Universele houders
471 products found
RAM® drill-mount holder with single socket arm & large round plate
The RAM-D-112-D consists of a round base of 3.68" diameter, a socket arm and a plate for downriggers.
€361.91*incl. VAT
€299.10excl. VAT
RAM® drill-mountable holder with steel-reinforced large round plate
The RAM® drill-mountable holder with steel-reinforced large round plate (art. RAM-D-112-D-IN1) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchoring point of a RAM® setup and is combined with ball, arm and holder into a sturdy whole.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-112-D-IN1Original RAM® Mounts part.
€371.63*incl. VAT
€307.13excl. VAT
RAM® dual ball holder with 9mm angled bolt head adapter
The RAM-B-180U consists of a 1" diameter ball base with 9mm hole, double socket arm and diamond base adapter. This holder is often used on motorcycles, attached to the mirror frame, usually found on BMW motorcycles. The 2.43" x 1.31" diamond base features two holes at 1.912" centre-to-centre, matches the industry-standard AMPS hole pattern and fits a wide range of RAM holders and third-party holders. The holder is designed with a patented RAM ball-and-socket system with 1" diameter rubber ball, with adjustment points at both ends of the double socket arm; this provides virtually infinite adjustment and perfect viewing angles.
€62.38*incl. VAT
€51.55excl. VAT
RAM® EZ-On/Off™ bike holder with swivel base adapter and mounting hardware
The RAP-274-1HU consists of the EZ-ON/OFF™ double strap base and swivel diamond adapter base. Adjust the cable ties to attach to various rails, from a minimum of 0.5" diameter. With a press on the diamond adapter, the EZ-ON/OFF™ system allows quick disconnection of the diamond adapter from the base. When connected, the diamond base can swivel to your optimal viewing position. The hole pattern on the diamond adapter fits a wide variety of RAM Mount and third-party holders, including those with the industry-standard AMPS hole pattern. Included is mounting hardware that attaches all RAM holders with an AMPS 2-hole diamond hole pattern to the RAP-274-1HU.
€25.37*incl. VAT
€20.97excl. VAT
RAM® EZ-On/Off™ bike mount
The RAP-274-1U consists of the RAM® EZ-ON/OFF™ double strap base and rotating diamond adapter. Adjust the cable ties for mounting on various rails, from a minimum of .5" diameter. With a press on the diamond adapter, the RAM® EZ-ON/OFF™ system allows quick release of the diamond adapter from the base. When connected, the diamond base can rotate to your desired position. The hole pattern on the diamond adapter fits a large variety of RAM® components, including those with the industry-standard AMPS hole pattern.
€20.38*incl. VAT
€16.84excl. VAT
RAM® EZ-Strap™ rail mount with diamond base adapter
If you are looking for a mounting solution that is quick and easy and does not damage your handlebar, then this is it. Do not waste time looking for something better, because this is the best. The RAM EZ-Strap™ installs in seconds and grips tubes, square rails and irregular shapes like a python. This gem of a holder is ideally suited for smaller electronic devices such as iPods, iPhones, GPS and other similar devices. Attach devices to your motorcycle, bike, atv, golf cart and more. The RAM EZ-Strap™ is extremely strong and inexpensive. You will probably buy one for a friend and several for yourself. This addition to the RAM line of mounting products is sure to become a favourite. The RAM EZ-Strap™, with LONG double ball arm, can be cut to size for tubes, square rails and irregular shapes from 0.5" to 2.58" in diameter. The EZ-Strap™ holder attaches directly to RAM Mount holders with a hole pattern that matches the diamond adapter. The total length of the LONG arm adapter is 3". This holder rotates 180 degrees.
€28.54*incl. VAT
€23.59excl. VAT
RAM® EZ-Strap™ rail mount with double ball and diamond base adapter
If you're looking for a mounting solution that's quick and easy and won't damage your handlebar, this is it. Don't waste time searching for something better, because this is the best. The RAM EZ-Strap™ installs in seconds and grips tubes, square rails and irregular shapes like a python. This gem of a mount is ideally suited for smaller electronic devices such as iPods, iPhones, GPS and other similar devices. Attach devices to your motorcycle, bike, ATV, golf cart and more. The RAM EZ-Strap™ is extremely strong and affordable. You'll probably buy one for a friend and several for yourself. This addition to the RAM line of mounting products is sure to become a favourite. The RAM EZ-Strap™, with SHORT double ball arm, can be cut to size for tubes, square rails and irregular shapes from 0.5" to 2.58" in diameter. The EZ-Strap™ mount attaches directly to RAM Mount holders with a hole pattern that matches the diamond adapter. This mount rotates 180 degrees.
€28.05*incl. VAT
€23.18excl. VAT
RAM® EZ-Strap™ rail mount with quick release
The RAM® EZ-Strap™ rail mount with quick release (art. RAP-SB-187-326U-TWI) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The rail mount attaches with a strap or clamp around a rail or tube and couples via the RAM® ball-and-socket system to a holder. This lets you quickly mount a device on bars and railings without drilling.Attachment around rail or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.
€45.83*incl. VAT
€37.88excl. VAT
RAM® EZY-Mount™ quick-release adapter with 11mm bolt head adapter holder
The RAM-B-252-A-326U consists of a 2.25" x 0.875" base with 11mm hole, SHORT double socket arm and EZY-Mount™ quick-release adapter kit. The base is commonly used on motorcycles, attached to the mirror frame, the main brand being BMW. This part fits well on many handlebar clamp bolts with a washer (base is 5mm thick). The EZY-Mount™ adapter kit uses a quick-release connection between external and internal thread; these mounts are absolutely perfect for anyone who wants the most secure, yet quick to release and portable kit possible. How does it work? Couple an EZY-Mount™ component with external or internal thread to any RAM holder or device with the standard AMPS hole pattern. Align the two parts and click them into place. To release, push the release tab back and continue. The mount is designed with a patented RAM ball-and-socket system with 1" diameter rubber ball, with adjustment points at both ends of the double socket arm; this ensures virtually infinite adjustment and perfect viewing angles.
€63.40*incl. VAT
€52.40excl. VAT
RAM® EZY-Mount™ quick-release adapter with 9mm bolt head adapter mount
The RAM® EZY-Mount™ quick-release adapter with 9mm bolt head adapter mount (art. RAM-B-272-A-326U-TWI) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.This adapter connects various RAM® components to each other, thereby expanding the mounting possibilities of the ball-and-socket system.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-272-A-326U-TWIOriginal RAM® Mounts part.
€73.28*incl. VAT
€60.56excl. VAT
RAM® EZY-Mount™ quick-release adapter with brake/clutch reservoir mount
The RAM® EZY-Mount™ quick-release adapter with brake/clutch reservoir mount (art. RAM-B-309-7-A-326U) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.This adapter connects various RAM® components to each other, thereby expanding the mounting possibilities of the ball-and-socket system.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-309-7-A-326UOriginal RAM® Mounts part.
€81.06*incl. VAT
€66.99excl. VAT
RAM® Flex-Arm™ holder with two diamond plates
The RAP-105-6DDU consists of two high-strength composite diamond plates separated by a 6" flex arm. The ends are permanently connected to the flex arm ends. The diamond plate fits the RAM plastic holders (HOL series).
€22.45*incl. VAT
€18.55excl. VAT
RAM® flexible adhesive double ball mount with AMPS plate
The RAP-B-378-A-347U consists of the flexible adhesive base with 1" ball, dual socket arm and square adapter base with the universal AMPS hole pattern. With a PSA adhesive pad, you can place the flexible adhesive mount virtually anywhere you want to keep your portable electronics clearly visible and always within reach. Thanks to its very small footprint, it easily finds a place on your scooter, motorcycle, kayak, boat or dashboard. The square adapter base contains four pre-drilled holes in each corner, forming the universal AMPS hole pattern of 1.5 x 1.188 (hole spacing). The mount features a patented RAM® 1" diameter rubber ball-and-socket system, with adjustment points at both ends of the dual socket arm; this provides virtually infinite adjustability and perfect viewing angles.
€47.08*incl. VAT
€38.91excl. VAT
RAM® flexible adhesive double ball mount with diamond plate - B size medium
The RAP-B-378-238U consists of the flexible adhesive base with 1" ball, dual socket arm in STANDARD size and diamond base adapter. With a PSA adhesive pad, you can place the flexible adhesive mount virtually anywhere you want to keep your portable electronics clearly visible and always within reach. Thanks to its very small footprint, it easily finds a place on your scooter, motorcycle, kayak, boat or dashboard. By attaching the patented 1" rubber ball to one of the many RAM® arms, you create the ultimate socket system with multiple adjustment points for movement and perfect viewing angles.
€51.05*incl. VAT
€42.19excl. VAT
RAM® Glare Shield clamp double ball mount with AMPS hole pattern
The RAM-B-177-347U consists of a glare shield clamp base, short double socket arm and 2" x 1.7" rectangular base with the universal AMPS hole pattern. This mount is designed for attachment to the edge of a flat surface up to 5/8" thick. Popular mounting edges are the window edge on the side of a car or the glare shield in an aircraft. The base has two composite bolts that, when tightened, clamp the base to the edge surface. A RAM 1" diameter rubber ball is connected to the base, so you can attach a RAM 1" diameter arm socket and connecting plates to create the perfect mount for your application. The mount is equipped with the patented RAM system featuring a 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for virtually infinite adjustability and perfect viewing angles.
€83.76*incl. VAT
€69.22excl. VAT
RAM® Glare Shield clamp double ball mount with round plate
The RAM-B-177-202U consists of a glare shield clamp base, short double socket arm and round base with the universal AMPS hole pattern. This mount is designed for attachment to the edge of a flat surface up to 5/8" thick. Popular mounting edges are the window edge on the side of a car or the glare shield in an aircraft. The base has two composite bolts that, when tightened, clamp the base to the edge surface. A RAM 1" diameter rubber ball is connected to the base, so you can attach a RAM 1" diameter arm socket and connecting plates to create the perfect mount for your application. The mount is equipped with the patented RAM system featuring a 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for virtually infinite adjustability and perfect viewing angles.
€84.58*incl. VAT
€69.90excl. VAT
RAM® Glare Shield clamp mount
The RAM-B-177-C consists of a glare shield clamp base, short double socket arm and diamond base adapter. This holder is designed for mounting on the edge of a flat surface up to 5/8" thick. Popular mounting edges are the window edge on the side of a car or the glare shield in an aircraft. The base has two composite bolts that, when tightened, clamp the base to the edge surface. The 2.43" x 1.31" diamond base contains two holes at 1.912" centre-to-centre, matches the industry-standard AMPS hole pattern and fits a wide range of RAM Mount and third-party holders. The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles.
€105.91*incl. VAT
€87.53excl. VAT
RAM® Glare Shield clamp mount with diamond plate
The RAM-B-177U consists of a glare shield clamp base, short double socket arm and diamond base adapter. The RAM-B-177U is designed for attachment to the edge of a flat surface up to 5/8" thick. Popular mounting edges are the window edge on the side of a car or the glare shield in an aircraft. The base has two composite bolts that, when tightened, clamp the base to the edge surface. A RAM 1" diameter rubber ball is connected to the base, so you can attach a RAM 1" diameter arm socket and connecting plates to create the perfect mount for your application. The hole pattern on the diamond base adapter fits most RAM holders.
€82.41*incl. VAT
€68.11excl. VAT
RAM® Glare Shield clamp mount with round plate
The RAM-B-177-C-202 consists of a glare shield clamp base, long double socket arm and round base with the universal AMPS hole pattern. This mount is designed for attachment to the edge of a flat surface up to 5/8" thick. Popular mounting edges are the window edge on the side of a car or the glare shield in an aircraft. The base has two composite bolts that, when tightened, clamp the base to the edge surface. A RAM 1" diameter rubber ball is connected to the base, so you can attach a RAM 1" diameter arm socket and connecting plates to create the perfect mount for your application. The mount is equipped with the patented RAM system featuring a 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for virtually infinite adjustability and perfect viewing angles.
€108.23*incl. VAT
€89.45excl. VAT
RAM® glareshield clamp mount with rear-view mirror
The RAM-B-126 consists of a glareshield clamp base, dual cup arm and a 7" x 14" mirror. This holder is designed to mount to the lip edge of a flat surface up to 5/8" thick. The base has two composite bolts that, when tightened, clamp the base onto the lip surface. A 1" diameter RAM rubber ball is connected to the base, so you can attach a 1" diameter RAM cup arm and connecting plates to create the perfect mount for your application. The holder is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the dual cup arm, allowing near-infinite adjustability and perfect viewing angles.
€216.69*incl. VAT
€179.08excl. VAT
RAM® handlebar clamp mount with M8 bolts and round plate – medium
Your motorcycle rides on rubber tyres for grip and to smooth the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, a turn of a single knob grips the adjustment arm onto a rubber ball designed to absorb shocks and vibrations. With RAM products it is all grip and no slip, plus protection for your valuable electronics. Simply place our easy-to-install ball base on the top clamp of your motorcycle handlebar and you are ready. After that a world of mounting possibilities opens up to you. The round base contains a 1" diameter rubber ball connected to a 2.5" diameter flat base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
€59.05*incl. VAT
€48.80excl. VAT
RAM® handlebar clamp mount with M8 bolts and round plate – short
Your motorcycle rides on rubber tyres for grip and to smooth the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, a turn of a single knob grips the adjustment arm onto a rubber ball designed to absorb shocks and vibrations. With RAM products it is all grip and no slip, plus protection for your valuable electronics. Simply place our easy-to-install ball base on the top clamp of your motorcycle handlebar and you are ready. After that a world of mounting possibilities opens up to you. The round base contains a 1" diameter rubber ball connected to a 2.5" diameter flat base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
€56.06*incl. VAT
€46.33excl. VAT
RAM® handlebar U-bolt composite double ball mount with Diamond plate
The RAM® handlebar U-bolt composite double ball mount with Diamond plate (art. RAP-B-102-231ZU) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device so it can be integrated into the RAM® ball-and-socket system. This lets you connect various components flexibly and vibration-free.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible connection of base and holderOriginal RAM Mounts part.
€55.13*incl. VAT
€45.56excl. VAT
RAM® handlebar U-bolt composite double ball mount with round plate
The RAM® handlebar U-bolt composite double ball mount with round plate (art. RAP-B-101-231-OT1U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device so it can be integrated into the RAM® ball-and-socket system. This lets you connect various components flexibly and vibration-free.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible connection of base and holderOriginal RAM Mounts part.
€59.54*incl. VAT
€49.21excl. VAT