Safety

Audio warning Loud enough to be heard from within the corner zone and set it apart from other background noisesAudio volume can be adjusted (high/low) or simply turned off (on/off)Sounds warning ONLY when motion is detected on both sides of the cornerSynchronized with light flash to reinforce warningVisual warning Flashes warning ONLY when motion is detected on both sides of the cornerLED lights positioned on the angle, increasing the intensity of the light and optimizing visibilityBeam focused toward areas where it is best seenLens concentrates and increases beam’s intensitySimple installation Deploys immediately, portable, compact and lightweightIntegrated, recessed magnet mounts easily“snap on” to racking, maintaining a secure, tight fitIntegrated mounting points for mounting the unit to non-magnetic surfacesOptimal installation height is 7 to 9 feet on the uprightSelf-powered Standard D-cell batteries (included) Blue light low battery indicator Battery life depends on usage, but lasts a minimum of 12 monthsPassive infrared motion sensorsDetection zone 20-25 feet in each directionWarning set in ample time for corrective action Pre-set and ready to use

IMPROVES SAFETY WHEN MOVING LOADSEven your best drivers have problems judging the tilt of their forks when entering or exiting pallets. The risk of pallets mistakenly being pushed or pulled off of a rack or stack is significant. OSHA requires level forks when lifting people on a safety platform. Take control of these problems, by making a fork level indicator part of your driver safety equipment. REDUCES DAMAGES TO PRODUCTS, PALLETS AND RACKS The main cause of product, rack and equipment damage is forks tilted at the wrong angle. lf the forks are not level, drivers can spear product from inside or above the pallet opening, bend or push over racking, and splinter pallet s. The Flat Fork will quick ly pay for itself through le ss dama ges.INCREASES PRODUCTIVITY : WORK IS EASIER AND FASTER Drivers rarely admit it, but they spend a lot of time through trial and error trying to pull and place pallets when werking with elevated leads. Flat Fork makes that work go quickly, and will also show a driver the correct fork angle when traveling with a load or when parking.

The down safety valve PA4HM3H11310 is designed to ensure controlled descent in hydraulic systems. It prevents sudden drops, ensuring safe operation and system integrity.

Our ESQOspeed Radar Ceiling Detection SpeedZoner is an assistance system that automatically reduces the speed of a vehicle as soon as it goes inside, by means of detecting the ceiling of the building*. The system actions the speed limiter of the vehicle by selecting the switchable conditional speed.As long as the radar signal is not bounced, the speed limitation is inactive.As soon as the ceiling of the structure is detected the turtle speed will be selected until the machine goes outside again. * Maximum distance 24 meters from the sensor on top of the head guard to the ceiling. Specifications : IP67 Environmental rating Operating temperature : - 40° to + 65°C (- 40°F to + 149°F) Supply voltage : 12 or 24 V. DC Range from : 2 to 24 meter Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication band Frequency modulated continuous (FMCW) radar

Our ESQOspeed Radar Ceiling Detection SpeedZoner is an assistance system that automatically reduces the speed of a vehicle as soon as it goes inside, by means of detecting the ceiling of the building*. The system actions the speed limiter of the vehicle by selecting the switchable conditional speed.As long as the radar signal is not bounced, the speed limitation is inactive.As soon as the ceiling of the structure is detected the turtle speed will be selected until the machine goes outside again. * Maximum distance 24 meters from the sensor on top of the head guard to the ceiling. Specifications : IP67 Environmental rating Operating temperature : - 40° to + 65°C (- 40°F to + 149°F) Supply voltage : 12 or 24 V. DC Range from : 2 to 24 meter Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication band Frequency modulated continuous (FMCW) radar

Cone Unicart - Includes 9 x Standard 75cm cones , 9 x Skipper units, & 1 Accessory Pack

Includes 6 x Standard 75cm cones, 6 x Skipper units & 1 x Accessory Pack

Fully loaded Skipper Traffic Cone Unicart - includes 6 x Skipper cones, 6 x Skipper units & 1 x Accessory Pack

Connector M12 to connect IRIS sensor to third-party accessory devices such as additional RGB LED-in-cab light, backchat, speed restriction, ...

Alternative replacement part for LINDE 7918915237 Buzzer

Convenient magnetic clip designed to securely hold remote controls or receivers on forklifts or equipment. Easy to attach, detach, and access.

This pallet truck stopper is suitable for keeping pallet trucks in place when not in use. It is especially ideal during transport. The pump truck stopper is lightweight but designed for heavy-duty use during transport thanks to its strong plastic construction.The pallet truck stopper works on any surface in the loading space and won't slide thanks to the six rubber caps on the bottom, which enhance grip on the loading floor. To use the stopper, simply lift it by the handles and place it into position. The steering wheels should be placed on the inclined section, specially designed for this purpose, which prevents the pallet truck from rolling away. The pallet truck stopper is not only suitable for transport – it's also ideal for neatly arranging pallet trucks in your warehouse.

A versatile post designed for the Skipper range of products. Can be used indoors or outdoors. Fill base with water or sand for extra stability. 

A versatile post designed for the Skipper range of products. Can be used indoors or outdoors. Fill base with water or sand for extra stability. 

A versatile post designed for the Skipper range of products. Can be used indoors or outdoors. Fill base with water or sand for extra stability. 

IRIS 860 USB Configuration Cable 2m To connect to an IRIS sensor allowing sensor setting such as detection distance, range, sensitivity, direction and buzzer volume. 

Skipper Wall Mount Bracket – Secure Mounting for Skipper Units The Skipper Wall Mount Bracket is an essential component for securely and reliably mounting Skipper units on vertical surfaces such as walls or fences. This robust and durable mounting mechanism ensures that the units stay in place even in busy or demanding work environments. Applications The Skipper Wall Mount Bracket is suitable for a wide range of machines and applications, including: Agricultural Vehicles: Ideal for use in agricultural areas where it is important to quickly create clear markings or boundaries. Construction Machines: Such as excavators, forklifts, and cranes, where it is necessary to clearly demarcate work areas. Industrial Equipment: Such as cranes, lifting devices, and other industrial machines working in dynamic environments. Events and Temporary Installations: At events and festivals where temporary marking and boundaries are crucial for crowd control and safety. Key Features Quality: Made from robust materials that ensure long-lasting and reliable performance. Easy Installation: The bracket is easy to install on various vertical surfaces such as walls or fences. Compatibility: Suitable for all Skipper units, ensuring secure attachment of marking systems. Durability: The strong design ensures that the bracket withstands impacts and demanding working conditions. Why Choose the Skipper Wall Mount Bracket? This wall mount bracket provides a simple and effective solution for mounting Skipper units on various surfaces. Its user-friendly design and the security it offers contribute to the efficiency of your marking and demarcation systems. Thanks to its robust construction and versatility, it is an essential tool for professionals working in both industrial and event environments. Choose the Skipper Wall Mount Bracket at JVD Parts and improve safety and visibility in your work area. Order today and benefit from fast delivery!

Sturdy and Reliable Wall Support from Skipper TMThe Skipper TM Wall Support Bracket is designed to provide maximum stability and durability for various applications. Made from high-quality material, this wall support ensures a secure attachment to walls, ideal for supporting shelves, pipes, or other constructions.Thanks to its robust design and easy installation, this wall support is perfect for both professional use and DIY projects. The Skipper TM Wall Support Bracket combines functionality with a sleek appearance, making it an essential accessory for any space.Made from durable and corrosion-resistant materialEasy to install with included fastenersSuitable for both indoor and outdoor useReliably supports heavy loadsEnhance your constructions with the reliable quality of Skipper TM and experience the difference in strength and safety.

Skipper TM XS Unit Orange with Red/White TapeThe Skipper TM XS Unit is a compact and durable solution for effectively marking zones and cordoning off areas in various environments. Equipped with a striking orange colour and red/white tape, this unit ensures maximum visibility and safety, even in busy or poorly lit spaces.This unit is ideal for use at events, construction sites, warehouses, and other locations where clear demarcation is essential. Thanks to its robust design and high-quality materials, the Skipper TM XS Unit is resistant to heavy use and weather conditions.With the Skipper TM XS Unit, you can quickly and easily mark and cordon off zones, contributing to an organised and safe working environment.

The Skipper A4 sign holder offers a professional solution for displaying important messages, safety notices, or directional signs. Designed for both indoor and outdoor use, this holder is compatible with Skipper’s safety management products and features a durable, stable base.