This RAM® Tough-Dock™ (RAM-HOL-ZE21PNLLU) has a top-latch design to secure the tablet without wear on the dock itself. Power is supplied via a 5.5mm DC barrel connector and allows you to keep the device charged through the pogo pin contacts when the device is docked. The dock also includes space at the back for tablet expansions such as the Zebra Expansion Back, PowerPack Battery and GDS® Ergo™ accessories such as the GDS® Roto-Mag™ and GDS® Hand-Stand™. To mount this dock, combine a C- and D-size RAM® 4-hole AMPS or 75mm x 75mm VESA pattern base to attach a double socket arm to complete your mounting solution. Take it a step further by using the built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, to mount an additional device such as a phone, scanner, printer or other handheld device.
€208.42*incl. VAT
€172.25excl. VAT
RAM® Tough-Dock™ with latch for Zebra ET4x 8"
For frequent docking and undocking, this dock works with the Zebra ET401 with RAM® Skin™ or ET40 & ET45 8" with Rugged Frame. This RAM® Tough-Dock™ (RAM-HOL-ZE20PNLLU) has a top-latch design to secure the tablet without wear on the dock itself. Power is supplied via a 5.5mm DC barrel connector and allows you to keep the device charged through the pogo pin contacts when the device is docked. The dock also includes space at the back for tablet expansions such as the Zebra Expansion Back, PowerPack Battery and GDS® Ergo™ accessories such as the GDS® Roto-Mag™ and GDS® Hand-Stand™. To mount this dock, combine a C- and D-size RAM® 4-hole AMPS or 75mm x 75mm VESA pattern base to attach a double socket arm to complete your mounting solution. Take it a step further by using the built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, to mount an additional device such as a phone, scanner, printer or other handheld device.
€198.28*incl. VAT
€163.87excl. VAT
RAM® Tough-Dock™ with port replication for GETAC B300
RAM Tough-Dock™ powered COMPOSITE docking station with port replication for the GETAC B300.
€1,409.07*incl. VAT
€1,164.52excl. VAT
RAM® Tough-Dock™ with power + data for Zebra ET401 & ET4x 10"
Equipped with data and charging capabilities, the RAM® Tough-Dock™ for Zebra ET40 & ET45 10" enterprise tablets with Rugged Frame lets you connect a desired peripheral while the device stays charged via the pogo pin contacts when it is docked. Power is supplied through the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in USB Type-A cable. The dock also allows the tablet's scan function to operate on the side, as well as tablet accessories such as the Zebra Expansion Back and PowerPack Battery. This vehicle dock is compatible with C- and D-size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases to attach a double socket arm and complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate that is compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device.
€222.45*incl. VAT
€183.84excl. VAT
RAM® Tough-Dock™ with power + data for Zebra ET401 & ET4x 8"
Equipped with data and charging capabilities, the RAM® Tough-Dock™ (RAM-HOL-ZE20PDU) works with the Zebra ET401 with RAM® Skin™ or the ET40 & ET45 8" with Rugged Frame. With this dock you can connect a desired peripheral device while the device stays charged via the pogo pin contacts when it is docked. Power is supplied via the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in USB Type-A cable. The dock also allows the tablet's scan function on the side to work, as well as tablet accessories such as the Zebra Expansion Back and PowerPack Battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate that is compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device.
€210.43*incl. VAT
€173.91excl. VAT