Chemical products

Novatio CLG-830 Cleany Gel 4L - Thorough cleaning with easeNovatio CLG-830 Cleany Gel is a powerful, user-friendly cleaning gel in a generous 4-litre pack. This high-quality gel is specially developed for efficiently removing dirt, grease and stubborn stains on various surfaces. Thanks to its gel-like structure, the product clings to vertical surfaces for a long time, which optimises the cleaning power.The Cleany Gel is ideal for professional use in both industrial and commercial environments where thorough and effective cleaning is essential. The product is easy to apply and provides fast and environmentally friendly cleaning without aggressive chemicals.Key features:Effective cleaning gel against stubborn dirt and greaseLong-lasting adhesion for optimal performance on vertical surfacesGenerous 4-litre pack, ideal for professional useEnvironmentally friendly and user-friendly

The NOVATIO CLS-850 Cleany Scrub 4L (art. VD464040000) is a Novatio cleaner / degreaser for forklifts and material handling.This Novatio product is a professional maintenance product for use in the workshop and internal transport. It supports cleaning, lubrication or maintenance of machines and parts.Professional Novatio maintenance productFor workshop, forklifts and material handlingAlso known under reference: CLS-850Original part for forklifts and material handling.

The Novatio Connector R1234yf is a connection coupling for using Novatio products with R1234yf air conditioning systems.With this connector you correctly connect the product to the R1234yf system for safe, leak-free treatment. A practical accessory for air conditioning maintenance of modern vehicles.Connection coupling for R1234yf systemsFor air conditioning maintenanceReference: R1234yf

The Novatio Connector R134a is a connection coupling for using Novatio products with R134a air conditioning systems.With this connector you correctly connect the product to the R134a system for safe, leak-free treatment. A practical accessory for air conditioning maintenance in the workshop.Connection coupling for R134a systemsFor air conditioning maintenanceReference: R134a

The Novatio Cover film 905 is a cover film on a roll (2 x 1,8 m, width 12,5 cm) for use in Novatio repair work.This film protects and covers repairs during curing or serves as a separating layer. Practical consumable for a neat finish during maintenance and repair.Cover film on a roll 2 x 1,8 mWidth 12,5 cmFor covering and protecting during repair

The Novatio Drain Tap 210L is a drain tap for Novatio drums of 210 litres.With this tap you draw off liquid products neatly and in a controlled way from the bulk packaging, without spilling. A practical accessory for workshop and warehouse when decanting maintenance products.Drain tap for 210 litre drumsFor neat dosing and decantingProfessional Novatio accessory

TRANSPARENT EPOXY GLUE IN HANDY PACKAGINGDuofix is a fast-curing, transparent, 2-component epoxy glue with extremely high adhesive strength. Duofix makes fast bonds and repairs possible, even at relatively low temperatures (+5°C).AdvantagesBonds most materials. Stable and filling. Easy to work after curing. The duo cartridge is resealable after use.Use Bring the components to an equal level. Attach the mixer tip and enlarge the spray opening if necessary. Apply to a clean and dry substrate. For storage: remove the mixer tip, clean the coupling system and close with the cap. Technical specifications Epoxy resin: Viscosity (25°C): 10 Pa.s . Flash point: >200°C. Density 20°C: 1.179 g/cm³. Hardener: Viscosity (25°C): 7 Pa.s. Flash point: 90°C. Density 20°C: 1.14 g/cm³. Mixing ratio: 1:1. Content 24 ml (2x12 ml). Base: epoxy resin. Colour: transparent. Curing: 25°C. Working time: 3 - 4 minutes. Initial reaction time: 9 -15 minutes. 50% strength: 2 h. 75% strength: 4 h. 100% strength: 3 days. Temperature resistance after curing: from -25°C to +120°C. Minimum application temp.: +5°C. Overpaintable: yes. Tensile strength DIN 53238 - steel C75, sandblasted, at 23°C: 25N/mm². Shelf life: 18 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORSFor electrical connections in applications where no compromises are allowed in terms of quality, reliability, service life and watertightness. Is extremely easy to install, the quality of the connection can be checked visually, and no special tools are needed for installation. Can be applied to braided, flexible conductors, both in copper and tinned versions. Heat-shrink polymer sleeve with two solder rings with integrated flux and two thermoplastic sealing rings inside.BenefitsWatertight connection of flexible conductors. Visual inspection of the connection through the transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as the Novaflame Multi Torch or a hot-air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the level of the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Composition: outer wall: radiation cross-linked, modified polyolefin. Solder rings: 2 rings Cd 18, 50 Sn, pb 32 % with integrated flux. Sealing rings: thermally stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 143°C. Temperature resistance: -60°C to +130°C. Breakdown voltage: > 600V. Protection rating against moisture: IP 68, remains usable underwater. SCIP no. Duoflux Clear: 5175c7fa-cb27-4aa3-9b7a-8771b0f065d5 SCIP no. Duoflux Red: 60ece7b4-d1f0-47bb-933b-c89d36cc687f SCIP no. Duoflux Blue: 4381664e-3e19-4aa2-bf1f-e2b157ac02de SCIP no. Duoflux Yellow: 5a517eab-20c1-41b4-92cd-dbb7b84f695b

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORSFor electrical connections in applications where no compromises are allowed in terms of quality, reliability, service life and watertightness. Is extremely easy to install, the quality of the connection can be checked visually, and no special tools are needed for installation. Can be applied to braided, flexible conductors, both in copper and tinned versions. Heat-shrink polymer sleeve with two solder rings with integrated flux and two thermoplastic sealing rings inside.BenefitsWatertight connection of flexible conductors. Visual inspection of the connection through the transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as the Novaflame Multi Torch or a hot-air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the level of the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Composition: outer wall: radiation cross-linked, modified polyolefin. Solder rings: 2 rings Cd 18, 50 Sn, pb 32 % with integrated flux. Sealing rings: thermally stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 143°C. Temperature resistance: -60°C to +130°C. Breakdown voltage: > 600V. Protection rating against moisture: IP 68, remains usable underwater. SCIP no. Duoflux Clear: 5175c7fa-cb27-4aa3-9b7a-8771b0f065d5 SCIP no. Duoflux Red: 60ece7b4-d1f0-47bb-933b-c89d36cc687f SCIP no. Duoflux Blue: 4381664e-3e19-4aa2-bf1f-e2b157ac02de SCIP no. Duoflux Yellow: 5a517eab-20c1-41b4-92cd-dbb7b84f695b

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORSFor electrical connections in applications where no compromises are permitted regarding quality, reliability, service life and watertightness. It is extremely easy to install, the quality of the connection can be checked visually, and no special tools are required for installation. Can be applied to braided (flexible) and solid (rigid) conductors, both for copper and tinned versions, whether or not in combination. Heat-shrink polymer tubing with two solder rings inside with integrated flux and two thermoplastic sealing rings.AdvantagesWatertight connection of flexible and rigid conductors. Visual inspection of the connection through transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as the Novaflame Multi Torch or a hot air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Composition: outer wall: radiation cross-linked, modified polyolefin. Solder rings: 2 rings Cd 18, 50 Sn, pb 32 % with integrated flux. Sealing rings: heat-stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 143°C. Temperature resistance: -60°C to +130°C. Breakdown voltage: > 600V. Moisture protection rating: IP 68, remains usable under water.

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORSFor electrical connections in applications where no compromises are permitted regarding quality, reliability, service life and watertightness. It is extremely easy to install, the quality of the connection can be checked visually, and no special tools are required for installation. Can be applied to braided flexible conductors, both for copper and tinned versions. Heat-shrink polymer tubing with two solder rings inside with integrated flux and two thermoplastic sealing rings.AdvantagesWatertight connection of flexible conductors. Visual inspection of the connection through transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as the Novaflame Multi Torch or a hot air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Composition: outer wall: radiation cross-linked, modified polyolefin. Solder rings: 2 rings Cd 18, 50 Sn, pb 32 % with integrated flux. Sealing rings: heat-stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 143°C. Temperature resistance: -60°C to +130°C. Breakdown voltage: > 600V. Moisture protection rating: IP 68, remains usable under water. SCIP no. Duoflux Clear: 5175c7fa-cb27-4aa3-9b7a-8771b0f065d5 SCIP no. Duoflux Red: 60ece7b4-d1f0-47bb-933b-c89d36cc687f SCIP no. Duoflux Blue: 4381664e-3e19-4aa2-bf1f-e2b157ac02de SCIP no. Duoflux Yellow: 5a517eab-20c1-41b4-92cd-dbb7b84f695b

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORSFor electrical connections in applications where no compromises are allowed in terms of quality, reliability, service life and watertightness. Is extremely easy to install, the quality of the connection can be checked visually, and no special tools are needed for installation. Can be applied to braided, flexible conductors, both in copper and tinned versions. Heat-shrink polymer sleeve with two solder rings with integrated flux and two thermoplastic sealing rings inside.BenefitsWatertight connection of flexible conductors. Visual inspection of the connection through the transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as the Novaflame Multi Torch or a hot-air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the level of the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Composition: outer wall: radiation cross-linked, modified polyolefin. Solder rings: 2 rings Cd 18, 50 Sn, pb 32 % with integrated flux. Sealing rings: thermally stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 143°C. Temperature resistance: -60°C to +130°C. Breakdown voltage: > 600V. Protection rating against moisture: IP 68, remains usable underwater. SCIP no. Duoflux Clear: 5175c7fa-cb27-4aa3-9b7a-8771b0f065d5 SCIP no. Duoflux Red: 60ece7b4-d1f0-47bb-933b-c89d36cc687f SCIP no. Duoflux Blue: 4381664e-3e19-4aa2-bf1f-e2b157ac02de SCIP no. Duoflux Yellow: 5a517eab-20c1-41b4-92cd-dbb7b84f695b

LEAD-FREE CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORS Consists of a heat-shrink polymer sleeve with two solder rings with integrated flux and two thermoplastic sealing rings inside. Was specially developed for making electrical connections, in applications where no compromises can be allowed in terms of quality, reliability, service life and watertightness of the connection. No special tools needed for installation. For application on braided, flexible conductors, both in copper and tinned versions, whether or not in combination.BenefitsWatertight connection of flexible conductors. Visual inspection of the connection through the transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as a hot-air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the level of the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Outer wall: radiation cross-linked, modified polyolefin. Solder rings: Sn42 Bi58 per ANSI/JSTD-006 with integrated flux. Sealing rings: thermally stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 138°C. Temperature resistance: -55°C to +125°C. Breakdown voltage: > 600V. Protection rating against moisture: IP 68, remains usable underwater. Shelf life: 60 months, dry, cool and frost-free.

LEAD-FREE CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORS Consists of a heat-shrink polymer sleeve with two solder rings with integrated flux and two thermoplastic sealing rings inside. Was specially developed for making electrical connections, in applications where no compromises can be allowed in terms of quality, reliability, service life and watertightness of the connection. No special tools needed for installation. For application on braided, flexible conductors, both in copper and tinned versions, whether or not in combination.BenefitsWatertight connection of flexible conductors. Visual inspection of the connection through the transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as a hot-air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the level of the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Outer wall: radiation cross-linked, modified polyolefin. Solder rings: Sn42 Bi58 per ANSI/JSTD-006 with integrated flux. Sealing rings: thermally stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 138°C. Temperature resistance: -55°C to +125°C. Breakdown voltage: > 600V. Protection rating against moisture: IP 68, remains usable underwater. Shelf life: 60 months, dry, cool and frost-free.

LEAD-FREE CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORS Consists of a heat-shrink polymer tubing with two solder rings inside with integrated flux and two thermoplastic sealing rings. Was specially developed for making electrical connections, in applications where no compromises can be made regarding quality, reliability, service life and watertightness of the connection. No special tools required for installation. For application on braided, flexible conductors, both for copper and tinned versions, whether or not in combination.AdvantagesWatertight connection of flexible conductors. Visual inspection of the connection through transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as a hot air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Outer wall: radiation cross-linked, modified polyolefin. Solder rings: Sn42 Bi58 per ANSI/JSTD-006 with integrated flux. Sealing rings: heat-stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 138°C. Temperature resistance: -55°C to +125°C. Breakdown voltage: > 600V. Moisture protection rating: IP 68, remains usable under water. Shelf life: 60 months, dry, cool and frost-free.

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORSFor electrical connections in applications where no compromises are allowed in terms of quality, reliability, service life and watertightness. Is extremely easy to install, the quality of the connection can be checked visually, and no special tools are needed for installation. Can be applied to braided, flexible conductors, both in copper and tinned versions. Heat-shrink polymer sleeve with two solder rings with integrated flux and two thermoplastic sealing rings inside.BenefitsWatertight connection of flexible conductors. Visual inspection of the connection through the transparent insulation. Temperature resistant from -60°C to 130°C.UseUse a heat source, such as the Novaflame Multi Torch or a hot-air blower (set to +350°C and fitted with a deflector). Slide the conductors into the Duoflux and press the solder rings flat to hold the Duoflux in place. Heat the Duoflux at the level of the solder rings until they flow evenly and then heat the ends so that the coloured rings insulate and seal perfectly. Allow to cool without moving. Wire diameter: Clear: from 0,2 mm to 0,7 mm Red: from 0,5 mm to 1,0 mm Blue: from 1,5 mm to 2,5 mm Yellow: from 3,0 mm to 6,0 mmTechnical specifications Composition: outer wall: radiation cross-linked, modified polyolefin. Solder rings: 2 rings Cd 18, 50 Sn, pb 32 % with integrated flux. Sealing rings: thermally stabilised thermoplastic. Voltage loss: < 0,002 V. Connection resistance: < 0,004 Ohm. Insulation resistance: > 10 Giga Ohm. Installation temperature: 143°C. Temperature resistance: -60°C to +130°C. Breakdown voltage: > 600V. Protection rating against moisture: IP 68, remains usable underwater. SCIP no. Duoflux Clear: 5175c7fa-cb27-4aa3-9b7a-8771b0f065d5 SCIP no. Duoflux Red: 60ece7b4-d1f0-47bb-933b-c89d36cc687f SCIP no. Duoflux Blue: 4381664e-3e19-4aa2-bf1f-e2b157ac02de SCIP no. Duoflux Yellow: 5a517eab-20c1-41b4-92cd-dbb7b84f695b

UNBLOCKING AND CLEANING OF DIESEL PARTICULATE FILTERS (DPF) WITHOUT DISMANTLING Novaflush DPF One is usable on heavily contaminated to fully blocked soot filters. Dismantling is unnecessary. It prevents and ends limp mode and restores the optimal performance of the DPF and catalytic converter. Always use Novaflush DPF One before Novaflush DPF Two by means of the Novaflush DPF Gun. BenefitsDeep cleaning of heavily contaminated DPF and catalytic converters Reduces fuel consumption and CO2/ NOx emissions Safe for all types of diesel engines Safe for ceramic and metal partsUseFit the Novaflush DPF Gun according to the processing guideline. Fill the reservoir with 750 ml Novaflush DPF One. Connect it to a compressed air line with a maximum pressure of 4 bar (58 PSI). Place the vehicle in a well-ventilated area. Let the exhaust system cool down to 40°C or lower (hand-warm). Higher temperatures reduce effectiveness. Place a collection tray under the exhaust to catch the dripping liquid. Remove the pressure sensor at the front of the soot particulate filter. Choose the most suitable nozzle for the application and insert it into the opening of the pressure sensor. Spray in the direction of the DPF, towards the rear. Empty the entire tank (750 ml) of Novaflush DPF One. Let Novaflush DPF One act for 30 minutes. Fill the reservoir of the DPF Gun with 750 ml Novaflush DPF Two and empty the entire contents of the tank in the direction of the DPF. Fill the reservoir of the DPF Gun with 750 ml clean water and empty the entire contents of the tank in the direction of the DPF. Now blow air through the exhaust system for 3 minutes, in the direction of the DPF. Fit the pressure sensor and start the vehicle. Let the engine idle for about 20 minutes. Then start a forced regeneration or take a test drive with progressively higher revs. It is normal for foam and/or white smoke to come out of the exhaust during this. Maintenance Novaflush DPF GunRinse the gun through with 250 ml water after each filter cleaning so that any residue of Novaflush DPF is removed. Store the dried gun in a dry and dust-free environment. Prevention and maintenance guidelinesThe result of the treatment can be maintained by adding Novafuel Powerkleen to the fuel to clean the injection and combustion circuit (stimulating the regeneration of the soot filter). Specifically for the maintenance of the DPF, Novafuel DPF Care is recommended.Technical specifications Form: red clear liquid. Odour: characteristic amine odour. pH: 11. Flash point: +95°C. Shelf life: 84 months, dry, cool and frost-free.

LUBRICANT FOR ASSEMBLY AND DISASSEMBLY Spray for all assembly and disassembly of synthetic materials, makes it easier to slide/pull cabling through conduits. Lubricant for all types of cables.AdvantagesEffective on all plastic parts, with or without sealing rubbers. Simplifies "pulling through" electrical cabling. Safe, fast-drying and virtually residue-free.Use Shake before use. Spray onto the application. Act immediately.Technical specifications Base: soap emulsion. Form: liquid. Colour: transparent-white. Melting point: 0°C. Boiling point: 100°C - 221 °C. pH value: 8. Flash point: 70°C. Auto-ignition: 255°C. Shelf life: 36 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

METAL PROTECTION BEFORE AND AFTER WELDINGWeld-through steel protection against rust. Easy to weld without spattering or burning away, with spot welding or semi-automatic. After painting, it forms perfect rust protection with optimal adhesion. Thanks to its fine composition, it is perfectly sprayable, with a spray pattern like that of a conventional spray gun.AdvantagesIdeal for welding without spattering. Optimal protection. Unique adhesion on steel and galvanised steel.Use After releasing the mixing ball, shake the can well before use. Apply to a clean and dry surface. If necessary, clean with Safety Clean and/or Multifoam. Apply only 1 thin covering layer. Spraying distance : 30 cm. After use, empty the nozzle by spraying with the can inverted. Respect the drying times. Easy Weld Primer is not a primer coat before painting. Before finishing with paint, apply a Novafill Flex primer.Technical specifications Composition: synthetic polyvinyl resins, iron oxides, silicates, aliphatic and aromatic hydrocarbons. Colour: red-brown. Appearance: matt. Viscosity: 17 sec. DIN4 (20°C). Solids: 72% (weight). Coverage: 7m²/can. Drying time at 23°C and 50% RH: dust-dry after 10 min. thumb-dry after 30 min. dry after 1 hour. Recommended layer thickness: 9-16 micron. Shelf life: 24 months, dry, cool and frost-free. Safety measures: please consult the safety data sheet.

ELASTIC PVC INSULATING TAPEStrong and dimensionally stable with high permanent adhesion on all materials. Weather-resistant and resistant to friction, water and UV rays. Thanks to its high elasticity and formability, it is easy to use on complex shapes and small connectors. Complies with RoHS3 and is made of self-extinguishing material.AdvantagesFlexible and pliable around all materials. Easy to tear. Watertight and water-resistant.Use Apply to a clean surface in overlapping windings. Press firmly. At least one winding on existing insulation or cable sheath for an optimal result.Technical specifications Composition: PVC and modified rubber adhesive. Thickness: 130 micron. Tensile strength: 26 N/cm. Elongation at break: 180%. Adhesive strength: steel: 2,4 N/cm. own top layer: 2,1 N/cm. Application temperature: 0°C to +40°C. Temperature resistance: -5°C to +70°C. Breakdown voltage: 8000 V. Insulation resistance: 100 000 MΩ. Maximum voltage: 600 V. Resistance: UV rays, acids, salts, bases, water, seawater, greases. Shelf life: 24 months, stored cool and dry in the original packaging.

ELASTIC PVC INSULATING TAPEStrong and dimensionally stable with high permanent adhesion on all materials. Weather-resistant and resistant to friction, water and UV rays. Thanks to its high elasticity and formability, it is easy to use on complex shapes and small connectors. Complies with RoHS3 and is made of self-extinguishing material.AdvantagesFlexible and pliable around all materials. Easy to tear. Watertight and water-resistant.Use Apply to a clean surface in overlapping windings. Press firmly. At least one winding on existing insulation or cable sheath for an optimal result.Technical specifications Composition: PVC and modified rubber adhesive. Thickness: 130 micron. Tensile strength: 26 N/cm. Elongation at break: 180%. Adhesive strength: steel: 2,4 N/cm. own top layer: 2,1 N/cm. Application temperature: 0°C to +40°C. Temperature resistance: -5°C to +70°C. Breakdown voltage: 8000 V. Insulation resistance: 100 000 MΩ. Maximum voltage: 600 V. Resistance: UV rays, acids, salts, bases, water, seawater, greases. Shelf life: 24 months, stored cool and dry in the original packaging.

ELASTIC PVC INSULATING TAPEStrong and dimensionally stable with high permanent adhesion on all materials. Weather-resistant and resistant to friction, water and UV rays. Thanks to its high elasticity and formability, it is easy to use on complex shapes and small connectors. Complies with RoHS3 and is made of self-extinguishing material.AdvantagesFlexible and pliable around all materials. Easy to tear. Watertight and water-resistant.Use Apply to a clean surface in overlapping windings. Press firmly. At least one winding on existing insulation or cable sheath for an optimal result.Technical specifications Composition: PVC and modified rubber adhesive. Thickness: 130 micron. Tensile strength: 26 N/cm. Elongation at break: 180%. Adhesive strength: steel: 2,4 N/cm. own top layer: 2,1 N/cm. Application temperature: 0°C to +40°C. Temperature resistance: -5°C to +70°C. Breakdown voltage: 8000 V. Insulation resistance: 100 000 MΩ. Maximum voltage: 600 V. Resistance: UV rays, acids, salts, bases, water, seawater, greases. Shelf life: 24 months, stored cool and dry in the original packaging.

ELASTIC PVC INSULATING TAPEStrong and dimensionally stable with high permanent adhesion on all materials. Weather-resistant and resistant to friction, water and UV rays. Thanks to its high elasticity and formability, it is easy to use on complex shapes and small connectors. Complies with RoHS3 and is made of self-extinguishing material.AdvantagesFlexible and pliable around all materials. Easy to tear. Watertight and water-resistant.Use Apply to a clean surface in overlapping windings. Press firmly. At least one winding on existing insulation or cable sheath for an optimal result.Technical specifications Composition: PVC and modified rubber adhesive. Thickness: 130 micron. Tensile strength: 26 N/cm. Elongation at break: 180%. Adhesive strength: steel: 2,4 N/cm. own top layer: 2,1 N/cm. Application temperature: 0°C to +40°C. Temperature resistance: -5°C to +70°C. Breakdown voltage: 8000 V. Insulation resistance: 100 000 MΩ. Maximum voltage: 600 V. Resistance: UV rays, acids, salts, bases, water, seawater, greases. Shelf life: 24 months, stored cool and dry in the original packaging.

ELASTIC PVC INSULATING TAPEStrong and dimensionally stable with high permanent adhesion on all materials. Weather-resistant and resistant to friction, water and UV rays. Thanks to its high elasticity and formability, it is easy to use on complex shapes and small connectors. Complies with RoHS3 and is made of self-extinguishing material.AdvantagesFlexible and pliable around all materials. Easy to tear. Watertight and water-resistant.Use Apply to a clean surface in overlapping windings. Press firmly. At least one winding on existing insulation or cable sheath for an optimal result.Technical specifications Composition: PVC and modified rubber adhesive. Thickness: 130 micron. Tensile strength: 26 N/cm. Elongation at break: 180%. Adhesive strength: steel: 2,4 N/cm. own top layer: 2,1 N/cm. Application temperature: 0°C to +40°C. Temperature resistance: -5°C to +70°C. Breakdown voltage: 8000 V. Insulation resistance: 100 000 MΩ. Maximum voltage: 600 V. Resistance: UV rays, acids, salts, bases, water, seawater, greases. Shelf life: 24 months, stored cool and dry in the original packaging.