To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Universele houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

471 products found

RAM® double ball yoke clamp mount with diamond plate - medium

RAM® double ball yoke clamp mount with diamond plate - medium

The RAM-B-121-238U consists of a yoke clamp base, a standard length double socket arm and a 2.43" x 1.31" diamond base. The yoke clamp base fits rails from 0.625" up to a maximum of 1.25" diameter. The 1" rubber ball sits at a right angle to the plane of the mount; when connected to a rail the ball is parallel to the rail. The diamond base has two holes 1.912" on center, matches the industry standard AMPS hole pattern and fits a large number of RAM Mount holders and third-party holders. The mount is designed with a patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€87.36*incl. VAT

€72.20excl. VAT

RAM® double ball yoke clamp mount with diamond plate – short

RAM® double ball yoke clamp mount with diamond plate – short

The RAM-B-121U-A-238 consists of a yoke clamp base, a SHORT double socket arm and a 2.43" x 1.31" diamond base. The yoke clamp base fits rails from 0.625" up to 1.25" in diameter. The 1" rubber ball sits perpendicular to the face of the mount; when attached to a rail the ball sits parallel to the rail. The diamond base has two holes 1.912" centre-to-centre, matches the industry-standard AMPS hole pattern and connects to a large number of RAM Mount and third-party cradles. The mount is fitted with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€84.82*incl. VAT

€70.10excl. VAT

RAM® double ball yoke clamp mount with round plate - medium

RAM® double ball yoke clamp mount with round plate - medium

The RAM-B-121-202U consists of a yoke clamp base, a standard length double socket arm and a round 2.5" base with the universal AMPS hole pattern. The yoke clamp base fits rails from 0.625" up to a maximum of 1.25" diameter. The 1" rubber ball sits at a right angle to the plane of the mount; when connected to a rail the ball is parallel to the rail. The mount is designed with a patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€89.47*incl. VAT

€73.94excl. VAT

RAM® double ball yoke clamp mount with round plate - short

RAM® double ball yoke clamp mount with round plate - short

The RAM-B-121-A-202 consists of a yoke clamp base, a SHORT double socket arm and a round 2.5" base with the universal AMPS hole pattern. The yoke clamp base fits rails from 0.625" up to a maximum of 1.25" diameter. The 1" rubber ball sits at a right angle to the plane of the mount; when connected to a rail the ball is parallel to the rail. The mount is designed with a patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€91.50*incl. VAT

€75.62excl. VAT

RAM® double ball yoke clamp mount with round plate – long

RAM® double ball yoke clamp mount with round plate – long

The RAM-B-121U-C consists of a yoke clamp base, a LONG double socket arm and a round 2.5" base with the universal AMPS hole pattern. The yoke clamp base fits rails from 0.625" up to 1.25" in diameter. The 1" rubber ball sits perpendicular to the face of the mount; when attached to a rail the ball sits parallel to the rail. The mount is fitted with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€104.24*incl. VAT

€86.15excl. VAT

RAM® double diamond plate mount – C size long

RAM® double diamond plate mount – C size long

The RAM-102U consists of a long-length double socket arm as well as two diamond plates with the universal 2-hole AMPS pattern.

€124.16*incl. VAT

€102.61excl. VAT

RAM® double diamond plate mount – C size medium

RAM® double diamond plate mount – C size medium

The RAM-102U consists of a medium-length double socket arm as well as two diamond plates with the universal 2-hole AMPS pattern.

€86.38*incl. VAT

€71.39excl. VAT

RAM® double double-ball mount with 100x100mm VESA plate

RAM® double double-ball mount with 100x100mm VESA plate

This kit includes a long and a medium double socket arm for RAM 1.5 inch balls, a universal marine mounting plate and on top a 4.75 square plate with a 75 mm and 100 mm hole spacing.

€237.84*incl. VAT

€196.56excl. VAT

RAM® double straight magnetic tilt mount

RAM® double straight magnetic tilt mount

The RAM® double straight magnetic tilt mount (RAP-101-PV4-2S-NK-MAG88U) is a double-hinged magnetic mounting solution. One end features both 2-hole and 4-hole AMPS patterns to easily install any RAM® holder or GDS® dock, while the other end has the RAM® Tough-Mag™ magnetic base. This solution uses toothed lock washers that allow users to tilt their device up to 180 degrees per hinge point and uses a barrel nut instead of traditional adjustment knobs for tamper resistance, ideal for busy environments. The RAM® Tough-Mag™ base features 10 industrial-strength N52-grade magnets that adhere to any ferrous metal surface, and a rubber coating that protects the metal surface you attach to.

€143.43*incl. VAT

€118.54excl. VAT

RAM® double straight magnetic tilt mount with knob

RAM® double straight magnetic tilt mount with knob

The RAM® double straight magnetic tilt mount with knob (RAP-101-PV4-2S-MAG88U) is a double-hinged magnetic mounting solution. One end features both 2-hole and 4-hole AMPS patterns to easily install any RAM® holder or GDS® dock, while the other end has the RAM® Tough-Mag™ magnetic base. This solution uses toothed lock washers and extended knobs at each hinge point that allow users to adjust their device up to 180 degrees per hinge point for the ideal viewing angle. The RAM® Tough-Mag™ base features 10 industrial-strength N52-grade magnets that adhere to any ferrous metal surface, and a rubber coating that protects the metal surface you attach to.

€159.26*incl. VAT

€131.62excl. VAT

RAM® double straight tilt mount

RAM® double straight tilt mount

The RAM® double straight tilt mount (RAP-101-PV4-2S-NKU) is a double-hinged drill-down mounting solution. Each end features 2-hole and 4-hole AMPS patterns to easily install any RAM® holder or GDS® dock and attach the mount to any surface. This solution uses toothed lock washers that allow users to tilt their device up to 180 degrees per hinge point and uses a barrel nut instead of traditional adjustment knobs for tamper resistance, ideal for busy environments.

€58.75*incl. VAT

€48.55excl. VAT

RAM® double straight tilt mount with knob

RAM® double straight tilt mount with knob

The RAM® double straight tilt mount with knob (RAP-101-PV4-2SU) is a double-hinged drill-down mounting solution. Each end features 2-hole and 4-hole AMPS patterns to easily install any RAM® holder or GDS® dock and attach the mount to any surface. This solution uses toothed lock washers and extended knobs at each hinge point that allow users to adjust their device up to 180 degrees per hinge point for the ideal viewing angle.

€73.06*incl. VAT

€60.38excl. VAT

RAM® double U-bolt mount with 3/8"-16 threaded stud

RAM® double U-bolt mount with 3/8"-16 threaded stud

The RAM-101U-TB2 consists of a medium-length double socket arm, a 3/8"-16 threaded stud and a double U-bolt base for rails of 1" - 1.25" in diameter.

€108.19*incl. VAT

€89.41excl. VAT

RAM® double U-bolt mount with backrest for ATVs

RAM® double U-bolt mount with backrest for ATVs

The RAM-101U-235Z-BR1 consists of a double socket arm, a double U-bolt base that fits tubes from 1" to 1.25" in diameter and a backrest pad for ATVs. The mount incorporates a patented rubber ball-and-socket system with a 1.5" diameter, with adjustment points at both socket ends of the arm.

€204.72*incl. VAT

€169.19excl. VAT

RAM® double U-bolt mount with backrest for ATVs – C size medium

RAM® double U-bolt mount with backrest for ATVs – C size medium

The RAM-101U-D-235Z-BR1 consists of a long double socket arm, a double U-bolt base that fits rails of 1" to 1.25" in diameter and a backrest pad for ATVs. The mount incorporates a patented rubber ball-and-socket system with a 1.5" diameter, with adjustment points at both socket ends of the arm.

€238.26*incl. VAT

€196.91excl. VAT

RAM® double U-bolt mount with double ball adapter

RAM® double U-bolt mount with double ball adapter

This kit includes a short double socket arm connected via a double ball adapter to a medium double socket arm. At the bottom is our double U-bolt base in C size and at the top our 1.5 inch ball with a 2.5 inch AMPS mounting plate.

€189.01*incl. VAT

€156.21excl. VAT

RAM® double U-bolt rail mount for larger rails

RAM® double U-bolt rail mount for larger rails

The RAM-101U-235-1 consists of a 6-inch double socket arm, one round base with a 2.5" diameter featuring the universal AMPS hole pattern and a stainless steel double U-bolt base that fits tubes from 1.25" to 1.5" in diameter. The mount incorporates a patented rubber ball-and-socket system with a 1.5" diameter, with adjustment points at both socket ends of the arm. The rubber ball-and-socket technology allows virtually infinite adjustment and perfect viewing angles.

€111.48*incl. VAT

€92.13excl. VAT

RAM® double U-bolt rail mount for larger rails with diamond plate

RAM® double U-bolt rail mount for larger rails with diamond plate

The RAM® double U-bolt rail mount for larger rails with diamond plate (RAM-138U-235-1) includes everything you need to attach a RAM® device holder to rails with a diameter of 1.25" to 1.5". The base is made of double stainless steel for durability and reliability in the most demanding environments. The included rubber caps for the U-bolts are anti-snag, ideal for busy or industrial environments.

€109.78*incl. VAT

€90.73excl. VAT

RAM® double U-bolt rail mount for smaller rails – C-size short

RAM® double U-bolt rail mount for smaller rails – C-size short

The RAM-101U-B-235 consists of a short double socket arm, one round base with a 2.5" diameter featuring the universal AMPS hole pattern and a stainless steel double U-bolt base that fits tubes from 1" to 1.25" in diameter. The mount incorporates a patented rubber ball-and-socket system with a 1.5" diameter, with adjustment points at both socket ends of the arm. The rubber ball-and-socket technology allows virtually infinite adjustment and perfect viewing angles.

€111.47*incl. VAT

€92.12excl. VAT

RAM® double U-bolt rail mount for smaller rails with diamond plate

RAM® double U-bolt rail mount for smaller rails with diamond plate

The RAM® double U-bolt rail mount for smaller rails with diamond plate (RAM-138U-235) includes everything you need to attach a RAM® device holder to rails with a diameter of 1" to 1.25". The base is made of double stainless steel for durability and reliability in the most demanding environments. The included rubber caps for the U-bolts are anti-snag, ideal for busy or industrial environments.

€113.01*incl. VAT

€93.40excl. VAT

RAM® double U-bolt rail mount with round AMPS plate

RAM® double U-bolt rail mount with round AMPS plate

The RAM® double U-bolt rail mount with round AMPS plate (art. RAM-D-254-C-235U) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This clamp or U-bolt base clamps around a bar, handlebar or rail and provides a solid ball mounting point without needing to drill.Clamp mounting without drillingFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-254-C-235UOriginal RAM® Mounts part.

€205.62*incl. VAT

€169.93excl. VAT

RAM® double-ball mount with two RAM® Twist-Lock™ suction cup bases

RAM® double-ball mount with two RAM® Twist-Lock™ suction cup bases

The RAM-333-102-KRA1 consists of a medium length B size arm with two 2.5" diameter round plates with universal AMPS hole pattern, two Twist-Lock suction cup bases and a set of #8-32 machine screws and nuts.

€142.07*incl. VAT

€117.41excl. VAT

RAM® drill-down heavy duty holder for Starlink Mini

RAM® drill-down heavy duty holder for Starlink Mini

The RAM® drill-down heavy duty holder for Starlink Mini (RAM-138-B-STA1U) features a custom-made RAM® adapter, a short double socket arm and a flat ball base to drill onto any flat surface (mounting hardware not included). With the RAM® ball-and-socket system you can securely position your Starlink Mini at the recommended horizontal angle of 8° for optimal satellite performance. Made from marine-grade powder-coated aluminium and high-quality composite materials, this kit is designed to withstand harsh conditions, making it as versatile as you need. The modular, fully adjustable RAM® system enables quick installation, easy repositioning and effortless removal, so you can safely store your Starlink Mini when not in use. Whether you're off-grid, on the move or setting up a remote workspace, this complete mounting solution for the Starlink Mini gives you the flexibility and durability to stay connected wherever you go.

€115.02*incl. VAT

€95.06excl. VAT

RAM® drill-down heavy-duty mount for weBoost

RAM® drill-down heavy-duty mount for weBoost

This weBoost mounting kit includes a 3/8"-24 x 0.375" RAM® Tough-Ball™ with thread that screws into the thread adapter of the weBoost antenna, a short cup arm in C size and a RAM® diamond ball base in C size for drill-down mounting on a flat surface such as a rear bumper, spare wheel carrier or antenna bracket. Thanks to the adjustability of the RAM® Mounts system, you can fold the antenna down when it is not in use and extend the reach of the weBoost antenna when it is mounted in a tight space. This weBoost antenna mount is compatible with the Drive Reach OTR and Drive X antennas, making it the ideal mounting solution for off-road vehicles and trucks.

€93.52*incl. VAT

€77.29excl. VAT