To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (66 reviews) Customers rate us on average 8,2/10 (66 reviews)

€0.00*incl. VAT €0.00excl. VAT

Laadkabels & adapters

24V 48V 80V Boosters Overige Druppel- & onderhoudsladers Laadkabels & adapters

83 products found

Adapter AUTO socket to BIKE plug

Adapter AUTO socket to BIKE plug

Adapter - AUTO socket to BIKE plugConnect your standard USB or GPS charger adapter to a MOTORCYCLE/DIN input such as on BMW, Triumph, Victory motor vehicles, specific Honda Gold Wing motorcycles and John Deere ATVs.•Auto input of 21 mm Ø with internal grooves that keep the connected adapter/connector securely in place.•Power is supplied by a MOTORCYCLE/DIN plug of 12 mm Ø.•Includes cap to protect the plug tip.•Length=12 inch/30 cm•Suitable for use at low temperatures down to -20 °C/-4 °FHigh-quality cable designed by TecMate. 3-year limited warranty.

€40.25*incl. VAT

€33.26excl. VAT

Adapter charge cable KET to SAE

Adapter charge cable KET to SAE

Convert your old TecMate or British battery charger cable into an SAE connector with weatherproof cover and cap.•Length=6 inch/15 cm•The 2-pole KET connector with locking clip converts to an SAE 2-pin connector to industry standard•Maximum cable current: 5 Amp•Suitable for use at very low temperatures down to -40 °C/-40 °F•Includes rubber cap and seal for OptiMATE SAE connector.High-quality cable designed by TecMate. 3-year limited warranty.

€16.05*incl. VAT

€13.26excl. VAT

Adapter charge cable KET to SAE

Adapter charge cable KET to SAE

Convert your old TecMate or British battery charger in order to connect an OptiMATE (or other SAE) permanent battery cable.Length=6 inch/15 cmThe KET/TM/British 2-pin connector converts to an SAE 2-pin connector to industry standardMaximum cable current: 5 AmpSuitable for use at very low temperatures down to -40 °C/-40 °F

€16.05*incl. VAT

€13.26excl. VAT

Adapter cigarette lighter to KET

Adapter cigarette lighter to KET

Adapter - cigarette lighter to KET - 90cm - TM-68

€25.73*incl. VAT

€21.26excl. VAT

Adapter extension cable SAE to Motor 180° contact

Adapter extension cable SAE to Motor 180° contact

Extension cable for adapter, SAE to MOTOR contact 180° - 120cmCable:18AWG 0.82MMConnector 1:SAEConnector 2:BIKE (DIN Z 12MM) PLUG, STRAIGHTLength:4FT / 120CMStarts temperature:-40°F / -40°C

€38.64*incl. VAT

€31.93excl. VAT

Adapter kit 3 pieces SAE to DC2,5

Adapter kit 3 pieces SAE to DC2,5

Adapter kit - 3 pieces - SAE to DC2.5Length of each: 12 inch/30 cm2-pin SAE connector conforming to the industry standard, with built-in sealCoaxial direct-current plug and input of 5,5×2,5 mm Ø with built-in sealMaximum cable current: 10 AmpSuitable for use at very low temperatures down to -40 °C/-40 °F, cable remains flexible at temperatures down to “below freezing”.

€38.64*incl. VAT

€31.93excl. VAT

Adapter SAE to XLR 3-pin 24V 30cm

Adapter SAE to XLR 3-pin 24V 30cm

Adapter SAE to XLR for charging a 24V batteryAdjust your OptiMate 24V battery charger to optimise the performance of the 24V battery of your equipment!Specifications:- Length: 30 cm- Connectors: SAE to XLR 3-pin connector- Cable class: 16AWG (1.31 mm²) SPT2-W- Use: -40°C/-40°F low-temperature use- Design: Includes in-line rubber seal for OptiMate heavy-duty SAE connector

€22.52*incl. VAT

€18.61excl. VAT

Adapter weatherproof SAE cable front panel mounting

Adapter weatherproof SAE cable front panel mounting

Adapter - weatherproof SAE cable front panel mounting

€37.04*incl. VAT

€30.61excl. VAT

Analogue battery tester 12V with accessories

Analogue battery tester 12V with accessories

The ultimate pocket-size tester for testing the performance and alternator voltage of batteries fitted in the vehicle, which every maintenance mechanic and technician should have!Easy to use! Place the clamps on the battery or connect to an installed SAE battery cable, and then proceed as follows:1.Check the battery's charge level. A battery with low voltage gives weak starting performance.2.Start the engine. The OptiMate TEST captures and displays the lowest starting voltages (for 20 seconds).3.While the engine is running, check the starting voltage of the alternator and the voltage regulator.TIP: A low charging voltage results in weak battery performance. A charging voltage that is too high causes excessive gassing and ultimately leads to damage to the lead-acid battery. A charging voltage that is too high is FATAL for a LiFePO4 starter battery!•Accuracy via microprocessor.•Easy-to-follow instructions on the back of the tester.•2-pin SAE connector conforming to the industry standard.•Battery clamp set of 40 inch/100 cm.•Fully sealed.A high-quality tester designed by TecMate. 3-year limited replacement warranty.

€93.41*incl. VAT

€77.20excl. VAT

Battery charger FLASHMEM 100 12V 100A 2,5m cable

Battery charger FLASHMEM 100 12V 100A 2,5m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 100 amperes. The charger is equipped with a microprocessor and has a 2.5m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 100A• Input power: 1700W• Charging current: 10-100A• Charging capacity: 10-1000Ah• Maintenance capacity: 10-3000AhTechnical characteristics:• Cable: 2.5m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

€1,958.38*incl. VAT

€1,618.50excl. VAT

Battery charger FLASHMEM 100 12V 100A 6m cable

Battery charger FLASHMEM 100 12V 100A 6m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 100 amperes. The charger is equipped with a microprocessor and has a 6m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 100A• Input power: 1700W• Charging current: 10-100A• Charging capacity: 10-1000Ah• Maintenance capacity: 10-3000AhTechnical characteristics:• Cable: 6m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

€2,060.63*incl. VAT

€1,703.00excl. VAT

Battery charger FLASHMEM 120 12V 120A 2,5m cable

Battery charger FLASHMEM 120 12V 120A 2,5m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 120 amperes. The charger is equipped with a microprocessor and has a 2.5m cable. Performance characteristics: • Voltage: 12V • Input voltage: 110-240V - 50-60Hz • Current: 120A • Input power: 2100W • Charging current: 10-120A • Charging capacity: 10-1200Ah • Maintenance capacity: 10-3600Ah Technical characteristics: • Cable: 2.5m • Microprocessor • Application: reprogramming, flashing & diagnosis of cars • Selectable output voltage 14.8V • Protection against reverse polarity and short circuit • Protection against overload and voltage faults • Permanent and stable current • Robust clamps *Suitable for AGM, WET, Lithium LiFePO4

€2,162.88*incl. VAT

€1,787.50excl. VAT

Battery charger FLASHMEM 120 12V 120A 6m cable

Battery charger FLASHMEM 120 12V 120A 6m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 120 amperes. The charger is equipped with a microprocessor and has a 6m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 120A• Input power: 2100W• Charging current: 10-120A• Charging capacity: 10-1200Ah• Maintenance capacity: 10-3600AhTechnical characteristics:• Cable: 6m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

€2,265.12*incl. VAT

€1,872.00excl. VAT

Battery charger FLASHMEM 60 12V 60A 2,5m cable

Battery charger FLASHMEM 60 12V 60A 2,5m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 60 amperes. The charger is equipped with a microprocessor and has a 2,5m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 60A• Input power: 1100W• Charging current: 5-60A• Charging capacity: 5-600Ah• Maintenance capacity: 5-1800AhTechnical characteristics:• Cable: 2,5m• Microprocessor• Application: reprogramming, flashing & diagnostics of cars• Selectable output voltage 14,8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

€1,274.13*incl. VAT

€1,053.00excl. VAT

Battery charger FLASHMEM 60 12V 60A 6m cable

Battery charger FLASHMEM 60 12V 60A 6m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 60 amperes. The charger is equipped with a microprocessor and has a 6m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 60A• Input power: 1100W• Charging current: 5-60A• Charging capacity: 5-600Ah• Maintenance capacity: 5-1800AhTechnical characteristics:• Cable: 6m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

€1,360.64*incl. VAT

€1,124.50excl. VAT

Battery clamps 10A 50cm cable SAE connector

Battery clamps 10A 50cm cable SAE connector

Cable:16AWG 1.31MMConnector 1:SAEConnector 2:OPTIMATE CLIPSLength:20 / 50CMStarts temperature:-40°F / -40°C

€20.89*incl. VAT

€17.26excl. VAT

Battery level indicator SAE std/wet cell

Battery level indicator SAE std/wet cell

Battery level indicator - SAE - std/wet cell

€17.77*incl. VAT

€14.69excl. VAT

Cable 1m 50mm² with red auxiliary connector

Cable 1m 50mm² with red auxiliary connector

Fit a connector on all your vehicles and machines to make their batteries accessible at any time; essential for fleets of vehicles which regularly require restarting.

€117.97*incl. VAT

€97.50excl. VAT

Cable 2m/70mm²/ red connector + Park plug connector

Cable 2m/70mm²/ red connector + Park plug connector

CABLE 2M/70MM²/ RED CONNECTOR + PARK PLUG CONNECTOR

€385.38*incl. VAT

€318.50excl. VAT

Cable tank bag

Cable tank bag

Cable - tank bagLow profile with a 90° angle with M14 threaded bush and nylon nut (9/16? / 14 mm hole required).Custom seals for ROUND (e.g. Wunderlich) or OVAL (SW Motech) ‘crosshair’ power inputs, and for hard case walls.External 2-pole SAE connector with in-line waterproof seal for optional OptiMate cable adapter.Internal 2-pole SAE connector / adapter for USB or other device.

€32.20*incl. VAT

€26.61excl. VAT

Cable with battery clamps KET

Cable with battery clamps KET

Cable with battery clamps - KETLength : 6ft / 180cmTM/KET

€24.12*incl. VAT

€19.93excl. VAT

Cable with DIN connector cigarette lighter

Cable with DIN connector cigarette lighter

Cable - with DIN connector - cigarette lighterLength : 20/50cm5A maxTM/KETTM-72

€37.04*incl. VAT

€30.61excl. VAT

Cable with red and black clamps for DHC trickle chargers

Cable with red and black clamps for DHC trickle chargers

cable with red and black clamps

€7.29*incl. VAT

€6.02excl. VAT

Charge connector MagCode cable 12V magnetic

Charge connector MagCode cable 12V magnetic

The OptiMate MagCode ensures a fast, safe and easy battery charger connection. Attach the magnet to its counterpart on the battery and (re)charge without using clamps. This magnet should be attached to the battery charger via the SAE connector. This quick connection is suitable for indoor and outdoor use (down to -40°C).Specifications:• Magnetic charge connector• MagCode system• Cable protection• Voltage: 12V• Cable length: 75cm• SAE charge connector• Operating temperature: down to -40°C

€104.80*incl. VAT

€86.61excl. VAT