To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Universele houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

471 products found

RAM® handlebar U-bolt double ball holder – C size long

RAM® handlebar U-bolt double ball holder – C size long

The RAM-231-D-202U consists of a stainless steel U-bolt base, a long double socket arm with a diameter of 1.5" and a round base adapter with the universal AMPS hole pattern. This package includes hardware suitable for rails with a diameter of 0.50" to 1". The base includes black end caps that fit over the exposed ends of the U-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The holder is equipped with a RAM patented 1.5" diameter rubber ball-and-socket system that has adjustment points at both ends of the double socket arm; this allows virtually infinite adjustability and perfect viewing angles.

€137.76*incl. VAT

€113.85excl. VAT

RAM® handlebar U-bolt double ball holder with 9mm hole – medium

RAM® handlebar U-bolt double ball holder with 9mm hole – medium

The RAM-B-149Z-272U consists of a medium-length B-size arm with our handlebar U-bolt base for rails from .5" to 1.25" diameter and our 9mm angled bolt-head adapter ball base.

€78.96*incl. VAT

€65.26excl. VAT

RAM® handlebar U-bolt double ball holder with 9mm hole – short

RAM® handlebar U-bolt double ball holder with 9mm hole – short

The RAM-B-149Z-272U consists of a short-length B-size arm with our handlebar U-bolt base for rails from .5" to 1.25" diameter and our 9mm angled bolt-head adapter ball base.

€74.57*incl. VAT

€61.63excl. VAT

RAM® handlebar U-bolt double ball holder with AMPS hole pattern

RAM® handlebar U-bolt double ball holder with AMPS hole pattern

The RAM-B-149Z-347U consists of a galvanised U-bolt base, double socket arm and square adapter base with the universal AMPS hole pattern. This package includes hardware suitable for rails with a diameter from 0.50" to 1.25". The base includes black end caps for the exposed ends of the U-bolt. The supplied composite rail adapter can narrow the rail to a minimum width of 0.5". The square adapter base has four pre-drilled holes in each corner, forming the universal AMPS hole pattern of 1.5 x 1.188 (hole spacing). The holder features the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€68.40*incl. VAT

€56.53excl. VAT

RAM® handlebar U-bolt double ball holder with rectangular AMPS plate

RAM® handlebar U-bolt double ball holder with rectangular AMPS plate

The RAM-B-149Z-C-347U consists of a galvanised U-bolt base, a LONG double socket arm and a square adapter base with the universal AMPS hole pattern. This package includes hardware suitable for rails with a diameter from 0.50" to 1.25". The base includes black end caps for the exposed ends of the U-bolt. The supplied composite rail adapter can narrow the rail to a minimum width of 0.5". The square adapter base has four pre-drilled holes in each corner, forming the universal AMPS hole pattern of 1.5 x 1.188 (hole spacing). The holder features the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€83.56*incl. VAT

€69.06excl. VAT

RAM® handlebar U-bolt double ball holder with round plate – C size short

RAM® handlebar U-bolt double ball holder with round plate – C size short

The RAM® handlebar U-bolt double ball holder with round plate consists of a zinc-plated U-bolt base in C size (1.5"), a short double socket arm in C size and a RAM® round base adapter in C size for attaching a tablet holder. The round base adapter has a hole pattern that matches the industry-standard AMPS hole pattern and fits a wide range of RAM® holders and/or third-party tablet holders. This package includes mounting hardware suitable for handlebars and rails with a diameter of 0.50" to 1.25". A composite rail adapter can narrow the rail to a minimum width of 0.5". The holder is fitted with a RAM® patented 1.5" diameter rubber ball-and-socket system in C size that has adjustment points at both ends of the double socket arm; this allows virtually infinite adjustability and perfect viewing angles. This holder is ideal for securely mounting a tablet on a motorcycle or ATV/Side By Side vehicle.

€97.03*incl. VAT

€80.19excl. VAT

RAM® handlebar U-bolt double ball mount – B-size long

RAM® handlebar U-bolt double ball mount – B-size long

The RAM-B-149ZU-C consists of a galvanized U-bolt base, LONG-length double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and fits a large number of RAM Mount and third-party mounts. This package includes mounting hardware for rails with a diameter of 0.50" to 1.25". A composite rail adapter can narrow the rail to a minimum width of 0.5". The mount features the patented 1" diameter rubber ball-and-socket RAM system, with adjustment points at both ends of the double socket arm; this provides virtually infinite adjustability and perfect viewing angles.

€82.23*incl. VAT

€67.96excl. VAT

RAM® handlebar U-bolt double ball mount – B-size medium

RAM® handlebar U-bolt double ball mount – B-size medium

The RAM-B-149ZU consists of a galvanized U-bolt base, double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and fits a large number of RAM® components. Included is mounting hardware for rails with a diameter of .5" to 1.25". A composite rail adapter can narrow the rail to a minimum width of 0.5". Also included is a B-size medium-length double socket arm with adjustment points at both ends, allowing virtually infinite adjustability.

€67.02*incl. VAT

€55.39excl. VAT

RAM® handlebar U-bolt double ball mount – B-size short

RAM® handlebar U-bolt double ball mount – B-size short

The RAM-B-149ZU-A consists of a B-size short-length arm, our handlebar U-bolt base for rails with a diameter of 0.5" to 1.25" and a diamond ball base with two-hole AMPS hole pattern.

€64.48*incl. VAT

€53.29excl. VAT

RAM® handlebar U-bolt double ball mount with round plate - B-size long

RAM® handlebar U-bolt double ball mount with round plate - B-size long

The RAM-B-101-C-231ZU consists of a zinc-plated U-bolt base, a 6" long double socket arm and a round base of 2.5" diameter with the universal AMPS hole pattern. This package includes hardware suitable for rails from 0.50" to 1.25" diameter. The base includes black cover caps for the exposed ends of the U-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a patented RAM rubber ball-and-socket system of 1" diameter with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€84.39*incl. VAT

€69.74excl. VAT

RAM® handlebar U-bolt double ball mount with round plate – B size medium

RAM® handlebar U-bolt double ball mount with round plate – B size medium

The RAM-B-149Z-202U consists of a galvanised U-bolt base, double socket arm and round base adapter. The round base adapter has a hole pattern that matches the industry-standard AMPS hole pattern and connects to a large number of RAM Mount and third-party holders. This package includes hardware suitable for rails with a diameter of 0.50" to 1.25". A composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€70.41*incl. VAT

€58.19excl. VAT

RAM® handlebar U-bolt double ball mount with round plate and without hardware

RAM® handlebar U-bolt double ball mount with round plate and without hardware

The RAM-B-101U-ME1 consists of a B size medium-length double socket arm with a round 2.5" diameter plate with universal AMPS hole pattern and a U-bolt base without included installation hardware.

€60.71*incl. VAT

€50.17excl. VAT

RAM® handlebar U-bolt holder for Garmin zumo 400-660 - short

RAM® handlebar U-bolt holder for Garmin zumo 400-660 - short

The RAM-B-184U consists of a galvanised U-bolt base, double socket arm and 2" x 1.7" rectangular base with the universal AMPS hole pattern. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and fits a wide range of RAM holders and third-party holders. This package includes hardware suitable for rails from 0.50" to 1.25" diameter. A composite rail adapter can narrow the rail to a minimum width of 0.5”. The holder is designed with a patented RAM ball-and-socket system with 1" diameter rubber ball, with adjustment points at both ends of the short double socket arm; this provides virtually infinite adjustment and perfect viewing angles.

€65.19*incl. VAT

€53.88excl. VAT

RAM® handlebar U-bolt holder without hardware

RAM® handlebar U-bolt holder without hardware

The RAM-B-149A-202-UK1U consists of a short-length B-size double socket arm with a round 2.5" diameter plate with the universal AMPS hole pattern and a U-bolt base without hardware.

€58.04*incl. VAT

€47.97excl. VAT

RAM® handlebar U-bolt mount for Garmin zumo 400-660 – medium

RAM® handlebar U-bolt mount for Garmin zumo 400-660 – medium

The RAM-B-184U consists of a galvanised U-bolt base, double socket arm and 2" x 1.7" rectangular base with the universal AMPS hole pattern. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and fits a wide range of RAM Mount and third-party holders. This package includes hardware for rails with a diameter of 0.50" to 1.25". A composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is equipped with the patented RAM system featuring a 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for virtually infinite adjustability and perfect viewing angles.

€69.03*incl. VAT

€57.05excl. VAT

RAM® heavy duty drill-down mount for weBoost

RAM® heavy duty drill-down mount for weBoost

The RAM® heavy duty drill-down mount for weBoost (RAM-451-B-238U) is a mounting kit with a C-size ball with a 3/8"-24 x .625" threaded hole compatible with the weBoost antenna, a C-size short socket arm and a C-size RAM® diamond ball base for drill-down mounting on a flat surface such as a rear bumper, spare wheel carrier or antenna bracket. The adjustability of the RAM® Mounts system lets you fold the antenna down when not in use and extend the reach of the weBoost antenna when mounted in a tight space. This weBoost antenna mount is compatible with the Drive Reach OTR and Drive X antennas, making it the ideal mounting solution for off-road vehicles and trucks.

€81.00*incl. VAT

€66.94excl. VAT

RAM® high-strength composite suction cup double ball mount

RAM® high-strength composite suction cup double ball mount

The RAM® high-strength composite suction cup double ball mount (art. RAP-B-148U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The suction cup mount attaches with a strong suction cup to a smooth surface such as a window or dashboard and connects to a holder via the RAM® ball-and-socket system. This lets you mount a device quickly and without drilling.Attachment without drilling on smooth surfacesPart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

€46.43*incl. VAT

€38.37excl. VAT

RAM® holder for Bosch – medium

RAM® holder for Bosch – medium

This kit includes one 6" double socket arm for C size, 1.5" balls and two rail bases for Bosch and various rails.

€145.74*incl. VAT

€120.45excl. VAT

RAM® Holder for Bosch – Short

RAM® Holder for Bosch – Short

The RAM Mounts holder for Bosch (short) is a mounting holder for Bosch devices.The short RAM holder is tailored to the attachment of Bosch equipment and connects via the RAM ball system to a matching base for a secure, adjustable mount. Ideal for use in vehicles, machinery and material handling.RAM holder for Bosch, short versionFor mounting Bosch devicesBrand: RAM Mounts

€136.90*incl. VAT

€113.14excl. VAT

RAM® holder with 1/4"-20 threaded pin and 1/4"-20 threaded hole

RAM® holder with 1/4"-20 threaded pin and 1/4"-20 threaded hole

The RAM-B-348-A-237U consists of a 1" ball base with 1/4"-20 male thread for cameras, a short double socket arm and a 1" ball base with 1/4"-20 female thread. The male thread fits most standard female threads of cameras and camcorders on the bottom of the device.

€55.28*incl. VAT

€45.69excl. VAT

RAM® horizontal 6" swing arm mount with ball-and-socket round plate

RAM® horizontal 6" swing arm mount with ball-and-socket round plate

This set includes a through-bolt horizontal base, a 6-inch swing arm and a 1.5-inch diameter ball with a 2.5-inch mounting plate featuring the industry-standard AMPS hole pattern.

€138.07*incl. VAT

€114.11excl. VAT

RAM® horizontal 6" swing arm mount with fixed ball-and-socket connection

RAM® horizontal 6" swing arm mount with fixed ball-and-socket connection

The RAM-109H-3BU consists of a raised 6" swing arm with a 2.5" round plate with AMPS hole pattern and a through-bolt base for horizontal surfaces. This set includes the fixed swing arm, which means the socket cannot be rotated.

€187.94*incl. VAT

€155.32excl. VAT

RAM® horizontal swivel mount with 100x100mm VESA plate

RAM® horizontal swivel mount with 100x100mm VESA plate

The RAM® horizontal swivel mount with 100x100mm VESA plate (art. RAM-D-162H-MC2) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The socket arm connects two balls and lets you adjust the angle and position of the device continuously; with the clamp knob you lock everything vibration-proof.With standardised VESA bolt patternFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-162H-MC2Original RAM® Mounts part.

€515.06*incl. VAT

€425.67excl. VAT

RAM® large fuel tank mount with diamond plate

RAM® large fuel tank mount with diamond plate

The RAM fuel tank base is a compact way to get a unique perspective with your camera or to mount your electronic device in a quickly accessible spot. This powder-coated aluminium base mounts directly onto the original fuel tank of the listed compatible motorcycles. The hardware required to mount onto the filler opening is also included. Included is the B-size 1" ball on a diamond plate to mount RAM GPS holders or any other holder with the diamond connection.

€99.52*incl. VAT

€82.25excl. VAT