Chemical products

PROFESSIONAL PROTECTION FOR ALL NON-FERROUS METALSInox-Pro cleans, beautifies and protects in 1 operation. Inox-Pro protects and cleans matt or polished metal surfaces such as stainless steel, aluminium, chrome, non-ferrous metals, etc. Inox-Pro leaves an antistatic layer and prevents the attraction of dirt. Inox-Pro can also be used for caring for, protecting and cleaning ceramic parts, treated wood and plastics. Inox-Pro does not attack glass, plastic or various rubbers.AdvantagesThe surface becomes antistatic and dirt-repellent. Leaves a dry, glossy protective layer with a long service life. Free of silicones, oils and solvents.Use Shake the can well before use. Spray the surface evenly. Rub out and polish with a dry, soft cloth. Technical specifications Colour: milky Odour: almost odourless Water solubility: miscible with water. Ignition temperature: >200°C Shelf life: 24 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

PROTECTIVE ELASTIC UNDERCOATINGIPR-570 Impact Protect is a versatile impact-resistant coating. It effectively dampens noise and vibrations, adheres durably to various materials and is overpaintable with virtually all paint systems. The coating offers strong chemical resistance and retains its properties within a wide temperature range, guaranteeing a long service life. Free of bitumen and silicones AdvantagesElastic coating Immediately waterproof Protects against impact and corrosion Use Test the adhesion on plastics, powder coatings, exotic wood types and bituminous materials. Ensure a clean and dry substrate. Clean with a Safety Clean and/or Multifoam. Lightly sand smooth surfaces. Shake the spray can for 1 minute after the mixing ball has come loose. Spray a thin base layer from a distance of 25-40 cm. Build up layer by layer to a thickness of 0.2-1 mm, depending on the substrate and application. Preferably work in thin layers and wait until the previous layer is dry. After use: hold the spray can upside down and spray briefly to clean the nozzle. Can be painted after 90 minutes with most paint systems. Can also be used as a top layer without further finishing. Clean any splashes immediately with Safety Clean. After curing, the coating can only be removed mechanically. Technical specifications(all data at 20°C and 50% relative humidity) Composition: rubber / synthetic resin. Colour: Black. Consistency: spray paint. Density: +/- 0.8 g/ml. Application temperature: +15°C to +25°C. Temperature resistance: -40°C to +90°C. Skin formation: 25 minutes. Time between layers: 5-10 minutes. Full drying: 90 minutes. Resistance: Water, seawater, oil, weak acids and bases. Shelf life: 36 months, stored in a dry room between +10°C and +30°C.

The Novatio Kleenspray-S - Aerosol 500Ml is a professional maintenance/cleaning product from Novatio.This Novatio product is intended for professional maintenance, cleaning or protection in the workshop and industry. Use it according to the instructions on the packaging for the best result.Professional chemical product from NovatioFor maintenance / cleaning / protectionOriginal Novatio part

METAL CLEANER Very easy to use, reacts quickly and is economical in consumption. Thanks to the jet spray, Kleenspray-S provides efficient cleaning in hard-to-reach places. Degreases and cleans metal but also glass, ceramics, textiles and many plastics. Kleenspray-S leaves no residue and can, if necessary, be overpainted after one minute. AdvantagesCleans and degreases super fast. Also effective in hard-to-reach places thanks to the jet spray. Dries extra fast and leaves no residue.Use Apply, allow to act and wipe off. Repeat if necessary. Before use on sensitive materials, first test on a barely or non-visible spot.Technical specifications Composition: acetone and isopropyl alcohol among others. Form (at 20°C): liquid. Colour: transparent. Odour: characteristic. Vapour pressure at 20°C (hPa): 43. Flash point: <21°C. Relative density (at 20°C): 0.72. Water solubility: moderately soluble. Relative vapour density: > 1. Shelf life: 36 months, dry, cool and frost-free. For specific technical information per packaging, please consult the SDS, safety data sheet.

UNBLOCKING AND CLEANING OF DIESEL PARTICULATE FILTERS (DPF) WITHOUT DISMANTLING Novaflush DPF One is usable on heavily contaminated to fully blocked soot filters. Dismantling is unnecessary. It prevents and ends limp mode and restores the optimal performance of the DPF and catalytic converter. Always use Novaflush DPF One before Novaflush DPF Two by means of the Novaflush DPF Gun. BenefitsDeep cleaning of heavily contaminated DPF and catalytic converters Reduces fuel consumption and CO2/ NOx emissions Safe for all types of diesel engines Safe for ceramic and metal partsUseFit the Novaflush DPF Gun according to the processing guideline. Fill the reservoir with 750 ml Novaflush DPF One. Connect it to a compressed air line with a maximum pressure of 4 bar (58 PSI). Place the vehicle in a well-ventilated area. Let the exhaust system cool down to 40°C or lower (hand-warm). Higher temperatures reduce effectiveness. Place a collection tray under the exhaust to catch the dripping liquid. Remove the pressure sensor at the front of the soot particulate filter. Choose the most suitable nozzle for the application and insert it into the opening of the pressure sensor. Spray in the direction of the DPF, towards the rear. Empty the entire tank (750 ml) of Novaflush DPF One. Let Novaflush DPF One act for 30 minutes. Fill the reservoir of the DPF Gun with 750 ml Novaflush DPF Two and empty the entire contents of the tank in the direction of the DPF. Fill the reservoir of the DPF Gun with 750 ml clean water and empty the entire contents of the tank in the direction of the DPF. Now blow air through the exhaust system for 3 minutes, in the direction of the DPF. Fit the pressure sensor and start the vehicle. Let the engine idle for about 20 minutes. Then start a forced regeneration or take a test drive with progressively higher revs. It is normal for foam and/or white smoke to come out of the exhaust during this. Maintenance Novaflush DPF GunRinse the gun through with 250 ml water after each filter cleaning so that any residue of Novaflush DPF is removed. Store the dried gun in a dry and dust-free environment. Prevention and maintenance guidelinesThe result of the treatment can be maintained by adding Novafuel Powerkleen to the fuel to clean the injection and combustion circuit (stimulating the regeneration of the soot filter). Specifically for the maintenance of the DPF, Novafuel DPF Care is recommended.Technical specifications Form: red clear liquid. Odour: characteristic amine odour. pH: 11. Flash point: +95°C. Shelf life: 84 months, dry, cool and frost-free.

The Novatio Lubricant H1 - Aerosol 400ML (art. VD214601000) is a Novatio lubricant for forklifts and material handling.This Novatio product is a professional maintenance product for use in the workshop and internal transport. It supports cleaning, lubrication or maintenance of machines and parts.Professional Novatio maintenance productFor workshop, forklifts and material handlingOriginal part for forklifts and material handling.

CONCENTRATED CLEANER AND PROTECTOR FOR ATMOSPHERIC SOILING Ideal cleaner and protector for all soiling and deposits, safe to use on all materials. Can also be used preventively to prevent soiling caused by the atmosphere, traffic, rain, etc. Contains surfactants that are 90% biodegradable in accordance with the OECD standard. AdvantagesSafely removes all dirt caused by the atmosphere, traffic, rain, etc. Applicable both indoors and outdoors. Provides long-lasting protection on porous substrates.Use MAG Cleaner is a highly concentrated product, add 5 to 10% MAG Cleaner to water. Apply generously with a brush or spray onto a dry surface. Leave to act for at least 1/2 day. Rinse off with a garden hose or high-pressure cleaner. Protect plants against splashes and run-off water.Technical specifications Composition: detergents. Form: liquid. Colour: transparent. Odour: characteristic. pH: 7.5. Vapour pressure at 20°C (hPa): 23. Dilute 5 to 10% in water. Shelf life: 36 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

CONCENTRATED CLEANER AND PROTECTOR FOR ATMOSPHERIC SOILING Ideal cleaner and protector for all soiling and deposits, safe to use on all materials. Can also be used preventively to prevent soiling caused by the atmosphere, traffic, rain, etc. Contains surfactants that are 90% biodegradable in accordance with the OECD standard. AdvantagesSafely removes all dirt caused by the atmosphere, traffic, rain, etc. Applicable both indoors and outdoors. Provides long-lasting protection on porous substrates.Use MAG Cleaner is a highly concentrated product, add 5 to 10% MAG Cleaner to water. Apply generously with a brush or spray onto a dry surface. Leave to act for at least 1/2 day. Rinse off with a garden hose or high-pressure cleaner. Protect plants against splashes and run-off water.Technical specifications Composition: detergents. Form: liquid. Colour: transparent. Odour: characteristic. pH: 7.5. Vapour pressure at 20°C (hPa): 23. Dilute 5 to 10% in water. Shelf life: 36 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

Contents: Novacare Shamp-Wax Windows and Doors 500ml (200605116) Surface Renewer Windows and Doors 400ml (485302116) Novawipe Microfibre FS Soft green (467191390) Rasta wash mitt (467175390)

CLEANING, LUBRICATING AND PROTECTINGMaintenance Spray H1 combines a high creep capacity with fast moisture displacement for use in all food-processing companies. Maintenance Spray H1 loosens jammed screws, bolts, nuts, pipe fittings and connections and leaves behind a protective film that prevents rust and oxidation.AdvantagesFor fine precision lubrication. Rust dissolver and protector for bolts and nuts. Displaces water and moisture through fast creep and penetration capacity.Use Shake before use. Spray onto the application. Use the straw for less accessible places. Technical specifications NSF registration number: Category H1, in accordance with: FDA, Title 21, Section 178.3570. Base: white mineral oil Free of: lead, animal fat and synthetic oils. Odour: typical. Temperature resistance: -15°C to +110°C. Shelf life: 24 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

MAKITA ADAPTER FOR STAPLE REPAIR CORDLESS

HAND GUN 2x200ml

LONG-LASTING PROTECTION AGAINST RODENTSMarten Safe has a very long working time; applying just twice a year is sufficient, except in case of thorough cleaning. Marten Safe contains extra corrosion-resistant additives for the engine block, transmission parts and suspension.AdvantagesFor rubber and cables. Safe for animals. Contains corrosion-inhibiting additives.Use Clean heavily soiled parts with Novakleen. Shake well before use. Only apply to a cold and dry substrate. Technical specifications Base: Polyalphaolefin. VOC: ± 70%. Colour: Transparent. Odour: Odourless. Physical state: Sticky. Specific gravity at 20°C: 0.89 g/ml. Vapour pressure at 20°C: 3 to 4 bar. Viscosity: 145. Shelf life: 120 months, store cool, dry and frost-free.

COMPRESSED-AIR GUN WITH TELESCOPIC PISTONFor applying all one-component adhesives and sealants. A patented system with a telescopic piston presses the product evenly out of the cartridge without compressed air coming into contact with the product. A quick-release system in the air pressure supply to the piston immediately stops the supply of product when the trigger is released. The accessories supplied with the gun make it possible to process all one-component products, in plastic cartridges as well as in aluminium cartridges or sausage packaging. The pressure for dispensing the product is controlled with a micrometric pressure regulator, which results in perfect dosing and an extremely even flow. This pressure regulator makes it possible to dispense products of different viscosity without changing the pressure of the supply line. With two types of nozzle, all structures can be achieved. A second micrometric pressure regulator allows the spray pattern to be adjusted.AdvantagesMultifunctional Simple Maintenance-freeUseSee the instructions for use under Downloads.Technical specifications Working pressure: from 3 to 8 bar. Separate pressure control for spray pattern and product supply. No cleaning - product does not come into contact with the mechanical parts of the gun. The gun is self-cleaning by slowly releasing the trigger at the end of the work. Very easy changing of cartridges. Cartridges and sausage packaging can be processed with the standard nozzle.

COMPRESSED-AIR GUN WITH TELESCOPIC PISTONFor applying all one-component adhesives and sealants. A patented system with a telescopic piston presses the product evenly out of the cartridge without compressed air coming into contact with the product. A quick-release system in the air pressure supply to the piston immediately stops the supply of product when the trigger is released. The accessories supplied with the gun make it possible to process all one-component products, in plastic cartridges as well as in aluminium cartridges or sausage packaging. The pressure for dispensing the product is controlled with a micrometric pressure regulator, which results in perfect dosing and an extremely even flow. This pressure regulator makes it possible to dispense products of different viscosity without changing the pressure of the supply line. With two types of nozzle, all structures can be achieved. A second micrometric pressure regulator allows the spray pattern to be adjusted.AdvantagesMultifunctional Simple Maintenance-freeUseSee the instructions for use under Downloads.Technical specifications Working pressure: from 3 to 8 bar. Separate pressure control for spray pattern and product supply. No cleaning - product does not come into contact with the mechanical parts of the gun. The gun is self-cleaning by slowly releasing the trigger at the end of the work. Very easy changing of cartridges. Cartridges and sausage packaging can be processed with the standard nozzle.

DOUBLE-SIDED MOUNTING TAPE FOR GLAZING BARS AND MUNTINSDouble-sided acrylic tape, suitable for indoor and outdoor use. The PE foam core absorbs differences in expansion. Resistant to extreme temperatures, high UV exposure, air pollution, salt spray, … .AdvantagesAdheres to glass, aluminium and powder coating. Absorbs expansion differences during temperature fluctuation. Long-lasting UV resistance.Use Apply to a clean and dry surface, if necessary clean with Safety Clean and/or Multifoam. Remove the release liner, join the parts and press firmly. High immediate strength. Heating the bonded pieces (up to +65°C) accelerates the strength build-up. Test adhesion first on substrates based on PE, PP, silicones and bitumen. Treating difficult plastics and powder coatings with Seal&Bond Special Primer can improve adhesion, as can increasing the bonding surface by sanding.Technical specifications Adhesive: acrylic. Carrier: PE foam Release liner: polyethylene. Colour: black. Thickness: 0,4 mm. Pressure-sensitive: cures under pressure. Application temperature between +5°C and +35°C. Temperature resistance: -40°C to +100°C (peak up to +150°C) Shear strength (static, after 72 h.): 72 N/cm². Tensile strength (after 72 h.): 120 N/cm². Density: 100 kg/m². Shelf life: 36 months, stored dry, cool and frost-free.

DOUBLE-SIDED MOUNTING TAPE FOR GLAZING BARS AND MUNTINSDouble-sided acrylic tape, suitable for indoor and outdoor use. The PE foam core absorbs differences in expansion. Resistant to extreme temperatures, high UV exposure, air pollution, salt spray, … .AdvantagesAdheres to glass, aluminium and powder coating. Absorbs expansion differences during temperature fluctuation. Long-lasting UV resistance.Use Apply to a clean and dry surface, if necessary clean with Safety Clean and/or Multifoam. Remove the release liner, join the parts and press firmly. High immediate strength. Heating the bonded pieces (up to +65°C) accelerates the strength build-up. Test adhesion first on substrates based on PE, PP, silicones and bitumen. Treating difficult plastics and powder coatings with Seal&Bond Special Primer can improve adhesion, as can increasing the bonding surface by sanding.Technical specifications Adhesive: acrylic. Carrier: PE foam Release liner: polyethylene. Colour: black. Thickness: 0,4 mm. Pressure-sensitive: cures under pressure. Application temperature between +5°C and +35°C. Temperature resistance: -40°C to +100°C (peak up to +150°C) Shear strength (static, after 72 h.): 72 N/cm². Tensile strength (after 72 h.): 120 N/cm². Density: 100 kg/m². Shelf life: 36 months, stored dry, cool and frost-free.

MULTIFUNCTIONAL SURFACE TREATMENTMBX belts are made of polyamide fabric with a tensile strength of up to 440 kg. The spring steel wires are anchored in a U shape. This product offers optimal flexibility, safety and service life: no clogging, no heating up and no grinding required. The MBX Rubber Brush makes it possible to remove adhesive residue safely and quickly. The MBX Rubber Brush is composed of polymers and has a long service life.AdvantagesSandblasting effect thanks to the uniquely folded, ground and hardened spring steel. The flexible arrangement of the steel wires makes it possible to work all shapes. The belt is carried on an air cushion for maximum flexibility.Technical specifications   

MULTIFUNCTIONAL SURFACE TREATMENTMBX belts are made of polyamide fabric with a tensile strength of up to 440 kg. The spring steel wires are anchored in a U shape. This product offers optimal flexibility, safety and service life: no clogging, no heating up and no grinding required. The MBX Rubber Brush makes it possible to remove adhesive residue safely and quickly. The MBX Rubber Brush is composed of polymers and has a long service life.AdvantagesSandblasting effect thanks to the uniquely folded, ground and hardened spring steel. The flexible arrangement of the steel wires makes it possible to work all shapes. The belt is carried on an air cushion for maximum flexibility.Technical specifications   

The Novatio Measuring cup 100 ml is a dosing cup with graduation for measuring and mixing Novatio products.With this cup you accurately measure the correct quantities, ideal for preparing two-component products and dilutions. Practical accessory for correct processing.Measuring cup with graduation, 100 mlFor accurate measuring and mixingProfessional Novatio accessory

The Novatio Measuring Cup 1L is a dosing cup with graduated scale for measuring out and mixing Novatio products.With this cup you accurately measure out the right quantities, ideal for preparing two-component products and dilutions. A practical accessory for correct processing.Measuring cup with graduated scale, 1 litreFor accurate measuring and mixingProfessional Novatio accessory

CLEANING, THINNING AND ETCHING OF EPOXY Strong cleaning and solvent agent, ideal for tools contaminated after epoxy work. Excellent thinner for epoxy, for better impregnation into porous materials. Ideal etching agent for better adhesion, as preparation for bonding, coatings and repairs on difficult surfaces such as old epoxy layers, powder coatings and plastics.BenefitsSuper-powerful and fast-evaporating cleaner. Thinner for epoxy resins. Etching agent.UseThinner: add a maximum of 4% Megaclean to the Novatio epoxy resins if thinning is desired. Etching agent: apply Megaclean to a dry cloth and rub it onto the surface. Test the surface first for resistance and colour fastness. Does not attack carbon steel, stainless steel, polyester, aluminium and Teflon.Technical specifications Composition: butanone. Form: liquid. Colour: colourless. Odour: characteristic. Vapour pressure at 20°C (hPa): 105. Boiling point: 80°C. Freezing point: -86°C. Flash point: -4°C. Soluble in: water, alcohol, ether. Density at 20°C: 0,804 - 0,808 kg/l (ASTMD 4052). Shelf life: 36 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

CLEANING, THINNING AND ETCHING OF EPOXY Strong cleaning and solvent agent, ideal for tools contaminated after epoxy work. Excellent thinner for epoxy, for better impregnation into porous materials. Ideal etching agent for better adhesion, as preparation for bonding, coatings and repairs on difficult surfaces such as old epoxy layers, powder coatings and plastics.BenefitsSuper-powerful and fast-evaporating cleaner. Thinner for epoxy resins. Etching agent.UseThinner: add a maximum of 4% Megaclean to the Novatio epoxy resins if thinning is desired. Etching agent: apply Megaclean to a dry cloth and rub it onto the surface. Test the surface first for resistance and colour fastness. Does not attack carbon steel, stainless steel, polyester, aluminium and Teflon.Technical specifications Composition: butanone. Form: liquid. Colour: colourless. Odour: characteristic. Vapour pressure at 20°C (hPa): 105. Boiling point: 80°C. Freezing point: -86°C. Flash point: -4°C. Soluble in: water, alcohol, ether. Density at 20°C: 0,804 - 0,808 kg/l (ASTMD 4052). Shelf life: 36 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

AdvantagesQuartz sprinkling grain for medium-heavy loads. Also epoxy mortar applications.